DiyLightAnimation

Hardware => Lynx Aether => Topic started by: DanHouston on January 08, 2014,

Title: Screws through case?
Post by: DanHouston on January 08, 2014,

Anyone putting something on the screws that go through the case or not a concern for water penetration?

Title: Re: Screws through case?
Post by: knguyen916 on January 08, 2014,

I wasn't concerned. Two years still no issues with mine. But if your worried you can just dab on WAP clear silicon (used for windows)

You are not allowed to view links. Register or Login

Anyone putting something on the screws that go through the case or not a concern for water penetration?

Title: Re: Screws through case?
Post by: taybrynn on January 08, 2014,

I've used them in all my old LOR controllers without problems in Colorado.  On the LE cases I've drilled small holes through the exterior mounting "feet" and just fed wire through those holes and it was just as easy to attach to things (stands, display items, fences) and no need for a screwdriver in the case.   

Title: Re: Screws through case?
Post by: Steve Gase on January 08, 2014,

i  have screws in some of the 16 units -- some with 4, some with just a single screw, and many with no screws at all.


no problems with water intrusion.


all work ok and dissapate heat without issue.

Title: Re: Screws through case?
Post by: DanHouston on January 08, 2014,

Thanks!

Title: Re: Screws through case?
Post by: meman on January 08, 2014,

I don't even drill holes. Just used self-tapping sheet metal screws right through the case and into the heat sink. Have even torn a couple back down and reseated the self-tapping screws again. No problems with moisture in FL rains.

Mike E.