DiyLightAnimation

Hardware => Lynx SSR4 => Topic started by: zwiller on February 07, 2013,

Title: Assembly manual for V2 not in wiki
Post by: zwiller on February 07, 2013,

Try to sell a few v2 pcbs and some questions have arisen to parts.  Noticed the manual for v2 is missing.  Anyone have BOM and/or assembly manual for v2 SSR4?  I have the transformers.  MANY THANKS!

Title: Re: Assembly manual for V2 not in wiki
Post by: chrisatpsu on February 07, 2013,

http://www.diylightanimation.com/wiki/index.php?title=Manual_SSR4

the current one is the V2

Title: Re: Assembly manual for V2 not in wiki
Post by: zwiller on February 07, 2013,

Thanks Chris.  Can you please confirm for me this is correct voltage reg for v2?: 

http://www.mouser.com/ProductDetail/STMicroelectronics/L7805ABV/?qs=xv3lWMc77RfDowMbrj6NxQ== (http://www.mouser.com/ProductDetail/STMicroelectronics/L7805ABV/?qs=xv3lWMc77RfDowMbrj6NxQ==)

BOM says v2 but it is v3? http://diylightanimation.com/index.php?topic=9049.0 (http://diylightanimation.com/index.php?topic=9049.0)

Title: Re: Assembly manual for V2 not in wiki
Post by: chrisatpsu on February 07, 2013,

someone who's dealt with the v3 can answer better than me, but i think both use the same parts, just a diff transformer?

Title: Re: Assembly manual for V2 not in wiki
Post by: zwiller on February 07, 2013,

IIRC only difference between v2 and v3 are tranny and voltage reg.  Since the voltage reg in the manual does not match the current BOM I assume it's the correct voltage reg for v2. 

Title: Re: Assembly manual for V2 not in wiki
Post by: dmaccole on February 11, 2013,

v2: Neat blue transformer, L7805ABV regulator

v3: Funky metal and wrapped transformer, TS2940CZ50 regulator.

\dmc

Title: Re: Assembly manual for V2 not in wiki
Post by: zwiller on February 11, 2013,

Thanks.