DiyLightAnimation
Hardware => Lynx Aether => Topic started by: batdive on November 10, 2010,
-
Thought I would centralize (until the Wiki gets updated) the information that has been gathered to help others as they start the building process...
Updated Legend can be found here:
http://diylightanimation.com/index.php?topic=3122.msg66697#msg66697
Resistor break down is listed in above legend except for
R7 - 3.9 Ohms 5%.
Resistor note:
R3 - 2 places only one is "needed" (one by the green LED) the other middle of board near the mosfet is only if you choose to use the external fan option.
Diode orientation:
Per RJ he misspoke on the video and the line goes to the LEFT of the board, which is toward the side with NON-squared off side.
LED Constant Driver Pin 1 location refer to this post with pic to help:
http://diylightanimation.com/index.php?topic=3618.msg66716#msg66716
Hope this helps as I was trying to find everything and wanted to consolidate it.