I can't seem to find any information on how everything with the ethernet dongle and all the accessories connect, so this is what I am assuming. Can someone please let me know if there is correct, and if not, where I am wrong...
A conductor connects to an Ethernet Dongle (ETD) and is used to run a show without a computer. For every conductor you plan on using, you would need an ETD. Without an ETD, a conductor is useless.
A slave unit also connects to an ETD. This receives a signal from the conductor (via additional wireless devices) to run the show in different areas. For every slave unit you need an ETD. Without an ETD, a slave unit is useless. Multiple slaves can be run from a single conductor. There would be no purpose or way to connect a conductor and a slave to the same ETD.
A trigger unit connects to an ETD. This runs a show without a PC, based on a trigger being used. Every trigger needs an ETD, and would be useless without it. I am not certain if a trigger can connect to the same ETD that a conductor or a slave is connected to.
Thanks in advance for any corrections.
Jon