DiyLightAnimation

Hardware => Lynx Wireless DMX => Topic started by: RJ on April 21, 2009,

Title: Cases for Wireless
Post by: RJ on April 21, 2009,

Please vote if you are on the coop for any wireless. Even if you don't care put that you would not want any.

RJ

Title: Re: Cases for Wireless
Post by: WWNF911 on April 21, 2009,

I'm confused. I went ahead and bought the broadband cases. (same size as I used for the Freestyle) I thought they were gonna be large enough to add the wireless and still fit? Is this not the case?

Title: Re: Cases for Wireless
Post by: grossg on April 21, 2009,

Lots of puns tonight...it is the CASE  ;D  RJ was saying that they would be custom cut.  There needs to be room for the antenna to exit etc.

Title: Re: Cases for Wireless
Post by: RJ on April 21, 2009,

Sorry for the confusion! this is not the Express cases I am talking about the EX/RX fits in the Express case.

This is the cases for the wireless TX and the Standalone Wireless RX units. The fit two different enclosures and need the holes in the end for the antenna, power and cat 5 data.

RJ

Title: Re: Cases for Wireless
Post by: Ron on April 21, 2009,

I'd definitely pay a little extra to get the holes precut for me.  Any chance we could get some regular dongle cases done like this too?  I still have some naked dongles looking for a home.

Ron

Title: Re: Cases for Wireless
Post by: RJ on April 21, 2009,

You are not allowed to view links. Register or Login

I'd definitely pay a little extra to get the holes precut for me.  Any chance we could get some regular dongle cases done like this too?  I still have some naked dongles looking for a home.

Ron

If the interest is there to fill a coop with enough to meet the minmum to get a price that is reasonable then I would do the dongle also.

RJ

Title: Re: Cases for Wireless
Post by: WWNF911 on April 21, 2009,

Ohhh Ohhhh!!!!

My smiley is hopping up and down with its hand raised.

(my naked dongles will be sooo happy!)

Title: Re: Cases for Wireless
Post by: REM on April 21, 2009,

I'm certainly down with that across the board.  I also already have my dongle cases which I haven't modded yet but I'd actually pay for new ones custom milled.  In case I didn't post this earlier, I've attached the quote Polycase gave me for the Dongle mods...

Ron

Title: Re: Cases for Wireless
Post by: Blackbeard on April 22, 2009,

If the prices will be similar to the ones in the dongle PDF, and based on the number of PCBs ordered, I might consider this. (I know, I know, there is a poll going on and this isn't a vote in the poll).

A suggestion for all this if it goes through as a part of the COOP: Can enough packets of screws for these be purchased along with the cases and 4 screws added to each case order? I had a heck of a time finding those little screws and I had to improvise in the end when assembling my dongle case.

I'll vote later after seeing a few more comments and explanation of the pricing (I'm always confused and not sure what the table is really saying yet), but this is sorta a yes indicator.

steve

Title: Re: Cases for Wireless
Post by: grossg on April 22, 2009,

I vote yes for the custom cut dongle cases as well!
Best regards,
Glen

Title: Re: Cases for Wireless
Post by: wbuehler on April 28, 2009,

I missed the voting but I would like cases

Bill

Title: Re: Cases for Wireless
Post by: Brad on May 01, 2009,

I too missed the vote. I would like custom cases also.

Brad

Title: Re: Cases for Wireless
Post by: RJ on May 01, 2009,

Well the coop is underway so get in the game!

RJ