Just now testing my ED. Flashed for DMX. (verify was good)
I have xLights outputting data to 4 Multicast Universes. Wireshark shows four universes of data being sent (239.255.0.1 and 2 and 3 and 4) by xLights.
When I connect the ED to my ethernet switch, the MagJack flashes a few time like it is trying to sync up with the incoming data, and then lights up the yellow and green lights. The green LED on the ED is on until it syncs, then it goes off and stays off. It comes back on when I unplug the ethernet cable.
As I vary the output from light to heavy in xLights, the yellow light flickers faster or slower as I think it should. The green MagJack light goes solid.
But - I get no blinky on the connected Lynx Express (it is flashed for DMX). The Data Link light on the LE is on solid. but no blinky.
The small Green LED on the ED goes OFF as soon as the Ethernet / Multicast synchronizes.
Unplug the CAT5, that LED comes back on. Is that normal?
I'll test some more tonight. Any thoughts would be appreciated.
This is very similar to sabie's post: You are not allowed to view links.
Register or
Loginexcept that green light on my ED is going OFF as soon as the MagJack makes its Multicast connection. I'm also getting indication that DMX is being received by the LE but no blinky.