DiyLightAnimation
Software => Light Show Pro => Topic started by: rrowan on May 14, 2009,
-
Hi Guys,
Unless I missed it.
We need to be able to set the intensity of the channel/track by a number
ie: 0 - 255
The intensity window does not show any info just dash marks.
Thanks
Rick (hopefully not a pain in the ... ) R. :D
-
Hi Guys,
Unless I missed it.
We need to be able to set the intensity of the channel/track by a number
ie: 0 - 255
The intensity window does not show any info just dash marks.
Thanks
Rick (hopefully not a pain in the ... ) R. :D
Hi Rick,
noted: this is a separate feature as what wbuehler is requesting.
If I understand you, you want to see numbers in the intensity track bar or include a text box to enter a discrete value between 0-255? right?
If so, is the intention to send a discrete value to a dmx device? or simply use a numeric value to determine intensity?
the reason I ask is because of the way that LSP works with intensity is on a 0-100% range not 0-255, although it would be simple to do (intensity*2.55) or (0-255*.392) programmatically to get a quick conversion, rounding may become an issue if you are looking to send a discrete value.
LSP has constructs to facilitate the precise value being sent, I just want to be sure to understand your objective before developing a solution.
So is it a discrete value you wish to send or a discrete intensity(with the posibility of rounding)
thanks,
David
-
Hi David
I split out this tread in hopes its easier for you.
Discrete value - maybe a second menu item with a text box to enter the value needed. Then the Intensity slider can stay as is for percentage.
1 - To set a channel (lights) to a known value
2 - Its a way we can set Most Lynx Controllers (the Express is the exception). Using the first two channels to program the start channel for a controller that is in program mode (boy that sounds confusing) example: Say a MR-16 Controller needs to be set to start channel 80. Channel 1(track #1) in LSP would be effect ON and the intensity would be 80, or Start address needs to be set to 400 then track #1 is ON with intensity set to 255 and track #2 is ON with intensity set to 145
Thanks
Rick R.
-
Hi Rick,
that all makes perfect sense.
Would it make sense to provide a configuration panel (dialog screen) which will send the desired config values to the controller in a simplified manner?