Figured it out!
In the Define Lighting Networks window I had:
LOR, COM 6, 57600, Last Channel 80
DMX, COM 5, n/a, Last Channel 96
In the LOR Sequence Mapping I went to Multi-Network.
Now since I have the LOR boards and Lynx Express boards shown as what they are in LSP after I export the LOR S2 sequence I have to add the:
network="1" in front of every channel that is DMX.
That should of worked but it doesn't because all 96 DMX channels exported from LSP are all on unit 1. So if you look at the info in xlights you will see even though you say you have 96 channels in the Define Lighting Networks it only "sees" 1 unit with 96 channels so it only maps the first 16 channels.
So I changed one of the DMX unit 1 unused channels to unit="6" (6 boards * 16) and then the info in xlights shows this:
LOR sequence Aux A network, units 1-6 map to DMX on COM5 channels 1-96. So even though I defined 96 DMX channels, apparently xlights reads the .lms file and only see's unit 1 and only does the first 16 channels.
I have it working, but maybe xlights on a multi-network can look at the Last Channel defined and avoid looking at the lms file for how many units are in it. Since all DMX is unit 1 in my case, I'll never map more that the first 16 channels.
Now that xlights played the sequence, wow was it awesome--great job dowdybrown!