DiyLightAnimation

Store => Finished COOPS => Topic started by: mmccrae on June 11, 2013,

Title: Lynx SSR4, the SSR4 with DMX option***All Packages SHIPPED***
Post by: mmccrae on June 11, 2013,

This Coop will be for PCB & parts for the Lynx SSR4, the SSR4 with DMX option and the Lynx DMX Splitter.

***CLOSED FOR ORDERS & PAYMENTS***
PICs will not be programmed in this coop
No kits will include the cases as it is just as cost effective for the users to order them.

The manuals can be found in the wiki: http://diylightanimation.com/wiki/index.php?title=Equipment (http://diylightanimation.com/wiki/index.php?title=Equipment) .
By joining this Coop you also agree that the Coop manager, DLA (as a board to also include all administrators, moderators, and members) shall not be held for any liability. 
You are joining this Coop at your own risk.

As with any Coop this Coop is subject to the forum rules.  These rules can be reviewed using the following link.
Forum Coop rules:
http://diylightanimation.com/index.php?topic=111.0 (http://diylightanimation.com/index.php?topic=111.0)

The Co-Op will be limited to 150 total kits.  This Coop will close on June 30, 2013 at 9:00 PM Central Daylight Time or when 150 total kits have been reached.  Once the Coop is closed I will send each member a PM with the details of their order and what payment is due.  Full payment is expected when the coop is closed since orders cannot be made until all members have paid.  Please get your PayPal payments in as soon as you get the Coop invoice PM. Please insure your PayPal address info is up to date. 

Here are the pricing details at initial ordering amounts.   
As always higher numbers equal reduced pricing and lower numbers equals increased pricing. 

Not sure which SSR4 kit you need see this post: http://diylightanimation.com/index.php?topic=2711.0 (http://diylightanimation.com/index.php?topic=2711.0)

Kit 1 - SSR4 Kit (Includes PCB and parts)
Qty 50 $16.89

Kit 2 - SSR4 with DMX Option (Includes PCB and parts)
Qty 50 - $29.89

Kit 3 - Lynx DMX Splitter Kit Includes PCB and parts)
Qty 50 - $22.54
No PCB only kits will be available in this coop



*** NOTE ***  Prices above DO NOT include paypal fees which will be added to your final payment not including the shipping costs!!!
Shipping will be by US Postal Service Priority Mail Flat Rate boxes and shipping will be a separate paypal item after items have been paid for, received, sorted and boxed ready for shipment.  I will send out these requests when they are ready to be shipped.

We cannot be held responsible for you packaged once accepted at the post office and we have a receipt of shipment if it is not insured.

Post with the quantity you wish in this thread.  Please do not post questions or your thoughts in the coop thread. Start a new thread in the correct area for these. Coop threads are strictly for people requesting orders. If you later wish to change your quantity please post again clearly stating that this is an update to a previous order and how many you wish it to be now.

If you have any questions please post a new thread to help keep the coop thread clean.

Thanks for participating in this COOP.

Mike

Title: Re: Lynx SSR4, the SSR4 with DMX option and the Lynx DMX Splitter Coop
Post by: wjgiles50 on June 11, 2013,

I would like 4 of kit#2 please

Title: Re: Lynx SSR4, the SSR4 with DMX option and the Lynx DMX Splitter Coop
Post by: mmccrae on June 11, 2013,

