DiyLightAnimation

Software => Nutcracker: RGB Effects Builder => Topic started by: rdebolt on December 21, 2013,

Title: Auto reverse.
Post by: rdebolt on December 21, 2013,

I am not sure if I am doing something wrong, but on my arches using an auto reverse it carries the chase too far one direction. Is there a way to just make it bounce back and forth? Needs to be fast paced.

Thanks,
Roger

Title: Re: Auto reverse.
Post by: JonB256 on December 21, 2013,

Single String Effects (bottom of the list) are probably what you need.

Title: Re: Auto reverse.
Post by: rdebolt on December 21, 2013,

You are not allowed to view links. Register or Login

Single String Effects (bottom of the list) are probably what you need.

Thanks Jon... That is what I am using, but if you select direction "right to left" for example, the lights go father down the left side before coming back. I would expect or should I say want them to switch direction as soon as the first light hits the bottom.  That is my wish anyway!

Thanks,
Roger

Title: Re: Auto reverse.
Post by: JonB256 on December 21, 2013,

I tried what you are doing and had the same results.

Closest I could come was using Bars, with a two colors, one of them Black. going Right or Left.

 

Title: Re: Auto reverse.
Post by: mitch09 on December 21, 2013,

Have you tried curtain effect, "open the close"?

Title: Re: Auto reverse.
Post by: rdebolt on December 21, 2013,

Thanks guys! I was hoping that I was just doing something wrong! Bars comes close, but not the effect I was looking for.

Roger