DiyLightAnimation
Hardware => Lynx Wireless DMX => Topic started by: Freebird on June 15, 2010,
-
??? Okay on my home from work tonight I got to thinking (since texting is against the law now), So I place the wireless tx on my dongle located in my house. Then a RX on a LE, then I can daisy chain cat5 from that LE to others and the last LE I make sure it has the "terminate" jumper in. Also I place a RX on an SS4DMX and on the output daisy chain with CAT5 to an another SS4DMX then to another then to another and ensure terminate is at the last one.... Is that it???? I got to questioning myself and setup today and really got myself confused..
Freebird
-
The first half of your statment regarding the LE is absolutly correct (for LE boards version 3 and up).
If you are planning to mount the LE-RX inside of the SSR4-DMX and plug it in place of the RS485 chip, chaining to downstream SSR4-DMX will not work. If you use an "external" receiver and have the output from that receiver go into a SSR4-DMX, then yes, you can chain to another SSR4-DMX.
Larry
-
okay can I daisy chain cat5 from the an LE then into an SS4?
-
...SSR4 w/DMX.
YES! I do it all the time.
-Paul