Member Name	Kit 1 Ordered	Kit 2 Ordered	Kit 3 Ordered	Paid	International	Insurance	Shipped
wjgiles50 (http://diylightanimation.com/index.php?action=profile;u=543)	0	4	0	x			x
	0	x	x
urthegman (http://diylightanimation.com/index.php?action=profile;u=1567)	0	4	0	x			x
edwinpeek (http://diylightanimation.com/index.php?action=profile;u=3415)	0	3	2	x			x
Voltorb (http://diylightanimation.com/index.php?action=profile;u=3729)	0	6	0	x			x
rayster (http://diylightanimation.com/index.php?action=profile;u=2013)	0	3	0	x			x
elmo2resc (http://diylightanimation.com/index.php?action=profile;u=3315)	0	4	1	x			x
dmaccole (http://diylightanimation.com/index.php?action=profile;u=17)	0	0	2	x			x
ronniek (http://diylightanimation.com/index.php?action=profile;u=1089)	0	3	1	x			x
etkfixr (http://diylightanimation.com/index.php?action=profile;u=4576)	2	2	0	x			x
Kwajtony (http://diylightanimation.com/index.php?action=profile;u=1064)	4	2	1	x			x
pwalstead (http://diylightanimation.com/index.php?action=profile;u=2206)	0	0	5	x			x
holland lights (http://diylightanimation.com/index.php?action=profile;u=2039)	0	2	0	x			x
Unibits (http://diylightanimation.com/index.php?action=profile;u=1052)	0	0	2	x			x
MazdaFan (http://diylightanimation.com/index.php?action=profile;u=3860)	0	2	1	x			x
nick (http://diylightanimation.com/index.php?action=profile;u=1113)	0	2	1	x			x
lortiz (http://diylightanimation.com/index.php?action=profile;u=686)	0	0	1	x			x
bakerlights (http://diylightanimation.com/index.php?action=profile;u=4540)	0	0	1	x			x
doubleeaz (http://diylightanimation.com/index.php?action=profile;u=2477)	0	2	0	x			x
drlucas (http://diylightanimation.com/index.php?action=profile;u=4236)	0	3	0	x	X
animal (http://diylightanimation.com/index.php?action=profile;u=2820)	0	6	0	x			x
joshuashu (http://diylightanimation.com/index.php?action=profile;u=1010)	0	0	1				x
WWNF911 (http://diylightanimation.com/index.php?action=profile;u=34)	0	0	1	x			x
	0	x	x
testylefty (http://diylightanimation.com/index.php?action=profile;u=1506)	0	3	0	x			x
Rich Renn (http://diylightanimation.com/index.php?action=profile;u=4163)	0	0	1	x			x
gforman (http://diylightanimation.com/index.php?action=profile;u=1849)	0	2	0	x			x
TomJ (http://diylightanimation.com/index.php?action=profile;u=1709)	0	2	0	x			x
Creativehues (http://diylightanimation.com/index.php?action=profile;u=4533)	0	4	0	x			x
zwiller (http://diylightanimation.com/index.php?action=profile;u=1134)	0	0	2	x			x
Total	6	59	23

Title: Re: Lynx SSR4, the SSR4 with DMX option and the Lynx DMX Splitter Coop
Post by: AaronS on June 11, 2013,

4 of kit #2 please.

Thanks
AaronS

Title: Re: Lynx SSR4, the SSR4 with DMX option and the Lynx DMX Splitter Coop
Post by: urthegman on June 11, 2013,

4 of Kit #2 for me as well. Thanks.

Title: Re: Lynx SSR4, the SSR4 with DMX option and the Lynx DMX Splitter Coop
Post by: edwinpeek on June 11, 2013,

3 of kit #2
2 of kit #3

Title: Re: Lynx SSR4, the SSR4 with DMX option and the Lynx DMX Splitter Coop
Post by: Voltorb on June 12, 2013,

6 of kit #2 please.

Thank you!

Title: Re: Lynx SSR4, the SSR4 with DMX option and the Lynx DMX Splitter Coop
Post by: rayster on June 12, 2013,

3 2's please!!!

Ray

Title: Re: Lynx SSR4, the SSR4 with DMX option and the Lynx DMX Splitter Coop
Post by: elmo2resc on June 12, 2013,

4 of Kit 2
1 of Kit 3

Thanks, Jerome

Title: Re: Lynx SSR4, the SSR4 with DMX option and the Lynx DMX Splitter Coop
Post by: dmaccole on June 12, 2013,

Kit No. 3 -- Quantity 2

Thanks for running the coop.

\dmc

Title: Re: Lynx SSR4, the SSR4 with DMX option and the Lynx DMX Splitter Coop
Post by: ronniek on June 12, 2013,

3 of kit #2
1 of kit #3

Thanks,
Ronniek

Title: Re: Lynx SSR4, the SSR4 with DMX option and the Lynx DMX Splitter Coop
Post by: etkfixr on June 12, 2013,

2 of kit one and 2 of kit two please.

Thanks!

Title: Re: Lynx SSR4, the SSR4 with DMX option and the Lynx DMX Splitter Coop
Post by: Kwajtony on June 14, 2013,

Thanks for doing this coop

4 Kit 1
2 Kit 2

Please.

