DiyLightAnimation
Store => Finished COOPS => Topic started by: RJ on November 16, 2011,
-
Because I am out of these and I am over run with pms asking for more with all the new members joining so I am running a coop for just the pcbs and heatsinks. No parts are included as with a full coop.
This is a coop for LYNX Express pcb and heatsink.
The coop will be have two items to order.
The PCBS and heatsink will be $17 at most and could be down as low as $15 if the amount of this coop and the Express coop add up to enough.
The coop will run till nov 20th at 8:00 pm E.S.T. I must have 50 or the coop is cancelled as we can not afford to have less of them done.
All coop rules will apply.
shipping will be a regular medium flat rate usps box at the rate to your location.
$10.50 in US
Post in this thread the number you want. You will get a pm when the coop closes telling what to do to pay for you coop items.
RJ
-
Member Name | ordered | Paid |
AaronS | 1 | Yes |
bendala | 2 | Yes |
btdb1969 | 4 | Yes |
bubblehead | 1 | Yes |
CajunLights | 3 | Yes |
combustionmark | 10 | Yes |
devoidelk | 1 | Yes |
dlhoppe | 2 | Yes |
dridas | 4 | Yes |
glinn | 2 | Yes |
jason_ | 4 | Yes |
jasona | 2 | Yes |
Jasonlnlv | 5 | Yes |
joatman66 | 10 | Yes |
jramirex | 3 | Yes |
jstevens | 2 | Yes |
jtlowry | 5 | Yes |
kgustafson | 2 | Yes |
Khaler | 4 | Yes |
kj77rn | 2 | Yes |
koropuxa | 3 | Yes |
melwell | 4 | Yes |
monkey141 | 4 | Yes |
mordtech | 5 | Yes |
NeverBRich | 4 | Yes |
Open | 18 | |
PyBir8d | 5 | Yes |
raginsyko | 3 | Yes |
robelent | 2 | Yes |
rrawlings | 2 | Yes |
sadkisson | 4 | Yes |
shaunkad | 6 | Yes |
smartcontrols | 6 | Yes |
soakes94 | 1 | Yes |
Sparky96 | 4 | Yes |
Steve Gase | 8 | Yes |
stormym | 5 | Yes |
tmcteer | 4 | Yes |
travailen | 5 | Yes |
trevorstoy | 2 | Yes |
wbuehler | 8 | Yes |
z327 | 4 | Yes |
| | |
| | |
Total : | 176 | |
-
4 Express PCB's w/ heatsink
Thanks
Tom
-
4 PCBs w/ heatsinks.
Thank you,
-Jason
-
3 for me. Thank you.
jramirex
Sent from my SPH-D710 using Tapatalk
-
I would be looking for 1 maybe 2 but the postage to the UK is over $45 which seems quite a lot for 2 circuit boards. Is there anyway of lowering this cost?
-
4 Lynx Express PCB's w/ heatsinks
Thank you.
-
If possible, I am interested in 1 PCB.
Let me know if you can do this.
Thanks,
Aaron
-
8 please
Thanks
Bill
-
2 please
-
10 for me please.
-
RJ,
could you put me down for 5 PCBs and heatsinks?
thanks much.
-
RJ -
By my count, you've got at least 41 reservations right now.
Add 2 for me, please.
-
Eighteen (18) pcb/heatsinks for me please!
Thanks, Donny
-
3 for me please.
Thanks
Stephen
Sent from my Desire HD using Tapatalk
-
4 for me plz pcb/heatsinks
Thanks,
Scott
-
I'll take 4.
Sparky96
-
4 please
-
If there is no cheaper way of posting the PCB and heatsink to the UK I may need to drop out as its $45 dollars or £30 just for postage which is to much since that doesnt include the PCB or parts.
Steve
-
2 please
-
I would like 4 w/heatsinks, wife might kill me but i'll take that chance.. >:D
Thanks Tim
-
4 for me please.
-
I would like 3 please
-
Can I add 1 more to mine, I would like 4 total.
-
5 for me please
-
8 please. (I might as well prepare for my plan to replace my LOR controllers... :) )
-
1 and chuck me up for the dongle pcb also
-
1 and chuck me up for the dongle pcb also
For the Dongle you will have to check the DLA Store about getting that.
Rick (the helper Elf) R.
-
2 Please any chance we could make this a kit since there are so many people
-
6 for me please
-
put me in for 6 just don't tell my wife
-
Please put me down for 4 PCBs + Heatsink.
Thanks!
-
I'll take 3 please.
--MikeC
-
Add 1 more to my request please. (So it will be a total of 5 for me.)
-
2 for me please.
