NavyGator do you have any how to or spec,s you care to share like length of pvc looks like 3 ft . i am about to start mine and looking for ideas
I was considering a how to and started it but have not finished. I will try to in the next week or so.
These are about five feet tall and made from five lengths of 1/2 inch schedule 40 PVC, one can of Krylon hunter green plastic paint and a couple of cable ties.
The base is constructed using 8 T-fittings, 8-45deg couplers and 16-6 inch long pieces of 1/2 inch PVC (About two foot of waste PVC for the scrap bin).
The longer legs are 62in and the shorter legs are 58in long. One cut in a 10 foot long piece of pipe gives a short leg and a long leg. No waste.
From the top of the legs a 1/4 inch diameter hole is drilled at 1/2 inch in all eight legs and 4-1/2 inch on the long legs.
Everything is just a friction fit.
Run a couple of cable ties through the holes to hold the top together.
I am considering filling the top of the legs with spray foam to keep water, lizards, etc out.
I hope this helps.
Rich