DiyLightAnimation

Store => Finished COOPS => Topic started by: RJ on April 29, 2009,

Title: Case Coop
Post by: RJ on April 29, 2009,

I am trying to get as much of the coop stuff done early in the year so we can work on our shows.

This is a coop for cases for the Dongle, Wireless Transmitter, Wireless RX unit.

The prices should be in the range of what has been quoted before in this post
http://diylightanimation.com/index.php?topic=1120.msg10482#msg10482

This means without even getting a high count it is only a buck or so more to have them machined. I can not get an exact amount until the coop is done and we know the numbers. I will be sending completed units for them to fit the PCBs perfect to insure thet are as tight a fit as you can get.

The coop will be have three items to order.

1 - Dongle case
2 - Wireless TX case
3 - Wireless RX case

Not sure how often we can get a large enough order together to make it cost effective so get what you want.

The coop will run till June 1st at 8:00 pm E.S.T.

All coop rules will apply.
Shipping will be in the smallest usps flat rate box that your order can fit in.
a number of cases can fit in the new small one that is $5.95 but I will add the cost of signature confirmation as I require this on costly shipments now.

Post in this thread the number of #1, #2, and #3 you want.

RJ

Title: Re: Case Coop
Post by: RJ on April 29, 2009,

Member Name

Paid

Ship

PJNMCT

smartcontrols

MtnBikeMN

Ron

MrChristmas2000

tlh

REM

blearning

basis21b

Cobergas

cBell

grossg

DPingel

zman

vziukas

Blackbeard

vairmoose

wbuehler

OriginalHotrodder

abell

magic8192

wjgiles50

D56VillageNut

brandonj

knguyen916

WWNF911

Randy_A

DonRoss

KeithTarpley

Brad

claytor1999

bagley2000

dmaccole

Hauvega

31swford

gjbankos

memphislights

snething

Sly

lonewolf41

n1ist

bfenlason

lortiz

Sloanhaus

blickensderfer

jnealand

wirekat

wbe12345

solidmodeler

wbbb1

ThaiWay

cmorda

johno123

rclark

rohr1

lizard050

Rbar

tstewart

sharkjaw

tpctech

deplanche

scottl480

djgreg3823

Chance

Tigman009

jonalt

budude

mrvoltage

lbro

tombmatt

mschell

kylec

Ron D

Totals :

137

148

215

Title: Re: Case Coop
Post by: RJ on April 29, 2009,

RJ, Please put me in for the following:

#1 - 3 of them
#2 - 3 of them
#3 - 3 of them

Thanks RJ

RJ

Title: Re: Case Coop
Post by: PJNMCT on April 29, 2009,

RJ,

3 of each please.

Thanks again,
-Paul

Title: Re: Case Coop
Post by: b_legg on April 29, 2009,

RJ,

#2 - 1 of em
#3 - 2 of em

Thanks!
Brian

Title: Re: Case Coop
Post by: smartcontrols on April 29, 2009,

RJ, Please put me in for the following:

#1 - 2 of them
#2 - 2 fo them
#3 - 2 of them

Thanks
Jeff

Title: Re: Case Coop
Post by: MtnBikeMN on April 29, 2009,

Please put me down for:

1qty - #1
2qty - #2

Thanks!

Title: Re: Case Coop
Post by: Ron on April 29, 2009,

Put me down for:

#1 - 4 of them
#2 - 3 of them
#3 - 4 of them

Thanks.

Ron

Title: Re: Case Coop
Post by: MrChristmas2000 on April 29, 2009,

Put me down for:

#1 - 3 of them
#2 - 4 fo them
#3 - 4 of them

Tnx,

Tom

Title: Re: Case Coop
Post by: tlh on April 29, 2009,

RJ,
Please put me down for the following:

#2 - 2 of them
#3 - 4 of them

Thanks,
Terry

Title: Re: Case Coop
Post by: REM on April 29, 2009,

Put me down for:

#1 - 4 of them
#2 - 2 of them
#3 - 2 of them

--Ron

Title: Re: Case Coop
Post by: blearning on April 29, 2009,

put me down for
#1 2 of them
#2 4 of them
#3 8 of them

Title: Re: Case Coop
Post by: basis21b on April 29, 2009,

I would like:

#2 - 1 of them
#3 - 4 of them

Thanks,
Tom

Title: Re: Case Coop
Post by: Cobergas on April 29, 2009,

RJ

Please put me down for the following.
1-1
2-1
3-1
One of each kind sir.

Title: Re: Case Coop
Post by: PJNMCT on April 29, 2009,

You are not allowed to view links. Register or Login

RJ,

3 of each please.

Thanks again,
-Paul

...make that 2 2 10 please.

-Paul

Title: Re: Case Coop
Post by: cBell on April 29, 2009,

I'll take:

#1 x 1
#2 x 2
#3 x 5

As always, Thanks RJ!