Thanks
-
Please put me in for 4 PCB's and associated heatsinks.
Thanks,
Mark.
-
I'll take 2 PCBs with heatsinks please!
-
I will take 5.....
-
3 for me please
-
I will take 2 please.
Thanks,
Chris
-
5 PCBs w/heat sinks please!!
Thank you!! :)
--Will
-
I would like 5 PCBs and 5 Heatsinks please.
Thank you for the extra effort.
Rick S
-
10 for me.
Thanks
-
I will do 4 with heatsinks please.
Thanks.
Mike
-
I would like 2 pcb's and 3 heatsinks.
Thanks
Gary
-
I would like 2 pcb's and 3 heatsinks.
Thanks
Gary
Since there is only one price I don't know if RJ will order extra heatsinks.
Rick R.
-
2 pcb and heatsink coop
please
-
put me in for two (2)
Thanks
Robert
-
Please put me down for 1 PCB and 1 heatsink.
--Mike
-
Just an FYI that I will be sending out the payment notices...etc.. for this Co-Op.
Bill
-
It will take a few days to get everything together as I am trying to help get the show out.
Bill
-
So everyone understands,
Bill was extremely generous and offered to help me out by running this coop for me. Thanks Bill
With the EtherDongle coop and family things it will really help. I almost did not do this coop but so many were needing express stuff I couldn't help it. Then when Bill offered I jumpered at it. Man teach him to offer <yk..
RJ
-
Also wanted to state that currently this CO-Op is for an LE PCB and HeatSink combo.
At this time there is no heatsink only option, I will check with RJ to see if we can offer a hearsink only option.
-
As far as shipping to another country, The issue is that the PCB size causes the need to use the Medium Flat Rate Box.
Shipping options to non US countries are kind of limited with Flat Rate and the USPS.
-
Also wanted to state that currently this CO-Op is for an LE PCB and HeatSink combo.
At this time there is no heatsink only option, I will check with RJ to see if we can offer a hearsink only option.
After doing some checking there just is not enough time to do orders for extra heat sinks.
Due to processing time and the holidays the machine shop needs the order today. There will be however extra heat sinks ordered that can be ordered from DLA Store just like the PCB's are done after the Co-Op is filled.
Bill
-
I am currently setting up my show so it will be a bit before any payment notices go out.
Please do not worry as no notices have been sent out yet.
Bill
-
Because I have received a few PM's I want to set everyones mind at ease of this coop. I had already order the stuff after it closed since I knew it would be a while before the payments got handled and it takes a while to get the heatsinks and pcbs made. So it is moving just as fast as always with no delay, the stuff has not come in for it yet.
RJ
-
To All Co-Op members.
Yes I have delayed this a bit while working on my show, at this point I have the show running well enough I can now get back to this.
Please double check your totals and let me know if there are any errors, I will be sending payment notices Monday or Tuesday evening.
Again sorry for the delay.
Bill
-
All payment notices have been sent, please check your PM's.
Also please remember to add the cost of shipping for your area listed in the PM with the cost of your kits also listed in the PM.
Thanks
Bill
-
Topic unlocked.
If you did not receive a PM and you are in the Co-Op, please let me know.
Bill
-
List updated
Bill
-
List updated.
Please get your payments in.
Please check your PayPal notices as some payments had to be refunded due to missing forum ID's. If you have made your payment and do not see your name on the list as being paid, please send me the transaction ID in a PM so that I may track it.
Thanks
Bill
-
Bill,
I had to resubmit payment. I PMd you the details.
Thanks,
-Jason
-
Bill,
I had to resubmit payment. I PMd you the details.
Thanks,
-Jason
Yup
Got it
Thanks
Bill
-
I noticed you have open as 18 are these extra from people backing out. there is no one by that name on the forum
-
I noticed you have open as 18 are these extra from people backing out. there is no one by that name on the forum
if these are extra, I'll buy 2 more. just let me know and I'll send the money.
-
Only a few left to pay, please get your payments in by December 15 2011 or orders will be dropped from the Co-Op.
Thanks
Bill
-
I realize I'm very, very late but I'm a newcomer to the forum and would love to get in on the co-op. If its not going to be a terrible amount of trouble I would love to pickup 2 of them. Otherwise I'll gladly wait until the next go around.
Thanks,
John
-
I would like to get included if possible for 2, or pick up 2 of the unpaid for. If not I'll wait till the next time. Thanks, Tony
-
I have boxes on order, parts have been paid for.
At this time we are just awaiting parts to come back from the manufactures.
Bill
-
If there are spares, please could I grab 4 of them? Apologies if not.
Thanks
RD
-
This is an old Co-op?
