DiyLightAnimation

Hardware => Lynx MR16 / 16 CH DC Controller => Topic started by: rrowan on March 16, 2012,

Title: Request for New Pictures
Post by: rrowan on March 16, 2012,

Hi Folks,

For anyone who was in the MR-16 Coop in January. If you have not built the kit yet and you are willing to take pictures of each step. Please let me know so we can get the manual updated. The pictures need to be bright and sharp so its easy to see each part. I normally take the pictures with the camera on a tripod and a 2 sec timer delay so the picture are not blurry.

Thanks

Rick R.

Title: Re: Request for New Pictures
Post by: Rod R on March 16, 2012,

Rick

I'll PM you as I have not built my kit yet.

Rod

Title: Re: Request for New Pictures
Post by: cavu2u on March 16, 2012,

The bigger, the better.

My eyes aren't what they used to be and I like to zoom in.

Title: Re: Request for New Pictures
Post by: Nightowlz1966 on April 09, 2012,

Hey Rick
Do you have the pics yet, as I am just starting to build mine I would be happy to take the pics,
What order should I put the Diagnosic LEDS on , and  how do I tell the polarity of the LEDS?
This is my first build be patient with me LOL......

Title: Re: Request for New Pictures
Post by: Rod R on April 09, 2012,

He is waiting for me, I will do it first part of this week.  Last couple of weeks I was slammed with work and family stuff.  The long leg of the LED is the Anode or + and the short Leg is the Cathode  or - (it will also have flat but sometimes hard to tell on some LED's)

Title: Re: Request for New Pictures
Post by: Rod R on April 09, 2012,

You are not allowed to view links. Register or Login

to clarify Rod's typo, the shorter lead from the LED is the cathode and it connected to "-"

Yep Chris is correct went back and fixed it.  :o