Title: Re: Case Coop
Post by: grossg on April 29, 2009,

RJ, Please put me in for the following:

#1 - 2 of them
#2 - 2 of them
#3 - 12 of them

Best regards,
Glen

Title: Re: Case Coop
Post by: DPingel on April 30, 2009,

RJ,

Please put me down for:

2 - #1 - Dongle case
1 - #2 - Wireless TX case
1 - #3 - Wireless RX case

Thanks,

David

Title: Re: Case Coop
Post by: zman on April 30, 2009,

Please put me in for the following:

#1 x 3
#2 x 3
#3 x 26

Would any of these work for the SSR4's?

Mark

RJ > no the SSR4 uses different cases.

Title: Re: Case Coop
Post by: vziukas on April 30, 2009,

RJ,

#1 - 1 of em

Thanks!
Vytas

Title: Re: Case Coop
Post by: Blackbeard on April 30, 2009,

Put me down for two #2 TX cases.

Thanks

steve

Title: Re: Case Coop
Post by: Blackbeard on April 30, 2009,

Add to my request, please:

1 #1 Dongle case.

Total now should be:

1 - #1 Dongle
2 - #2 TX

Thanks very much.

steve

Title: Re: Case Coop
Post by: davel295 on April 30, 2009,

Sign me up for:

#1 - 1 ea
#2 - 1 ea
#3 - 4 ea (assuming the RX case fits the EX/RX)

Thanks,

Dave

// No there is no case for the EX/RX please update me on what you want. // RJ

RJ, I was thinking case #3 was for the Lynx Express - please modify my order to one each of #1 and #2.

Thanks,
Dave

Title: Re: Case Coop
Post by: vairmoose on April 30, 2009,

Please Add me to the list

#1 - 3 (dongle)
#2 - 2 (Tx)
#3 - 2 (rx)

Larry

Title: Re: Case Coop
Post by: wbuehler on April 30, 2009,

May I get the following

Dongle Qty 2
TX Qty 2
RX Qty 4

Thanks

Bill

Title: Re: Case Coop
Post by: OriginalHotrodder on April 30, 2009,

Hi RJ,

Please put me down for:

1 - Dongle case 1 ea.
2 - Wireless TX case 1 ea.
3 - Wireless RX case 4 ea.

Ed

Title: Re: Case Coop
Post by: abell on April 30, 2009,

Please put me down for:

1 - Dongle case 2 ea.
2 - Wireless TX case 1 ea.
3 - Wireless RX case 5 ea.

Title: Re: Case Coop
Post by: magic8192 on April 30, 2009,

RJ, Please put me in for the following:

#1 - 1 of them
#2 - 1 of them

Thanks RJ

-David

Title: Re: Case Coop
Post by: wjgiles50 on April 30, 2009,

Please sign me up for:

#1 - 2 of them
#2 - 2 of them
#3 - 4 of them

Sorry I didn't read all of the instructions first

Thanks
Bill

Title: Re: Case Coop
Post by: D56VillageNut on April 30, 2009,

RJ,

Could you put me down for:

2 of the #1 - Dongle cases.

Alan T

Title: Re: Case Coop
Post by: brandonj on April 30, 2009,

Two of each for me, please!

-Brandon

Title: Re: Case Coop
Post by: Blackbeard on April 30, 2009,

Could this COOP also include the mounting screws also? I believe they quote a price of $2.50/100, which adds $0.10 per case if we buy multiples of 25 cases. I sure had a time finding them around here.

Thanks for any considerations.

steve

Title: Re: Case Coop
Post by: RJ on April 30, 2009,

You are not allowed to view links. Register or Login

Could this COOP also include the mounting screws also? I believe they quote a price of $2.50/100, which adds $0.10 per case if we buy multiples of 25 cases. I sure had a time finding them around here.

Thanks for any considerations.

steve

Yes, they are hard to find locally.
RJ

Title: Re: Case Coop
Post by: RJ on April 30, 2009,

Please guys post in a different thread to ask your questions. It makes the coop thread messy and hard to keep track of the request. If your not sure of the amount you want do to a question PM me or post asking outside the coop thread allows one post with the correct number for you.

Thanks

RJ

Title: Re: Case Coop
Post by: knguyen916 on April 30, 2009,

#1 - 2 of them
#2 - 2 of them
#3 - 4 of them

thanks

Title: Re: Case Coop
Post by: DonVW on May 01, 2009,

#1 - Two of them
Thanks
DonVW

Title: Re: Case Coop
Post by: WWNF911 on May 01, 2009,

#1 - 2 of them
#2 - 2 of them
#3 - 6 of them,.... please

Thanks

Leon

Title: Re: Case Coop
Post by: Randy_A on May 01, 2009,

#1 - 1
#2 - 1
#3 - 4

Thanks RJ!

Randy

Title: Re: Case Coop
Post by: DonRoss on May 01, 2009,

RJ, Please put me in for the following:

#1 - 2 of them
#2 - 2 of them
#3 - 2 of them

Thanks

Title: Re: Case Coop
Post by: KeithTarpley on May 01, 2009,

Greetings,,,

#1 - 8 (Dongle case)
#2 - 8 (Wireless TX case)
#3 - 12 (Wireless RX case)

Thank you.