Title: Re: Lynx SSR4, the SSR4 with DMX option and the Lynx DMX Splitter Coop
Post by: pwalstead on June 14, 2013,

I would like Qty.5 of kit 3 please.

Title: Re: Lynx SSR4, the SSR4 with DMX option and the Lynx DMX Splitter Coop
Post by: holland lights on June 15, 2013,

2-Kit 2 - SSR4 with DMX Option (Includes PCB and parts)

Title: Re: Lynx SSR4, the SSR4 with DMX option and the Lynx DMX Splitter Coop
Post by: Unibits on June 16, 2013,

Kit 3  - quantity 2

Thanks for running this coop

Title: Re: Lynx SSR4, the SSR4 with DMX option and the Lynx DMX Splitter Coop
Post by: MazdaFan on June 16, 2013,

2 x Kit 2
1 x Kit 3

Please.

Thanks for running this co-op.

Jamie

Title: Re: Lynx SSR4, the SSR4 with DMX option and the Lynx DMX Splitter Coop
Post by: nick on June 17, 2013,

2 x Kit 2
1 x Kit 3

Thanks.

Title: Re: Lynx SSR4, the SSR4 with DMX option and the Lynx DMX Splitter Coop
Post by: lortiz on June 18, 2013,

Hi,

Please add the following for me:

1 x Kit3

Thanks for doing this COOP.

Leo

Title: Re: Lynx SSR4, the SSR4 with DMX option and the Lynx DMX Splitter Coop
Post by: bakerlights on June 18, 2013,

1 of Kit #3

Thank you for running the COOP.

Title: Re: Lynx SSR4, the SSR4 with DMX option and the Lynx DMX Splitter Coop
Post by: doubleeaz on June 18, 2013,

I would like two of kit #2.
Thanks.

Title: Re: Lynx SSR4, the SSR4 with DMX option and the Lynx DMX Splitter Coop
Post by: drlucas on June 18, 2013,

Kit #2 - quantity 3

Title: Re: Lynx SSR4, the SSR4 with DMX option and the Lynx DMX Splitter Coop
Post by: animal on June 19, 2013,

 I'll take  6- of kit 2

                    Thanks,
                         animal

Title: Lynx SSR4, the SSR4 with DMX option and the Lynx DMX Splitter Coop
Post by: joshuashu on June 19, 2013,

I would like 1 of kit 3

Title: Re: Lynx SSR4, the SSR4 with DMX option and the Lynx DMX Splitter Coop
Post by: WWNF911 on June 20, 2013,

I would like 1 of kit 3.

Thanks

Leon

Title: Re: Lynx SSR4, the SSR4 with DMX option and the Lynx DMX Splitter Coop
Post by: pete peters on June 21, 2013,

Put me in for  FOUR (4)  Kit #2

Thanks

Pete Peters

Title: Re: Lynx SSR4, the SSR4 with DMX option and the Lynx DMX Splitter Coop
Post by: Kwajtony on June 22, 2013,

Please add 1 Kit 3 to my order.  Thank you.

Title: Re: Lynx SSR4, the SSR4 with DMX option and the Lynx DMX Splitter Coop
Post by: pete peters on June 22, 2013,

Please ADD  TWO (2) Kit #3 to my order.

Thanks Much

Pete Peters

Title: Re: Lynx SSR4, the SSR4 with DMX option and the Lynx DMX Splitter Coop
Post by: testylefty on June 24, 2013,

I would like three (3) of kit #2 please.  Thanks.

Colin

Title: Re: Lynx SSR4, the SSR4 with DMX option and the Lynx DMX Splitter Coop
Post by: Rich Renn on June 27, 2013,

I would like 1 kit #3 please


Thanks
Richard

Title: Re: Lynx SSR4, the SSR4 with DMX option and the Lynx DMX Splitter Coop
Post by: gforman on June 28, 2013,

please put gforman down for 2 of Kit 2

thanks for running this COOP

Glen

Title: Re: Lynx SSR4, the SSR4 with DMX option and the Lynx DMX Splitter Coop
Post by: TomJ on June 29, 2013,

Mike,

I would like to order two (2) kit #2 please.

