DiyLightAnimation

Hardware => Lynx Express => Topic started by: masterelectrician2112 on November 04, 2014,

Title: Programming LE curves
Post by: masterelectrician2112 on November 04, 2014,

Hello all,

I know I can't use the etherdongle to program my LE curves.  Is there anything besides the Lynx DMX Dongle that will program the curves via the Express utility?  Will the Entecc Open DMX work?

Title: Re: Programming LE curves
Post by: tbone321 on November 04, 2014,

Probably not.  The Entec open requires the PC to format and time the data stream for transmission and the configuration utility cannot do that. 

Title: Re: Programming LE curves
Post by: jnealand on November 05, 2014,

Personally after 7 seven years of doing this I have never used dimming curves.  While I can see the potential for use, I do not think the audience will ever notice whether you use them or not.  Most of us blink lights to fast for anyone to really notice any dimming mismatch.  That's just my opinion, you may have another.  I have way to many things to do for my show than to spend time on dimming curves, but to each their own.

Title: Re: Programming LE curves
Post by: duane.mosley on November 05, 2014,

You are not allowed to view links. Register or Login

Personally after 7 seven years of doing this I have never used dimming curves.  While I can see the potential for use, I do not think the audience will ever notice whether you use them or not.  Most of us blink lights to fast for anyone to really notice any dimming mismatch.  That's just my opinion, you may have another.  I have way to many things to do for my show than to spend time on dimming curves, but to each their own.

same here