Keith

Title: Re: Case Coop
Post by: RPM on May 01, 2009,

RJ,

I'll take

#1 - 2 of them
#2 - 2 of them
#3 - 2 of them

Thanks

Robert

Title: Re: Case Coop
Post by: Brad on May 01, 2009,

RJ,

#2 x 1
#3 x 1

Brad

Title: Re: Case Coop
Post by: claytor1999 on May 02, 2009,

Hi RJ,

2 of #2
2 of #3

Thanks,
Robb

Title: Re: Case Coop
Post by: bagley2000 on May 02, 2009,

2 - Wireless TX case # 2
4 - Wireless RX case # 3

Thank You

Title: Re: Case Coop
Post by: dmaccole on May 02, 2009,

For me, please include

#1 -- 1
#2 -- 2
#3 -- 3

Thanks.

\dmc

Title: Re: Case Coop
Post by: Hauvega on May 02, 2009,

I would like

2 of #2
3 of #3

Thanks
Eric

Title: Re: Case Coop
Post by: davel295 on May 02, 2009,

RJ, I modified my earlier request, but don't see me in the totals yet. Please put me down for:

Case #1 - 1ea
Case #2 - 1ea

Thanks,

Dave

Title: Re: Case Coop
Post by: 31swford on May 02, 2009,

1-#1 case
1-#2 case
3-#3 case

Thanks for spearheading the case coop. Looks like it's gonna be good!

Title: Re: Case Coop
Post by: gjbankos on May 02, 2009,

I have a request for 1 dongle case and 1 wireless transmitter case, so that means:

#1 - 1
#2 - 1

If I am not correct, please correct me. Thank you.

Title: Re: Case Coop
Post by: memphislights on May 02, 2009,

#1 - 2 dongle cases

Thanks.

Title: Re: Case Coop
Post by: snething on May 03, 2009,

Please count me in for:

2 - #1 Dongle Cases
2 - #2 Tx Cases
2 - #3 RX Cases

Thanks again for all of you efforts RJ!!!!

Scot

Title: Re: Case Coop
Post by: MrChristmas2000 on May 03, 2009,

Please change my order as follows:

Was:
#1 -- 3
#2 -- 4
#3 -- 4

Change to:
#1 -- 3
#2 -- 3
#3 -- 2

Thanks
Tom

Title: Re: Case Coop
Post by: Sly on May 03, 2009,

Please put me down for

#1 - 2 of them
#2 - 2 of them
#3 - 5 of them

Thanks

Title: Re: Case Coop
Post by: lonewolf41 on May 04, 2009,

RJ, Please put me in for the following:

#1 - 1 of them
#2 - 1 of them

Thanks,
-Keith

P.S. I am also ordering some PCB's in that coop and LE's in that one. Can we combine all this to save shipping costs? Sorry if this is common knowledge.

Title: Re: Case Coop
Post by: n1ist on May 04, 2009,

RJ-
Please put me down for

1 dongle case
2 tx cases
5 rx cases

Thanks.
/mike

Title: Re: Case Coop
Post by: urgeoverkill on May 04, 2009,

Put me down for
TX - qty 2
RX - qty 2

Title: Re: Case Coop
Post by: zman on May 04, 2009,

Please change mine to the following:

#1 x 3
#2 x 3
#3 x 4

Thanks Mark

Title: Re: Case Coop
Post by: DonRoss on May 05, 2009,

Plz put me in for

1 each # 2 - Wireless TX case
1 each # 3 - Wireless RX case

Title: Re: Case Coop
Post by: bfenlason on May 05, 2009,

Put me down for:

#1 - 2 of them
#2 - 2 of them
#3 - 1 of them

Thanks......

Title: Re: Case Coop
Post by: lortiz on May 06, 2009,

Order the following for me:

#1 - 1 ea
#2 - 1 ea
#3 - 1 ea

Thanks......

Title: Re: Case Coop
Post by: teager23336 on May 06, 2009,

RJ,

I would like
#1 - 2 (Dongle case)
#2 - 2 (Wireless TX case)
#3 - 2 (Wireless RX case)
Thanks,
-Harold

Title: Re: Case Coop
Post by: Sloanhaus on May 07, 2009,

1 number 2
10 number 3

Title: Re: Case Coop
Post by: blickensderfer on May 08, 2009,

3 #2 TX
15 #3 RX

Thanks,
Dan

Title: Re: Case Coop
Post by: RJ on May 08, 2009,

Ok,

While not a exact quote until we send the PCB's to them the rough estimate is in.

If we can hit 100 of each which it looks like we could this is the ball park.

The dongle and transmitter :
the cases cost $3.34 for one non machined one.
The machined ones in the coop will be about $3.67 each.

The RX unit :
the cases cost $3.50 for on non machined one.
the machined ones in the coop will be about $3.83 each.

There will be shipping split for them to me and then your shipping plus paypal fees.

RJ

Title: Re: Case Coop
Post by: jnealand on May 13, 2009,

RJ Please put me down for
#1 - 2
#2 - 1
#4 - 4

Thanks
Jim Nealand

Title: Re: Case Coop
Post by: vairmoose on May 13, 2009,

RJ..

