DiyLightAnimation

Hardware => Panther DMX Player => Topic started by: golights on November 02, 2013,

Title: Sequence builder
Post by: golights on November 02, 2013,

I can't seem to get the builder to look for my sd card. It will only let me select drive c.  I have the card in a card reader plugged into a usb port.

Title: Re: Sequence builder
Post by: TexasStingray on November 02, 2013,

Does windows explorer see ?

Title: Re: Sequence builder
Post by: golights on November 03, 2013,

yes,

Title: Re: Sequence builder
Post by: TexasStingray on November 03, 2013,

that is really strange. I know that it only reads the drives when the application first launches. So, if you insert it after words it will not refresh.

Scott

Title: Re: Sequence builder
Post by: Steve Gase on November 03, 2013,

what capacity SD card?  ...and does your SD reader/writer handle that capacity?
I've got some older devices that don't support the newer SDHC cards.

Title: Re: Sequence builder
Post by: golights on November 04, 2013,

Thanks all for your replys and suggestions.  It was a mistake on my part.  I was not using a sd card but a compact flash.  It sees my sd card. I guess I have way to many pieces to this puzzle I call fun.   Looking forward to receiving the Panther and putting it to work. 

Ken

Title: Re: Sequence builder
Post by: arw01 on November 04, 2013,

Glad you found your issue was simple.

Sometimes with multiple sd cards and readers one has to go into the disk manager and tell windows to change the drive letters.

Alan

Title: Re: Sequence builder
Post by: StanB on February 01, 2014,

I'm having the same issue.  I have the SD card plugged into a new Targus reader that Explorer lists as drive E:.  When I start the sequence builder, it only allows me to select drive C:.  Dell Inspiron 15 running Windows 8.

Title: Re: Sequence builder
Post by: arw01 on February 01, 2014,

Can you post up a screen capture of the right click properties of the sd card from the explorer tree?

Title: Re: Sequence builder
Post by: TexasStingray on February 01, 2014,

I think I found the issue, when I get home in a few hours I'll fix it and repost a new file.

Title: Re: Sequence builder
Post by: TexasStingray on February 01, 2014,

Ok, there is a new installer up there and if you just want the files here they are in a zip file. I think you can just replace the exist files. Please let me know how this works.

https://dl.dropboxusercontent.com/u/58620146/Panther/PantherSequenceBuilder.zip

Scott

Title: Re: Sequence builder
Post by: StanB on February 01, 2014,

It's working now.  Thanks!