If there are extras Ill take 1
-
Same here i'd like 2 or 3 of them also
thanks
Ralph
-
after every thing is shipped out to coop members you should be able to get the le boards and heat sinks from RJ
-
3 PCB w/ heatsink please.
Josh
nvm I saw last post in the forum was from 12/18 and thought for a second this coop was open still.
Well I'll keep an eye out for another one to open then I guess.
Is there any other way to order the PCB and heatsink?
-
read the post above yours
-
6 for me
thanks
-
This thread should be locked until the wbuehler or RJ has something to say.... Just my opinion
-
6 for me
thanks
The co-op closed a month ago. There may be spares, but by my count, I think those 18 listed as open are already spoken for.
-
RJ will have some available after the ones for the Co-Op have been filled.
Bill
-
Awaiting shipping boxes and parts.
Bill
-
any updates?
-
I'm wondering the same thing because another full express coop just finished....
-
Heat sinks and PCB's just arrived so the packing can begin.
Bill
-
Thanks for the update. :)
-
Ty... and sorry if I sounded rude im just anxious ;D
-
Packed And Ready For Shippment
Bill
-
Yippee, oh wait, I'm not in that one, never mind. ;D
-
Yippee, oh wait, I'm not in that one, never mind. ;D
Well, I am... Yippee!! :)
Already have my mouser and monoprice parts... I'll just need cases, now!
-
Thanks Bill you are Awesome!!!!! <res.
RJ
-
No Thanks needed, JJ had the heat sink and heat sink parts already sorted.
So I just need to pack it out.
I have the shipping list imported and should be able to get them picked up this up coming Tuesday.
Bill
-
Yippee, oh wait, I'm not in that one, never mind. ;D
Well, I am... Yippee!! :)
Already have my mouser and monoprice parts... I'll just need cases, now!
Did I miss some thing what are monoprice parts ?
Thanks Bob
-
Yay im in there somewhere ty Bill
-
Did I miss some thing what are monoprice parts ?
I used monoprice for my 110v power cables that will be cut down to create pigtails.
-
Bill,
Thanks for your hard work. I can't wait to get my first DLA boards.
Thanks again,
Mike
-
I missed this COOP (beating self over head w/ soft bat), will there be any PCB's w/ heat sinks avaiable? If so, will RJ list or would I have to request them?
Kinda new to this - so be patient w/ me (OOOF!!!- bat again)
Bill A.
-
I missed this COOP (beating self over head w/ soft bat), will there be any PCB's w/ heat sinks avaiable? If so, will RJ list or would I have to request them?
Kinda new to this - so be patient w/ me (OOOF!!!- bat again)
Bill A.
RJ has mentioned in another thread that there will be another express coop starting very shortly. Just make sure you keep an eye out for the coop so you don't miss out again.
-
All boxes have had postage applied and are ready to be dropped off tomorrow.
Bill
-
All boxes have been dropped off at the post office.
Because I had to import the shipping list, they did not give me the ability to import an E-Mail address so you will not receive a shipping E-Mail unless you were outside the US.
Bill
-
Thank you for your efforts, sir.
I'm looking forward to getting my boards.
-
Thank You! For all your hard work.
<res. <res.
Rick S
-
Thank you for your efforts, sir.
I'm looking forward to getting my boards.
And again, thank you! The boards and heat sinks just arrived!
That was fast; you just sent them yesterday.
-
Thanks for the COOP! Just got a knock on the front door and received my PCBs and heat sinks. Now I have a project to keep me busy after the kids' Cub Scout Pinewood Derby!
Kurt
-
Got mine today, thanks! <res.
-
I got mine as well too. Thank you Bill and RJ!
-
Me too! Thank you!
-
Got my lil package today... ty bill and rj
-
Mine showed up today!!!
Now to get the parts ordered!!
Well done..
-
Received Mine today as well! Had to go pick it up since they didn't leave it yesterday due to the snow <fp.
-
Ya the snow is nuts in the northern midwest.
-
received mine thanks for the coop!!!
-
Built and test last night all is a go! Thanks Again!
-
Recieved boards woohoo!! Thanks for coop. Now Moving onto Mouser order.
Thanks again for the Coop.
Tim
-
please close this is annoying confusing and incorrect
-
This seems totally understandable and correct to me.
The coop, which is closed now, was for the Lynx Express PCB and heat sink only. No BOM, no case. What's confusing and/or incorrect about that?
-
its not a locked or closed thread , it is showing as a current coop .
-
This Co-Op has finished, it was left open as the packages shipped in case there were any issues with the kits themselves.
This Co-Op will be closed and moved to the Finished section before it causes the sun the implode.
Bill
-
or me to try to place an order!!!