It is more than worth the extra quater to get the cases machined (and a spare or two).. please change my request to :

#1 - 4
#2 - 4
#3 - 4

Larry (and thanks)

Title: Re: Case Coop
Post by: WWNF911 on May 14, 2009,

You are not allowed to view links. Register or Login

Ok,

While not a exact quote until we send the PCB's to them the rough estimate is in.

If we can hit 100 of each which it looks like we could this is the ball park.

The dongle and transmitter :
the cases cost $3.34 for one non machined one.
The machined ones in the coop will be about $3.67 each.

The RX unit :
the cases cost $3.50 for on non machined one.
the machined ones in the coop will be about $3.83 each.

There will be shipping split for them to me and then your shipping plus paypal fees.

RJ

Thankyou sooooo much for going the extra mile on this for us RJ! Thats terrific news and a great price for a machined case!

Leon

Title: Re: Case Coop
Post by: wirekat on May 14, 2009,

Please put me down for:
Two each #1 cases
Two each #2 cases
Four each #3 cases

THANKS!

Title: Re: Case Coop
Post by: wbe12345 on May 18, 2009,

RJ

Please put me down for the following:
#1- 2 cases
#2- 2 cases
#3- 1 case

thanks
Wallace
wbe12345

Title: Re: Case Coop
Post by: RPM on May 18, 2009,

RJ

Please ADD to my order:

#1 - 4 more cases for a total of 6

Thanks

Robert

Title: Re: Case Coop
Post by: solidmodeler on May 18, 2009,

Put me down for 2 - kit #1 and 2 - kit #2

Thanks

Title: Re: Case Coop
Post by: wbbb1 on May 21, 2009,

RJ I would like two of #1; one of #2. Thanks

Title: Re: Case Coop
Post by: ThaiWay on May 25, 2009,

Here I go:

1 x #1 Dongle
1 x #2 TX
1 x #3 RX

Thanks RJ!

John

Title: Re: Case Coop
Post by: knguyen916 on May 25, 2009,

change mine ot the following please

knguyen916 2 2 0

You are not allowed to view links. Register or Login

#1 - 2 of them
#2 - 2 of them
#3 - 4 of them

thanks

Title: Re: Case Coop
Post by: cmorda on May 26, 2009,

Please add the following for me:

1 dongle case
1 tx case
1 rx case

Thanks!

Chris

Title: Re: Case Coop
Post by: johno123 on May 26, 2009,

Hi All,

Let's do:

0 x Dongle
2 x Tx
2 x Rx

Title: Re: Case Coop
Post by: PJNMCT on May 26, 2009,

You are not allowed to view links. Register or Login

You are not allowed to view links. Register or Login
RJ,

3 of each please.

Thanks again,
-Paul

...make that 2 2 10 please.

-Paul

RJ,

I don't know why but I thought the rx cases were for the ex/rx's. I only need 3 of the rx cases after all.

Please put me back to 2, 2, 3 now.

Thanks,
-Paul

Title: Re: Case Coop
Post by: rclark on May 27, 2009,

Please put me down for:

Qty 2 - #1 Dongle case

Richard Clark
Allen, TX

Title: Re: Case Coop
Post by: wbe12345 on May 28, 2009,

RJ

Please put me down for the following:

Qty Item
2 #1 - Dongle case
2 #2 - Wireless TX case
2 #3 - Wireless RX case

Thanks
Wallace

Title: Re: Case Coop
Post by: rohr1 on May 28, 2009,

#1- 2 of them

#2- 1 of them

Title: Re: Case Coop
Post by: scottl480 on May 29, 2009,

RJ,

Put me down for 2 of the #1

Scott

Title: Re: Case Coop
Post by: lizard050 on May 29, 2009,

please put me down for #1-1, #2-1, #3-2

Title: Re: Case Coop
Post by: Rbar on May 30, 2009,

My order:
1. qty 3
2 qty 4
3 qty 4
Thank you!
Rbar

Title: Re: Case Coop
Post by: vairmoose on May 30, 2009,

Just to make sure the boards from the other COOP have a home, please adjust the number of case to the following:

#1 - Dongle case 3 (no change here)
#2 - Wireless TX case 4
#3 - Wireless RX case 7

Larry

Title: Re: Case Coop
Post by: tstewart on May 31, 2009,

RJ, Please put me in for the following:

#1 - 4 of them
#2 - 4 of them
#3 - 4 of them

Thanks

Todd

Title: Re: Case Coop
Post by: sharkjaw on May 31, 2009,

RJ:

Please put me in for:

#1 - 1
#2 - 1

Is it possible to combine shipping with your other co-op or would that end up being too chaotic?

