DiyLightAnimation
Store => Sale/Trade => Topic started by: taybrynn on January 30, 2016,
-
DLA Etherdongle - $80 + Actual shipping + paypal fees
Unit is fully assembled and in a conductor cutouts enclosure. (no conductor installed)
This was my spare, so this unit still needs to be flashed with a pickit3 (I do not own one) with the pixelnet firmware
you want (there are 3 versions, depending on what pixelnet universes you want -- see the DLA wiki for the firmware files).
This takes E1.31 in and outputs 16k channels of pixelnet.
Note: I am selling for $10 below kit cost because this unit does not have the 6v 1A power supply.
It costs around $5 on amazon:
http://www.amazon.com/dp/B009SNJ0NS/ref=wl_it_dp_o_pd_nS_ttl?_encoding=UTF8&colid=1UTF7ARXTKS6N&coliid=I1T4YJZOJHWKZQ (http://www.amazon.com/dp/B009SNJ0NS/ref=wl_it_dp_o_pd_nS_ttl?_encoding=UTF8&colid=1UTF7ARXTKS6N&coliid=I1T4YJZOJHWKZQ)
-
Added picture.
This has the cutouts for the conductor, if desired.
-
Price reduced to $80 <la..
You can also flash it for DMX if desired. Most would not, but can if you want. Can later flash back to pixelnet with a pickit3.
This is a great E1.31 to 4 x 4k pixelnet (16k total pixelnet channels ... range determined by firmeware flashed) ... but it can also do a single DMX512 if desired.
Typical setup might look like this:
PC ---> [ optional network hub/or/router ] -----(ethernet E1.31)---> Etherdongle (this) ----(pixelnet)--->> ss active/or/passive hub --> active/passive hub --> zeus v1/v2 --> zeus v1/v2 ...
Plays nice with most Falcon hardware also.