Hardware > Lynx Smart String
Wiring/Connector for 4-wire pixels?
(1/1)
jwilliams31:
I bought a bunch of pixels off of Amazon, and I noticed that they seem to be using 4 wires. Two for power and (I'm assuming) two for data. Since the controller is only designed for a 3 wire, any thoughts on how this might be wired?
I've attached a screen shot from the Amazon picture. I'll try to get a better picture from the actual pixels when I get home.
Thanks.
jwilliams31:
Never mind. I looked at the specs for the lights online and found what the wire colors are:
Connection: Red: +12V; White: DATA; Blue: GND
So apparently the ground (Blue) is just split between the two connectors, so I should just need to splice them together into the 3-wire connector.
JoeFromOzarks:
Glad you found the answer!
It might help if you provide the link to the Amazon page and especially the documentation for the product you bought.
Thank you,
:) joe
You are not allowed to view links.
Register or LoginI bought a bunch of pixels off of Amazon, and I noticed that they seem to be using 4 wires. Two for power and (I'm assuming) two for data. Since the controller is only designed for a 3 wire, any thoughts on how this might be wired?
I've attached a screen shot from the Amazon picture. I'll try to get a better picture from the actual pixels when I get home.
Thanks.
--- End quote ---
Navigation
[0] Message Index
Go to full version