RJ - It is not full on but has a 69v reading.
tbone321 - In earlier posts I wrote that both chan 12 and 14 failed to turn off even though they seemed to work during a show. The lights (a single C9) inside a pumpkin stayed lit, but dim. I set an extra LE next to the one that was failing and moved just those two pumpkins/channels over to the 2nd LE and the show worked fine (both LEs set to be chan 1-16). I also stated that I wouldn't be able to work on them until after the show came down. Well the failing unit is now sitting on my workbench and chan 12 is no longer failing. By bad plug I meant the outlet cord that was connected to chan 14. I removed it to check for stray wire strands or anything else that looked bad.
I had not tested dimming, so I just now went back and powered the board back up. Once again both Chan 12 and 14 are in a constant on and they do not dim even though all the other channels do. I do not understand how in my earlier testing today chan 12 worked fine and is not gone bad. Looks like I may have two bad triacs. I will have to order some and wait for them to come in before I can replace them. Good thing Christmas light up is about 7 or 8 weeks away.