Hardware > Lynx Wireless DMX

Obsolete parts that are no longer availible at Mouser

(1/2) > >>

Al:
the Wiki shopping list for the Wireless(TX/RX)Ver 2
has 2 parts that are Obsolete.

579-MRF24J40MB-I/RM   - Zigbee / 802.15.4 Modules 2.4GHz, 802.15.4 Xcvr w/int PA
511-ST485BN                - Buffers & Line Drivers Hi-Spd Lo Pwr Trans

is there any one that has a updated shopping list?


al

RJ:
Al,

The transceiver has replacements available I think one of the coop guys will have the number of the one they are using. The issue is the rf module. I am not finding any of them. The alternate number they show is fine but no one carries them.

RJ

Al:
579-MRF24J40MA-I/RM
this shows as a similar part, would it work?

vairmoose:
The original transceiver (version 1)  used the MA chip {in both the RX receiver and TX/RX transceiver).    In the transceiver version 2, RJ jumped to the MB chip in the transceiver because it has a stronger broadcast signal and did not require an external antenna.   

Real Components  indicates they have a bunch (over 3000 in stock)   but price unknown.    You'd need to call them.    You are not allowed to view links. Register or Login

Larry

tbone321:
If this is the case then I would suggest that the coop managers decide if this would be a good time for a quick wireless coop.  I would also suggest that one of the options be just the MB chip for those that have boards alone. 

Navigation

[0] Message Index

[#] Next page