DiyLightAnimation

Hardware => Lynx Express => Topic started by: battle79 on November 25, 2013,

Title: Strange outputs - fading one output, all come on at 30% and fade <solved>
Post by: battle79 on November 25, 2013,

OK, ready for weird.

When I turn on a output - no problems at all, and output ramps up to full on no worries.

When I ramp down an output from full on to off, at about 30% all other outputs come on at 30% and ramp down with it.

Turn on another output and ramp up as normal, ramp it back down and all outputs follow @ 30% again.

Anyone ever seen this behaviour before?

Cheers,
Rowan

Title: Re: Strange outputs - fading one output, all come on at 30% and fade
Post by: battle79 on November 27, 2013,

Tracked down the problem. It's nothing to do with the Lynx Itself.

Problem was the Android App for sending out e1.31 and DMX test signals. It causes all other DMX channels in the DMX universe to come on at 30% and ramp down with the original channel.

Tested with da_e1.31 from https://www.audiovisualdevices.com.au/software.php

Works perfectly with above and also with sequence from vixen3.

Cheers,
Rowan