DiyLightAnimation

Fun => The Porch => Topic started by: zwiller on February 07, 2014,

Title: Wow that's density!
Post by: zwiller on February 07, 2014,

Just took a gander over at Rays and saw these: http://www.aliexpress.com/store/product/144leds-m-WS2812B-5050-rgb-led-with-WS2811-IC-built-in-led-pixel-strip-DC5V-4m/701799_1192519314.html (http://www.aliexpress.com/store/product/144leds-m-WS2812B-5050-rgb-led-with-WS2811-IC-built-in-led-pixel-strip-DC5V-4m/701799_1192519314.html)

I have NO intention on using them...   

Title: Re: Wow that's density!
Post by: Dennis Cherry on February 07, 2014,

You are not allowed to view links. Register or Login

Just took a gander over at Rays and saw these: http://www.aliexpress.com/store/product/144leds-m-WS2812B-5050-rgb-led-with-WS2811-IC-built-in-led-pixel-strip-DC5V-4m/701799_1192519314.html (http://www.aliexpress.com/store/product/144leds-m-WS2812B-5050-rgb-led-with-WS2811-IC-built-in-led-pixel-strip-DC5V-4m/701799_1192519314.html)

I have NO intention on using them...

Selling you the bare strips only, absolutely no protection from the enviornment. (IP-33)

Title: Re: Wow that's density!
Post by: arw01 on February 07, 2014,

Ray's silicon sleeves will fix you right up!  Power injection every meter maybe with 5v and that many?  35 amp supply for 4 meters, that sounds cheap!

Would likely be fine in a pex tube on the house too, make great wall washers if you could protect them.

Someone mentioned clear HDPE pipe, but I have not sourced that yet.

Alan

Title: Re: Wow that's density!
Post by: kiplorenzo on February 07, 2014,

there is this string that is IP68 and 100% controllable pixels:
http://www.aliexpress.com/item/5m-DC12V-INK1003-led-pixel-srip-IP68-60pcs-1002led-5050-RGB-with-bulit-in-INK1003-IC/1546163504.html

Title: Re: Wow that's density!
Post by: drlucas on February 09, 2014,

You are not allowed to view links. Register or Login

there is this string that is IP68 and 100% controllable pixels:
http://www.aliexpress.com/item/5m-DC12V-INK1003-led-pixel-srip-IP68-60pcs-1002led-5050-RGB-with-bulit-in-INK1003-IC/1546163504.html

And they are 12v

Anyone have these guys and test with a Zeus yet?

Title: Re: Wow that's density!
Post by: arw01 on February 09, 2014,

I've been following an outside thread where a fellow was having issues with them and a San Devices E682.  He was awaiting Jim of San Devices to look into it with a possible firmware change to support them.

I thought Sean ordered a sample set to play with, but have not seen anything else on them.

Alan