DiyLightAnimation

Hardware => Lynx Wireless DMX => Topic started by: lightguy on December 16, 2011,

Title: Mouser part number for socket on Lynx Express to take the DMX Wireless RX card
Post by: lightguy on December 16, 2011,
Hi, I need to order 4 Molex sockets from Mouser to go on two of my Express boards to plug the piggy back wireless DMX RX card onto, but the picture on the Mouser site using the link in the BOM looks wrong?
(I got the cards from another member who had already soldered the sockets that came in the coop kits onto his Expresses.)

Can anyone confirm the correct part number please, or does anyone have any spare they dont need?

Thanks guys
Title: Re: Mouser part number for socket on Lynx Express to take the DMX Wireless RX card
Post by: pk on December 16, 2011,
Mouser p/n = 517-974-01-04-RK .  This is the connector that solders onto the express.  You need 2 per express.

 
Title: Re: Mouser part number for socket on Lynx Express to take the DMX Wireless RX card
Post by: tmcteer on December 16, 2011,
The picture on the Mouser catalog page is for a dual row part. Looking at the data sheet the part number is for a single row 4 pin tin plated contacts.