DiyLightAnimation

Hardware => Lynx USB DMX Dongle => Topic started by: rrowan on March 01, 2012,

Title: New Program - Start Channel
Post by: rrowan on March 01, 2012,

Hi Folks,

I just posted a new program to be able to set the start address for the DMX Controllers (SSR4-DMX, MR16, Freestyle). It can be used if the Lynx USB Dongle is loaded with either DMX or Pixelnet firmware.

Before you get all excited the EtherDongle is not supported YET. As soon as I have a working version for the E1.31 working I will update the program to allow the use of either dongle.

The program can be found here http://www.diylightanimation.com/wiki/index.php?title=Software#Windows_Programs

Just follow the directions in the assembly manual. I have tried both methods to set the start channel and it worked for me.

Of course I made no claim it will work for everyone  <fp.  ;D

Rick R.

Title: Re: New Program - Start Channel
Post by: Rogelio on April 28, 2012,

thanks for updating the program for the EtherDongle.  Do you think light curves may be added soon?
Roy

Title: Re: New Program - Start Channel
Post by: rrowan on April 28, 2012,

Sorry no curves the Start Channel, the program is NOT compatible with the LE

Rick R.