DiyLightAnimation

Hardware => Lynx Express => Topic started by: devoidelk on November 10, 2012,

Title: channel not responding (SOLVED)
Post by: devoidelk on November 10, 2012,

Channel 5 works when i test on the LE but does not respond to any commands from the dongle.

What could be the problem?

Title: Re: channel not responding
Post by: Jeffl on November 10, 2012,

Is the opto in backwards?

Title: Re: channel not responding
Post by: devoidelk on November 10, 2012,

there is not an opto in the LE. But i checked all the components and there is not any solder bridges.

Title: Re: channel not responding
Post by: sjb on November 10, 2012,

What software are you using? Do you have the channel disabled in the software for output?

Steve

Title: Re: channel not responding
Post by: devoidelk on November 10, 2012,

vixen and ive gone through all channels and there all enabled

Title: Re: channel not responding
Post by: hicksjo on November 10, 2012,

You are not allowed to view links. Register or Login

there is not an opto in the LE. But i checked all the components and there is not any solder bridges.

No opto?

That seems like a problem.

Title: Re: channel not responding
Post by: Jeffl on November 10, 2012,

You are not allowed to view links. Register or Login

there is not an opto in the LE. But i checked all the components and there is not any solder bridges.

There are 16 of them from what I see in the manual

Title: Re: channel not responding
Post by: devoidelk on November 10, 2012,

solved it was the vixen profile causing the fit... For some reason it acted as if the channel didnt exist even though i had 16 shown.... redid my profile and works fine.... ty for all the ideas

Title: Re: channel not responding (SOLVED)
Post by: devoidelk on November 10, 2012,

You are not allowed to view links. Register or Login

You are not allowed to view links. Register or Login

there is not an opto in the LE. But i checked all the components and there is not any solder bridges.

There are 16 of them from what I see in the manual

My bad i was thinking optocouplers not optio isolaters