Updated -
Matt can you explain the IP address for e1.31 ... what should it be fore the ether dongle?
Harrison
Assuming that LOR does get version S3 released soon, and
Assuming that they have done something making their XML formatted sequence files incompatible, then
can I assume your time schedule may make another update unlikely?
Updated -
Matt can you explain the IP address for e1.31 ... what should it be fore the ether dongle?
Harrison
I don't have an ether dongle, however, I assume that from an E1.31 perspective, it looks like 32 DMX universes. So to support all 16K channels you would need 32 entries in the xLights network setup screen.
IP Addr Universe LastChannel
239.255.0.1 1 512
239.255.0.2 2 512
239.255.0.3 3 512
etc.
I'm multi-casting from xLights to a DR4 as I write this with no issues :)
Matt
Might as well dork out for a second to make sure I got this right (also help laymen) – so for xLights and Smart String I will need to setup 32 universes / networks like below – also how to MAX out a E1.31 universe (to make sure I understand E131):
In your spreadsheet, Last Channel should 512 (or less) for each universe - it is the last channel used on THAT specific network.
Not sure what you mean by "MAX out a E1.31 universe". Could you elaborate?
LOR Network | LOR Unit | Start Circuits | Number of Circuits | > | xLights Network | LOR Unit | Start Circuits/Channel | Comment |
R | 2 | 1 | 512 | 2 | DMX | 1 | Map 512 channels on the Regular network unit 2 to the entire universe on xLights network 2. i.e. an iDMX controller | |
R | 3 | 1 | 16 | 3 | DMX | 32 | Map 16 channels on the Regular network unit 3 to DMX channels 32 to 47 on xLights network 3 | |
R | 4 | 1 | 16 | 3 | DMX | 48 | Map 16 channels on the Regular network unit 4 to DMX channels 48 to 63 on xLights network 3 | |
A | 4 | 1 | 16 | 3 | DMX | 48 | Map 16 channels on network A unit 4 to DMX channels 48 to 63 on xLights network 3 | |
R | 9 | 1 | 8 | 1 | 9 | 9 | Remap LOR controller 9 on the regular network circuits 1 through 8 to LOR controller unit 9 circuits 9 to 16 on the xLights network 1 | |
R | * | * | * | 1 | * | * | Catch all entry |
XLights xScheduler keeps closing after one song in the playlist has played. What should I do to remedy this? I'm not using any scripts. It says that it will repeat until 11:45pm.
Also tried with the script. Keeps dying after first song runs. I've tried switching up the order and that doesn't seem to make a difference.
Any ideas? would a screen shots or video capture be helpful?