DiyLightAnimation

Hardware => Lynx SSR4 => Topic started by: kenjreno on November 18, 2010,

Title: Programming Software
Post by: kenjreno on November 18, 2010,

I was attempting to download the software to allow me to program the SSR4, but the link on the Wiki for the Lynx Address Utility is downloading the DMX Deck.. Is this correct?

Title: Re: Programming Software
Post by: rrowan on November 18, 2010,

Nope some how it got mixed up

I corrected the link and its now working

Cheers

Rick R.

Title: Re: Programming Software
Post by: kenjreno on November 18, 2010,

You are not allowed to view links. Register or Login

Nope some how it got mixed up

I corrected the link and its now working

Cheers

Rick R.

Thanks. Got it now.

Title: Re: Programming Software
Post by: wftxlites on May 30, 2011,

I am having trouble locating the Lynx Address Utility. It is the same problem mentioned above. The SSR, Freestyle, and MR16 manuals all have a bad link to DMX Deck.

Thanks to anyone that can HELP,

Greg

Title: Re: Programming Software
Post by: rrowan on May 30, 2011,

You are not allowed to view links. Register or Login

I am having trouble locating the Lynx Address Utility. It is the same problem mentioned above. The SSR, Freestyle, and MR16 manuals all have a bad link to DMX Deck.

Thanks to anyone that can HELP,

Greg

Try here

http://diylightanimation.com/wiki/index.php?title=Software

Rick R.

Title: Re: Programming Software
Post by: wftxlites on May 30, 2011,

Thanks, I feel  :-[

Greg

Title: Re: Programming Software
Post by: wftxlites on May 30, 2011,

 :)
Yeah, 1st DMX SSR Complete and WORKING!

I had some pain to make this first one address, but finally read RJ's second set of instructions. That worked great!

Power on then move the jumper, coutn to 3, and unplug. Reverse the jumper and plug back in. Tested with DMX Deck.

Yeah, Yeah, YEAH!!!!!

Thanks Again for the speedy response.

Greg