Does anyone have the updated link for the known working PICkit3 software that is working with either Win 7 or Win 8.1?
I have been trying to load the DMX firmware back onto my etherdongle and not having much luck.
If I use the 1.0.0.0 version, it will not discover the PICkit device and simply locks up with a "PICkit 3 not connected" and a "Microsoft .NET Framework" error (see image: capture1) I have attempted several new and older versions of .NET but have had no luck
I have also loaded PICkit3 V3.00.00 and with this I have been able to get the PICkit3 to connect and find the correct chip set for the etherdongle. I am able to erase the chip, and write the .hex file to the chip or so it says. (see image: capture3) Capture4 is what I get when I do a read of the chip
After programming, when I plug in lights, they go out like I have a DMX signal, but I do not get any light control. I have another etherdongle that I have used (programmed before on my PC) to verify my software is providing light output. Any help to my issue would be great!