Thanks!
Sharkjaw

Title: Re: Case Coop
Post by: tpctech on May 31, 2009,

Please count me in for the following:

#1 - Dongle case 2
#2 - Wireless TX case 2
#3 - Wireless RX case 4

Thanks RJ

TPCTECH Ken

Title: Re: Case Coop
Post by: deplanche on June 01, 2009,

#1 - 2 dongle cases.
#2 - 2 Wireless TX cases
#3 - 4 Wireless RX cases

Thanks RJ

Title: Re: Case Coop
Post by: lonewolf41 on June 01, 2009,

I would like to increase my order so that the new total quantity for me is:

#1 - need 2 total (was 1)
#2 - need 2 total (was 1)

Thanks,
-Keith

Title: Re: Case Coop
Post by: djgreg3823 on June 01, 2009,

RJ:
Please put me down for
#1 x 2
#2 x 2
#3 x 2
Thank you!

Greg

Title: Re: Case Coop
Post by: Chance on June 01, 2009,

Please put me down for:

#1 1

Thank you!

Title: Re: Case Coop
Post by: Tigman009 on June 01, 2009,

I will take Qty 1 for the dongle. I bought the lynx express from the last coop, are one of these cases for that? If so I would like to have Qty of 1

Title: Re: Case Coop
Post by: RJ on June 01, 2009,

From the coop post :

Quote

The coop will be have three items to order.

1 - Dongle case
2 - Wireless TX case
3 - Wireless RX case

Title: Re: Case Coop
Post by: wbuehler on June 01, 2009,

Can I increase my order by 2 cases for the Wireless TX and Wireless RX to make it a total of 4 for each?

Thanks

Bill

Title: Re: Case Coop
Post by: RJ on June 01, 2009,

NO!!!!!! >:(

Well OK! ;D

RJ

Title: Re: Case Coop
Post by: tstewart on June 01, 2009,

RJ, Please adjust my order to the following:

#1 - 2 of them
#2 - 4 of them
#3 - 6 of them

Thanks

Todd

Title: Re: Case Coop
Post by: jonalt on June 01, 2009,

RJ:

Please order

2 of # 1
2 of # 2

Thanks: John

Title: Re: Case Coop
Post by: smartcontrols on June 01, 2009,

Hi RJ,

Please increase my order by 1 of each case:

#1 – new total 3 (was 2)
#2 – new total 3 (was 2)
#3 – new total 3 (was 2)

Thanks
Jeff

Title: Re: Case Coop
Post by: Sloanhaus on June 03, 2009,

Please add

1 of number 1
2 of number 2

Title: Re: Case Coop
Post by: ron d on June 03, 2009,

1 of 1
1 of 2
2 of 3

Title: Re: Case Coop
Post by: b_legg on June 05, 2009,

RJ,

I'll need to get out of this coop as well. Please cancel my order.

Thanks,
Brian

Title: Re: Case Coop
Post by: rohr1 on June 06, 2009,

RJ

Can i please add 2 #3's to my order?

Title: Re: Case Coop
Post by: budude on June 06, 2009,

Hoping I can still sneak in here (was supposed to end 6/1)?

If so, I would like:

2x TX Case
2x Rx Case

Thanks!
Brian

Title: Re: Case Coop
Post by: RJ on June 06, 2009,

Actually,

Since the beta is still going I can't see cosing it till I can send PCB's for the company to fit to the cases. Unless someone has a good reason.

RJ

Title: Re: Case Coop
Post by: Sloanhaus on June 14, 2009,

PLease add 2 number 1's and 1 more number 2

Title: Re: Case Coop
Post by: Sloanhaus on June 16, 2009,

please change mine to

2 of number 1
2 of number 2
13 of number 3

Thanks

Sloan

Title: Re: Case Coop
Post by: mrvoltage on June 16, 2009,

I like to get one of each.

1 of case 1
1 of case 2
1 of case 3

Thanks, Donald

Title: Re: Case Coop
Post by: RJ on June 17, 2009,

We've hit 500 cases! :o

RJ

Title: Re: Case Coop
Post by: vairmoose on June 17, 2009,

The mfg will be happy about that!

Larry

Title: Re: Case Coop
Post by: lbro on June 18, 2009,

If I can, can I get 2 Dongle cases, please?

Title: Re: Case Coop
Post by: rclark on June 24, 2009,

Looks like you are still taking requests - if it is not too late ...

Please put me down for:

#1 - 2
#2 - 0
#3 - 0

Title: Re: Case Coop
Post by: tombmatt on June 24, 2009,

RJ

Could I get 1 of each.
that is

1 #1
1 #2
1 #3

Thanks
Tom

Title: Re: Case Coop
Post by: mschell on June 27, 2009,

If it's still possible, I'd like to get the following:

#1 - 1
#2 - 2
#3 - 2

Let me know when you need payment.

Thanks,

Mark

Title: Re: Case Coop
Post by: lonewolf41 on June 27, 2009,

Please add 2 of #3 to my order.

Thanks,
-Keith

Title: Re: Case Coop
Post by: RJ on June 27, 2009,

All should be current at this time. The coop closes in 2 days so make sure the list on the second post of this thread shows correctly what you want.

RJ

Title: Re: Case Coop
Post by: Sloanhaus on June 27, 2009,

Can you change mine to

1 2
2 2
3 6

Title: Re: Case Coop
Post by: lizard050 on June 28, 2009,

Please adjust my order to

#1 - 2
#2 - 2
#3 - 3

Title: Re: Case Coop
Post by: kylec on June 28, 2009,

Can I please get:

#1 x 3
#2 x 3

Thanks,

Kyle ;D ;D

Title: Re: Case Coop
Post by: deplanche on June 29, 2009,

I got very, very confused with all the different terminologies and Kit numbers...