Thanks for running the coop!
Tom

Title: Lynx SSR4, the SSR4 with DMX option and the Lynx DMX Splitter Coop
Post by: Creativehues on June 30, 2013,

(4) kit #2 for me please


- John

Title: Re: Lynx SSR4, the SSR4 with DMX option***CLOSED FOR ORDERS***
Post by: mmccrae on July 01, 2013,

Payment PM's will go out on Wed 7/3/2013 Please verify all Quantities listed in post, due to 4th of July Holiday, I will extend payment due date, I ask that all payments to be in by 7/12/2013 so parts and PCB's can be ordered.

Thanks
Mike

Title: Re: Lynx SSR4, the SSR4 with DMX option***CLOSED FOR ORDERS***
Post by: mmccrae on July 02, 2013,

All Payment PM's have all been sent out please check the Quantities listed.

Payments include all fees and shipping charges.

Please note the faster you pay, the faster I can get PCB's and Parts ordered, due to 4th of July holiday payment window will be open until 7/12/2013 6:00 pm CDT


Thanks

Mike

Title: Re: Lynx SSR4, the SSR4 with DMX option***CLOSED FOR ORDERS***
Post by: holland lights on July 02, 2013,

Payment has been sent...

Title: Re: Lynx SSR4, the SSR4 with DMX option***CLOSED FOR ORDERS***
Post by: MazdaFan on July 03, 2013,

Payment sent.  Thanks again.

Jamie

Title: Re: Lynx SSR4, the SSR4 with DMX option***CLOSED FOR ORDERS***
Post by: bakerlights on July 03, 2013,

Payment Sent, Thank you for running the Coop.

Title: Re: Lynx SSR4, the SSR4 with DMX option***CLOSED FOR ORDERS***
Post by: etkfixr on July 03, 2013,

Sent!

Title: Re: Lynx SSR4, the SSR4 with DMX option***CLOSED FOR ORDERS***
Post by: Rich Renn on July 06, 2013,

Payment sent Mike thanks for running the coop

Title: Re: Lynx SSR4, the SSR4 with DMX option***CLOSED FOR ORDERS***
Post by: WWNF911 on July 08, 2013,

Payment sent. Thanks

Leon

Title: Re: Lynx SSR4, the SSR4 with DMX option***CLOSED FOR ORDERS***
Post by: ronniek on July 09, 2013,

Hey Mike,

Could you check your records, I sent payment on July 2 but you do not have me as paid yet.

Thanks,
Ronniek

Title: Re: Lynx SSR4, the SSR4 with DMX option***CLOSED FOR ORDERS***
Post by: ronniek on July 10, 2013,

Sorry for the delay due to my typo, I have corrected it with paypal and you should have my payment now. Thanks for all the work you do, I am really sorry for my mistake and any extra work I have caused you.

Ronnie Kelley

Title: Re: Lynx SSR4, the SSR4 with DMX option***CLOSED FOR ORDERS***
Post by: mmccrae on July 10, 2013,

You are not allowed to view links. Register or Login

Sorry for the delay due to my typo, I have corrected it with paypal and you should have my payment now. Thanks for all the work you do, I am really sorry for my mistake and any extra work I have caused you.

Ronnie Kelley

No big deal we have it all straight now.


Mike

Title: Re: Lynx SSR4, the SSR4 with DMX option***CLOSED FOR ORDERS & PAYMENTS***
Post by: mmccrae on July 13, 2013,

Payment window is now Closed

Parts to be ordered on monday 7/15/2013


Mike

Title: Re: Lynx SSR4, the SSR4 with DMX option***CLOSED FOR ORDERS & PAYMENTS***
Post by: MazdaFan on July 13, 2013,

You are not allowed to view links. Register or Login

Payment window is now Closed

Parts to be ordered on monday 7/15/2015


Mike

Good Lord... If we have to wait two years for you to order parts I'm going to have to start replanning my show.   <la..

Title: Re: Lynx SSR4, the SSR4 with DMX option***CLOSED FOR ORDERS & PAYMENTS***
Post by: mmccrae on July 15, 2013,

All Parts ordered, today.

One item backordered until 7/29/2013, no problem there, PCB's will take time to get in.


