DiyLightAnimation

Hardware => Lynx Express => Topic started by: joshuashu on December 01, 2012,

Title: No signal.
Post by: joshuashu on December 01, 2012,

I have an le that is not getting signal. It comes off from another board that is wireless.  I have tried new cables and jumpers etc with no luck?

Title: Re: No signal.
Post by: jnealand on December 01, 2012,

On the LE with wireless there is only one DMX out jack that works, I forget which one now.

Title: Re: No signal.
Post by: bcstuff on December 01, 2012,

On a LE with wireless enabled, only DMX2 will output because you bypass the 485 chip on DMX1.

Title: Re: No signal.
Post by: bassmants on December 01, 2012,

Wow, good info.  I had a similar issue...