DiyLightAnimation
Software => Light Show Pro => Topic started by: kernal on January 18, 2014,
-
Anybody have a sample of a sequence for a singing face they would be willing to share? Also, what controller is the ssr4 that is dmx capable. Or can i use it without the freestyle? Please say yes... lol
Kernal
-
You can add the DMX option to the SSR4 and that makes it an independant 4 channel DMX controller.
-
These have the dmx option, but i dont see the controller in LSP colum
-
That is because the SSR4 is not an output device. It receives DMX signals and controls the lights. You would need some type of DMX dongle to sent the DMX signal that it uses. You can use the Lynks DMX dongle, the EtherDongle flashed with DMX, the output of the DMX converter from the smart hub or any or the other DMX output devices in the LSP list.
-
Ok. I do have a lynx dongle. How do i address the 4 ch's? Do i load a freestyle even tho i dont have one?
-
You can load a Lynx Express, just make it 4 channels.
-
If you look in the WIKI it will show you how to set a starting address for the SSR4. Once that is set, then you just use it and the next three channels in your sequencer. All you should have to set up is the lynks dongle. That is the output device. The sequencer doesn't know or care what devices that you are controlling (with the possible exception of RGB or single), only how to get the signal out.
-
Lol... see tbone, this is why i need to attend a mini! Again, THANK YOU for all your help! <res.
-
Gman, i have 4 ssr4's... so i could use an express and just label them as those 16 ch's... you fellas are gonna learn me something yet!
-
You are welcome and no problem. I have yet to attend a mini myself. I just don't see any here in NC. RJ did say that he was planning a convention this summer but I don't believe that a date has been set yet. If and when one is set, I would suggest that you attend as there is much to learn.
-
Yeah I really really want to. Its all going to depend on timing.
-
Gman, i have 4 ssr4's... so i could use an express and just label them as those 16 ch's... you fellas are gonna learn me something yet!
There you go, and you are at the right place to learn for sure. Have you programmed the start channels on your ssr4's?
-
I don't use LSP so what exactly is the purpose of defining the controllers?
-
LOL... nope. actually dont even have them yet! >:D And im not sure how to do that yet... last year was my first year with Lynx equipment with 2 expresses. Before that was just the typical Mr Christmas 6 ch outdoor box. I did pretty well if I say so myself... my wife and neighbors were all happy (mostly cuz of the FM transmitter i think) haha
-
Pm me if you need some more exact LSP help.
Just pull a Lynx controller into your sequence. Right click on it and choose configure. Instead of 16 channels put 4, and rename it. on the channel tab you can change what channel the 4 start at.
Alan
(http://www.webbyhome.com/images/20140118_LSP-SSR4-config.jpg)
-
Awesome. Thx. I literally just put the computer away for the night. Will check it out tomorrow.
-
That assumes you are using a dmx dangle.
Sent from my Sony Tablet S using Tapatalk 4