DiyLightAnimation

Hardware => Lynx Aether => Topic started by: batdive on November 16, 2010,

Title: Wireless with Aether, white on briefly wireless link loss
Post by: batdive on November 16, 2010,

RJ, I have noticed during some testing that when the Aethers loss signal for even a split second during test sequences, they revert to the white channel.  So your sequence might have a couple flashes of white depending on how good the wireless link is and the angle/location of Aether to the TX.

Is there a way to have the Aether keep the last received color until it is updated instead of the flash of white?

IE do 5 seconds of blue and briefly loses signal at second 2 ( you get bright flash of white) then back to blue.


Thanks not to add more to your holiday season just a quick question/suggestion.


-JS

Title: Re: Wireles with Aether, white on briefly wireless link lossRJ
Post by: RJ on November 16, 2010,

What your asking is what it does. The issue is not with total signal loss but corruption when the signal is weak. So it thinks it is getting a good signal. I include error correction but it can not always catch this. If the signal is good it should not be an issue.

RJ