DiyLightAnimation
Fun => The Porch => Topic started by: tpctech on October 03, 2009,
-
Well I finished all (15) of my SSR4-DMX, and 2 LE's.....all have been tested and addressed. I now am to the next step to order enclosures for the SSR4's and the LE's. I also have a couple LOR PC boards that need boxes. I use a standard 12x12x6 PVC j-box for my controllers. See pictures.
Today I mounted my wireless boards in the shiny new nice cases. I found 1 slight issue. The antenna connector does not get tight due to the board position. I found on the Receivers if I drilled out the holes on the PCB slightly I was able to slide the board enough to get the antenna snug. On the TX boards I only need to drill the bottom 2 holes.
This is a picture of my enclosures I plan on using for the LE's It is the same I have used for my LOR boards in the past.
I have way to much to get done before lights on!
KEN
-
Pretty smooth work there Ken... your lines are even straighter than mine! :)
John
-
My first job out of college was working for an industrial automation company wiring control panels!! The boss would even make sure all of the wire tags were lined up down a length of terminal strips it does make a great visual difference! I will post a picture of my LE box when I get it done!
Thanks
KEN
-
Nice work