DiyLightAnimation

Hardware => Lynx Aether => Topic started by: OneHotRT59 on February 27, 2012,

Title: AetherII Assembly Manual typo!
Post by: OneHotRT59 on February 27, 2012,

Looking through the assembly manual today for the AetherII.

In the power section, there is a typo that states each AtherII draws 35 Amps...


Power

Take note that the AetherII uses 12v AC current, and NOT DC current like LED strings, hubs and many other Lynx devices. You must use a 12v AC transformer. A common solution is to use a separate (or existing) landscaping power supply. Figure about 35amps per Aether2.

That will be one hot LED !!! <md..

The summary page states 35 watts which is what I would expect. !

Randy B

Title: Re: AetherII Assembly Manual typo!
Post by: n1ist on February 27, 2012,

I changed it from amps to watts.  Makes more sense now.
/mike