Mike

Title: So you want to be a coop manager?
Post by: mmccrae on July 16, 2013,

Part from Mouser arrived today... YEAH one of the nice thing about living in TX Mouser deliveries are next day  ;D

Now all I have to do is turn this pile of parts into nice little kits for you-all.

Note this is a very small coop only 88 kits.. still a big pile


Mike

Title: Re: Lynx SSR4, the SSR4 with DMX option***CLOSED FOR ORDERS & PAYMENTS***
Post by: mmccrae on July 21, 2013,

Update this week:

Phase I of part sorting complete all static sensitive parts have been sorted and repackaged.
PCB's have been ordered.


Mike
Spring,TX

Title: Re: Lynx SSR4, the SSR4 with DMX option***CLOSED FOR ORDERS & PAYMENTS***
Post by: mmccrae on August 02, 2013,

Update:

All parts sorted waiting on PCB's to ship

Title: Re: Lynx SSR4, the SSR4 with DMX option***CLOSED FOR ORDERS & PAYMENTS***
Post by: mmccrae on August 06, 2013,

UPDATE:

Notice today that PCB's have shipped out

Mike,
Spring,TX

Title: Re: Lynx SSR4, the SSR4 with DMX option***CLOSED FOR ORDERS & PAYMENTS***
Post by: mmccrae on August 09, 2013,

PCB's arrived today.

Everything should be shipped out first part of next week

Mike,
Spring, TX

Title: Re: Lynx SSR4, the SSR4 with DMX option***CLOSED FOR ORDERS & PAYMENTS***
Post by: mmccrae on August 15, 2013,

All packages shipping out tomorrow 8/16/2013


Mike,
Spring TX

Title: Re: Lynx SSR4, the SSR4 with DMX option***All Packages SHIPPED***
Post by: RJ on August 16, 2013,

Thank you so much for do this coop for everyone!

RJ

Title: Re: Lynx SSR4, the SSR4 with DMX option***All Packages SHIPPED***
Post by: Rich Renn on August 16, 2013,

          Mike  thanks for the update and running the coop.

Title: Re: Lynx SSR4, the SSR4 with DMX option***All Packages SHIPPED***
Post by: Rich Renn on August 19, 2013,

Received my order today thanks


Richard

Title: Re: Lynx SSR4, the SSR4 with DMX option***All Packages SHIPPED***
Post by: drlucas on August 19, 2013,

I'm so jealous of you guys that got your kits already. I'm still waiting for my SSCs to be delivered. I think once the USPS guys hit the Canadian border the agents have to load the gear onto rafts and wait for the winds to blow from the south before the shipping container can make it's way across Lake Ontario. From there the mules get loaded and make the trek across the rugged terrain in the snow. I would be faster to wait for Santa to make the trip on December 24th, however given this is my first year in this hobby I'd be out of luck for a 2013 show.

My silliness aside - thank to all who run these fantastic coops and thank you for making this available to us international folks. I just need to wait the extra two weeks for the goods to get here. With the magjack I ordered once it was here in 36hrs from the US. I guess every time it's different getting the delivery coordinated between Canada Post and USPS.

Title: Re: Lynx SSR4, the SSR4 with DMX option***All Packages SHIPPED***
Post by: Steve Gase on August 19, 2013,

You are not allowed to view links. Register or Login

I'm so jealous of you guys that got your kits already. I'm still waiting for my SSCs to be delivered.

heck, i've had mine built for a while now...  ;)
they are working nicely with strings I had problems with in v2 and v3,  ;D

Title: Re: Lynx SSR4, the SSR4 with DMX option***All Packages SHIPPED***
Post by: Kwajtony on August 20, 2013,

Most Excellent.  Package arrived yesterday.  Nice Job,  many thanks for all you trouble.

Title: Re: Lynx SSR4, the SSR4 with DMX option***All Packages SHIPPED***
Post by: gforman on August 21, 2013,

pagkage arrived yesterday

thanks again for running this COOP

Title: Re: Lynx SSR4, the SSR4 with DMX option***All Packages SHIPPED***
Post by: etkfixr on August 29, 2013,

Got it!  Thanks very much.

Title: Re: Lynx SSR4, the SSR4 with DMX option***All Packages SHIPPED***
Post by: drlucas on August 29, 2013,

Mine arrived too! thanks! And magically no duty on this one. yeah!