Please change mine to

#1 - Dongle Case - 2 ea
#2 - TX Case - 2 ea
#3 - RX Case - none

Thanks. And sorry for the change.

Title: Re: Case Coop
Post by: RJ on June 29, 2009,

In case I had not been clear this coop closes with the others at 8 PM tonight. Get your orders correct!

RJ

Title: Re: Case Coop
Post by: mschell on June 29, 2009,

Need to bump up mine to:

Dongle - 1
TX Case - 3
RX Case - 3

Mark

Title: Re: Case Coop
Post by: deplanche on June 29, 2009,

You are not allowed to view links. Register or Login

I got very, very confused with all the different terminologies and Kit numbers...

Please change mine to

#1 - Dongle Case - 2 ea
#2 - TX Case - 2 ea
#3 - RX Case - none

Thanks. And sorry for the change.

Please make the #3 RX case - 1 ea.

Thanks again... and sorry for the multiple changes.

Title: Re: Case Coop
Post by: RJ on June 29, 2009,

Coop is closed. I will not be able to send a pm for payment until the Current pcb's come in for the wireless and I send them out to the case company. I will get a firm quote at that time and send you a pm for payment. This will be a likely three to four weeks out. Be patient until then.

RJ

Title: Re: Case Coop
Post by: RJ on July 22, 2009,

Ok I will be building units with the new pcb's and sending them to polycase to get them started fitting them and machining them.

RJ

Title: Re: Case Coop
Post by: RJ on July 28, 2009,

I built the pcb's and am shipping them out to polycase to get final quote. As soon as I have the price I will PM for payment and we can get the order going.

To recap the dongle is the normal non flanged case and the wireless will have the flanged case which cost a few cents more but everyone wanted that to be able to mount them upright to keep water out.

RJ

Title: Re: Case Coop
Post by: RJ on July 29, 2009,

The units have been sent to polycase. I did find the price they quoted did not include the 3 setup fees for each different case but it will average out over the number so it should not make much difference. They will get me the total quote including screws for the pcbs and shipping.

I hope to have this in 4-5 days and an estimate of lead time to ship once we get the payments, pay them and tell them to go.

If we get the coop payments quick I hope we an have cases in a month. I don't know about you guys but I sure could use mine!

RJ

Title: Re: Case Coop
Post by: RJ on August 07, 2009,

I got the quote from Polycase.

It includes the following :

The case, the machining, the setup fee split between all of the units of that case being ordered, The little screws for the PCBs that are sold seperate, The shipping to me split between the units of each cases, paypal and coop fee.

It does not include the cost to ship them to you. This will be handled at the end when I know what it will take to get them to you.

The Dongle cases will be $4.63 each
The Tx cases will be $4.74 each
The RX cases will be $4.86 each

Please DO NOT SEND ME ANY PAYPAL FOR THESE! I am not ready to accept them yet.

I will post and tell everyone when to send it.

They gave me a time line of 3 weeks after we send them the order til they ship to me.

RJ

Title: Re: Case Coop
Post by: RJ on August 15, 2009,

You are not allowed to view links. Register or Login

I got the quote from Polycase.

It includes the following :

The case, the machining, the setup fee split between all of the units of that case being ordered, The little screws for the PCBs that are sold seperate, The shipping to me split between the units of each cases, paypal and coop fee.

It does not include the cost to ship them to you. This will be handled at the end when I know what it will take to get them to you.

The Dongle cases will be $4.63 each
The Tx cases will be $4.74 each
The RX cases will be $4.86 each

RJ

OK it's time to get the payments in on this coop so I can get them cutting and you can get your cases in about a month. No time to waste so get the payments in to me.

Follow three rules to make this work. If they are not followed I'll refund the payment and ask you to redo it. All of this is so important to me handling the numbers of not just sometimes multiple coops going at the same time but the everyday PCB requests and payments I get from everyone. It can get confusing if all the info is not in the paypal payment itself.

1 - Make sure your current and correct SHIPPING address is setup in Paypal. And make sure you do not mark the payment as services which removes the shipping address from what I see. And do not choose payment type as echeck or anything but instant payment. I can not hold up coops for a week for echecks to clear.

2 - Make sure you calculate up the amount correctly based on the number of cases listed in the coop list on the second post of this coop. Just multiply the amounts listed in the previous post by the amount of the cases you ordered. Do this for each type of case and add them all together. I added the coop and paypal fee for each case to the amount as well as its share of the expected shipping cost and setup fee.

3 - Make sure in the comments you put it is for the case coop and the numbers of each case you ordered then put your username in the comments also.

Now to save you and I alot of time and double check that all this information is in your payment before you click to send it.

This gets paypaled to jordanra@embarqmail.com

As soon as everyone pays or we have waited enough, which ever is first I will close it out and order dropping those that have not payed. If enough people do not pay that we drop below a level on price I will work it into the shipping cost to you, but I do not expect this to happened. We have some room on two of them since we are between levels.

