DiyLightAnimation
Hardware => Lynx Smart String => Topic started by: sittinguphigh on October 17, 2012,
-
I don't know what kind of chip is in the smart strings.
But I wonder if this RGB string would work?
For my application these would work great.
http://www.aliexpress.com/store/product/led-pixel-module-WS2801-DC12V-input-IP68-100pcs-a-string-IP68/701799_529753561.html
Mort
-
Those strings are Not Compatible with the Smart String Controller. The chart in the wiki lists all of the ones that will work. http://www.diylightanimation.com/wiki/index.php?title=Equipment#Nodes.28Lights.29_Info_.26_Order_Chart
Rick R.
-
Key seems to be TM1804IC chip, 12 Volt, and 3 Wire which at least cursory search seems only Ray has that specific combo setup for us.
-
They won't work. You would need something like a sandevices e682 to control these or a dmx decoder that ray also sells.
-
Ray does have a new TM1804 model that I've not noticed before:
http://www.aliexpress.com/store/product/26mm-diameter-TM1804-LED-pixel-module-3pcs-5050-RGB-SMD-LED-DC12V-input-IP68/701799_597351990.html
Look just like the D-Light Firefli modules but no Cutting!
-
I wonder if it's the wrong picture, they have 4 wires going to them... remember, even if you find something that meets the requirements of a smart string, the colors could still be off. If you proceed, make sure to buy a small enough sample that you wont be out (financially) in case it doesn't work for you.
-
Yes they have four wires. I think I will message Ray. See if he can find these the way DLA wants them.
This could work for alot of things.
-
There is also a speed setting. If you want to try them, start with a small sample to test before placing a big order.