DiyLightAnimation

Hardware => Lynx EtherDongle => Topic started by: Orion on March 15, 2013,

Title: Can't find case template
Post by: Orion on March 15, 2013,

does anyone have a case template for the etherdongle?  I can't seem to find on on the wiki.  Thank you

Title: Re: Can't find case template
Post by: rdebolt on March 16, 2013,

I cannot remember ever seeing one. If my memory serves me correctly the cases were included in the coop and they were already cut.

Title: Re: Can't find case template
Post by: smeighan on March 16, 2013,

my two etherdongles came with cases already cut.

Title: Re: Can't find case template
Post by: rrowan on March 16, 2013,

I just drew this up.

Can anybody check my work?

Rick R.

I know the drawing is not to scale but the dimensions should be

Title: Re: Can't find case template
Post by: rrowan on March 16, 2013,

I redid the pdf to scale

Hoping someone can double check my AutoCAD drawing measurements

Rick R.

I forgot to mention the purple lines are the posts for the screws

Title: Re: Can't find case template
Post by: rrowan on March 16, 2013,

Ugh sorry I made a mistake in the dimension units. I drew it with some at 1/32 but only shown it at 1/16. I have update the drawing with more text and of course the correct dimension units.

Rick R.

P.S. I will remove the older files

Title: Re: Can't find case template
Post by: rrowan on March 16, 2013,

Can someone confirm my measurements so I can add the template to the wiki?

Thanks

Rick R.

Title: Re: Can't find case template
Post by: Orion on March 16, 2013,

Thank you for doing this.  So how is everyone cutting the square holes?

Title: Re: Can't find case template
Post by: JerryPlak on March 16, 2013,

Yes Rick R. Thank you for doing this I going to try this tomorrow :-)

Title: Can't find case template
Post by: rm357 on March 17, 2013,

You are not allowed to view links. Register or Login

Thank you for doing this.  So how is everyone cutting the square holes?

EtD case I got with the coop.
Conductor mods...
Not very neatly I'm afraid...
:-(

Good thing is no one else should be able to see it...

Title: Re: Can't find case template
Post by: Voltorb on March 17, 2013,

Is there a .STL file available so I can print a case with a 3D printer?

Title: Re: Can't find case template
Post by: rrowan on March 17, 2013,

You are not allowed to view links. Register or Login

Is there a .STL file available so I can print a case with a 3D printer?

How are you going to make a case with only two sides and without the top or bottom or interior?

The case measurements are on the polycase website

Rick R.

Title: Re: Can't find case template
Post by: rmp2917 on March 17, 2013,

Here are the drawings that were used for the coop.