DiyLightAnimation
Software => Nutcracker: RGB Effects Builder => Topic started by: MrChristmas2000 on December 21, 2012,
-
I created two effects with my arches.
The first was a Right moving arch effect SS_ARCH_RED_GREEN_01.
That seems to be correct and the resulting code seems to look ok in my visualizer.
The second was a Left moving arch effect SS_ARCH_RED_GREEN_02.
The first thing that was obvious was the resulting animated gif showed the effects going to the left but each segment was not going from 0 to 100 but from 100 to 0 ramping.
The output code was not even close to the animated gif.
One more thing to note is that I was using the 3D effect. If you don't use that you will not see the problem.
Am I doing something wrong with my configurations?
Thanks