DiyLightAnimation
Hardware => Lynx Aether => Topic started by: chrisatpsu on March 29, 2012,
-
can i run it without a lens to get a wide floodlight?
-
found my answer...
An Aether II only uses one Lense per light unlike the Original which took 6 lenses per light.
They are the:
FL model - Flood light which is 35 deg
NF model - Narrow Flood which is 24 deg
SP model - Spot which is 15 deg
You also can use no lens for the widest flood which will light a large area up.
RJ
-
I run mine with no lens and very happy with spread
-
how far away from the object you're lighting? and how wide did it throw?
-
3' away I get a bright 10-12' spread. http://diylightanimation.com/index.php?topic=7008.0 (ftp://diylightanimation.com/index.php?topic=7008.0) Bet you can get 20-25' at 6' away or so but less bright but doable.
-
This may help with angle of lenses, to gauge on the rough throw of light.
-
This may help with angle of lenses, to gauge on the rough throw of light.
thanks for the graphic, but i don't know the angle with no lense
-
Pretty sure the led is 120 deg and the case wont affect or limit it.