RJ

Title: Re: Case Coop
Post by: joshuashu on August 16, 2009,

will their be any extra dongle cases at all?

Title: Re: Case Coop
Post by: RJ on August 16, 2009,

Was not planning on ordering but a few extra.

RJ

Title: Re: Case Coop
Post by: cmorda on August 20, 2009,

OK I finally sent in my payment. Sorry for holding this up.

Just a humble suggestion: It is helpful for me to have the final cost of the coop in the payment PM. Even if it is not totaled up. It saves a lot of time poking around on my phone browser looking for the prices and writing them down. I didn't have access to a computer earlier this week.

Of course it is even better when it is all totaled up but I recognize that takes a lot of extra work and I don't expect that.

Chris

Title: Re: Case Coop
Post by: Sloanhaus on August 23, 2009,

Hey RJ,

I know you said you were only going to order a few extra but here's my question. My wife had cut me off a while back so I didnt get to order as much stuff as I wanted. I now got a good commission check so the bank is back open. I know the coops are finished, but are we able to order cases directly from the manufacture (I know they will be more) or do we have to wait for another coop). I would like to get yours but I understand if we cant order more.

Thanks

Sloan

Title: Re: Case Coop
Post by: RJ on August 24, 2009,

You are not allowed to view links. Register or Login

Hey RJ,

I know you said you were only going to order a few extra but here's my question. My wife had cut me off a while back so I didnt get to order as much stuff as I wanted. I now got a good commission check so the bank is back open. I know the coops are finished, but are we able to order cases directly from the manufacture (I know they will be more) or do we have to wait for another coop). I would like to get yours but I understand if we cant order more.

Thanks

Sloan

You can order cases from them direct but not machined ones. They have a minimum to setup and machine cases this is why we did the coop. They also set the price by quanitity and you don't want to pay what they want for say 5 of them or even 10. :o

I will have some extra and since I do not have room to store more stuff I want you guys to take them off my hands! This was the best I could do. I could not order large quanititys more than what was on the coop.

RJ

Title: Re: Case Coop
Post by: Sloanhaus on August 24, 2009,

Dont worry, you wont have to store much stuff, soon as you list it, I am all over it... Especially the wireless boards... Thanks for all that you have done.

Title: Re: Case Coop
Post by: RJ on August 28, 2009,

I have a shipping notice. But be calm they are I guess sending my boards back since I also got a notice that they have begun processing our cases. They sent me a nice cad layout of their machineing also.

Said it would be about 3 weeks they thought before they all shipped.

RJ

Title: Re: Case Coop
Post by: tlwhite99 on August 29, 2009,

I would like #1 1
#2 2
#3 2

RJ please forgive my ignorance but please let me know when and how much to pay i do not want to miss out...I am new and just starting also I am looking at doing 16 plus channels so if you advise i need more or less let me know. I am not really sure what i am doing and kind of flying at the hip.

Title: Re: Case Coop
Post by: RJ on August 29, 2009,

I am sorry but this coop is closed and ordered so I can not add you to it. I will have a couple extras when they come in that I will post in the for sale area but they will go fast I think so get them when I post them.

RJ

Title: Re: Case Coop
Post by: MrChristmas2000 on September 01, 2009,

Can you give us an ETA on the cases?

Thanks,

Tom

Title: Re: Case Coop
Post by: RJ on September 01, 2009,

Quote

They gave me a time line of 3 weeks after we send them the order til they ship to me.

RJ

Ordered last week so at least 2 more weeks before I have them.

RJ

Title: Re: Case Coop
Post by: RJ on September 16, 2009,

Still Waiting. I was told this week they should be done.

RJ

Title: Re: Case Coop
Post by: RJ on September 18, 2009,

I have five big packages waiting to be picked up from polycase and shipped to me. So next weekend I guess I will be boxing up a bunch of cases to mail out.

RJ

Title: Re: Case Coop
Post by: wbuehler on September 18, 2009,

Cool

Bill

Title: Re: Case Coop
Post by: mschell on September 18, 2009,

Excellent! I just assembled my dongle (backup to my Enttec USB DMX Pro), and after I get the PIC programmed, I'll be ready for that case!

My wireless RX/TX are ready for their cases as well!

Title: Re: Case Coop
Post by: RJ on September 23, 2009,

cases have all arrived.
RJ

Title: Re: Case Coop
Post by: wbuehler on September 23, 2009,

Title: Re: Case Coop
Post by: RJ on September 23, 2009,

Shipping payment pm's have been sent to all. Let me know if you did not get one and should have.

RJ

Title: Re: Case Coop
Post by: MrChristmas2000 on September 24, 2009,

Done! ;D ;D ;D

Title: Re: Case Coop
Post by: MrChristmas2000 on September 29, 2009,

What is the shipment status?

Title: Re: Case Coop
Post by: Sloanhaus on September 30, 2009,

Got mine today. These are beautiful. Can't wait to see what rj has left over

Title: Re: Case Coop
Post by: mschell on September 30, 2009,

I got a shipment of cases today, but not from RJ. I had ordered some cases for the SSR4's that I'm building, and they showed up today.

Don't know if RJ has had time to update things, but hopefully I'll see another package soon.

Title: Re: Case Coop
Post by: RJ on September 30, 2009,

Everyone that had paid shipping by Sunday afternoon were packed and shipped. Everyone after that will be waiting for next Monday for shipping.

RJ

Title: Re: Case Coop
Post by: REM on October 01, 2009,

What an awesome finishing touch. At first I thought the TX wasn't going to fit. It's snug but does slide up and in there just right. Money well spent! Oh, and thanks for making it happen RJ! You are the man.

Title: Re: Case Coop
Post by: mschell on October 01, 2009,

Got my cases in the mail today. Put the dongle in it's case, and it looks great!

Transmitter is next.

Now all I need is my DMX splitter PCB's, and I'll almost be ready! (yeah, right!)
;)

Title: Re: Case Coop
Post by: Ron on October 01, 2009,

Got mine today too. Kudo's to RJ for making this happen.

It will be nice to not have a bunch of naked dongles floating around for the first time ever!

Ron

Title: Re: Case Coop
Post by: wbuehler on October 01, 2009,

Received cases as well

Thanks RJ and family

Bill

Title: Re: Case Coop
Post by: Tigman009 on October 01, 2009,

Love the dongle case. It makes it look great. Wish I would have ordered a case for my transmitter that I just built.

Title: Re: Case Coop
Post by: MrChristmas2000 on October 02, 2009,

This concerns me. I would have expected a shipment by now. It is now Friday, and it is usually 3 days from RJs.

I sure hope it comes today or my concerns will escalate.

Tom

Title: Re: Case Coop
Post by: RJ on October 02, 2009,

You are not allowed to view links. Register or Login

This concerns me. I would have expected a shipment by now. It is now Friday, and it is usually 3 days from RJs.

I sure hope it comes today or my concerns will escalate.

Tom

When did you send your shipping payment in or what was the paypal transaction number for it?

RJ

Title: Re: Case Coop
Post by: MrChristmas2000 on October 02, 2009,

My bad. :( Somehow the payment got sent to the wrong party. :-[ PayPal picked up the last person I had sent a payment to instead of sending it to you. I was in a hurry and my cut and paste didn't work correctly. I will resend it today.

Title: Re: Case Coop
Post by: deplanche on October 02, 2009,

Got my cases yesterday. Boards going in them this weekend. Now if only I have some logos to put on the outside of the wireless cases... hint, hint.

Title: Re: Case Coop
Post by: Randy_A on October 02, 2009,

They are right here:

http://diylightanimation.com/wiki/index.php?title=Equipment

Listed as graphics...

Title: Re: Case Coop
Post by: deplanche on October 02, 2009,

I checked there... see it for the dongle, but not for any of the wireless stuff.

Title: Re: Case Coop
Post by: Randy_A on October 02, 2009,

:'(

Sorry about that..

Title: Re: Case Coop
Post by: KeithTarpley on October 02, 2009,

Greetings,,,

There is this...

http://diylightanimation.com/wiki/index.php?title=Image:Lynx_hardware.jpg

Expand in your favorite program. (The tail's an antenna...) ;D

Keith

Title: Re: Case Coop
Post by: RJ on October 02, 2009,

I will post the graphics in a day or so.

RJ

Title: Re: Case Coop
Post by: blearning on October 02, 2009,

cases in here as well ..

Thanks

Title: Re: Case Coop
Post by: tlh on October 03, 2009,

Got mine yesterday! Boards fit beautifully. Thanks, RJ!
Terry

Title: Re: Case Coop
Post by: budude on October 03, 2009,

Got mine this week - very nice!

Title: Re: Case Coop
Post by: n1ist on October 03, 2009,

Got mine (and the splitters). Thanks.
/mike

Title: Re: Case Coop
Post by: WWNF911 on October 10, 2009,

Hey RJ,

Back late tonight from being out of town. Thanks for running this CoOp! My naked DLA stuff thanks you 2!! :)

Did a quick inventory. Should have:
2 Dongle
2 Wireless Transmitter
6 Wireless Receiver

Everything is here except missing 3 case lids for the Wireless Receiver cases.

Leon

Title: Re: Case Coop
Post by: RJ on October 10, 2009,

You are not allowed to view links. Register or Login

Hey RJ,

Back late tonight from being out of town. Thanks for running this CoOp! My naked DLA stuff thanks you 2!! :)

Did a quick inventory. Should have:
2 Dongle
2 Wireless Transmitter
6 Wireless Receiver

Everything is here except missing 3 case lids for the Wireless Receiver cases.

Leon

Pm me your address and what your missing and I will mail it out.

RJ

Title: Re: Case Coop
Post by: OriginalHotrodder on October 15, 2009,

Got all the cases as ordered today RJ.
Thank you for all the work you do (and have done) for all of us.

Ed

Title: Re: Case Coop
Post by: RJ on November 27, 2009,

coop is closed and final.

RJ