DiyLightAnimation

Hardware => Lynx Zeus => Topic started by: txag2008 on January 16, 2014,

Title: Zeus dimensions
Post by: txag2008 on January 16, 2014,

Does anyone have the physical dimensions (length/width) for the Zeus?  It'd also be nice to know the hole spacings in the pcb for mounting purposes.   I couldn't find this in a thread or anywhere in wiki.

(http://www.diylightanimation.com/wiki/images/thumb/0/0f/Z16-15.jpg/800px-Z16-15.jpg)

(http://www.diylightanimation.com/wiki/images/thumb/e/eb/Zeus8-Fin.jpg/800px-Zeus8-Fin.jpg)

Title: Re: Zeus dimensions
Post by: dcwehw99 on January 16, 2014,

Zeus 16 = 10" X 5.5"      9 13/16" X 5 5/16"
Zeus 8 = 6.75" X 5.25"   6 9/16" X 5 1/8"

I'll get hole spacing when I get home.

Denny

Title: Re: Zeus dimensions
Post by: maffeirw on January 16, 2014,

I got a hair smaller when I measured the outer dimensions of my boards but I would go with Denny's just to be sure they will fit where you want to put them.
I measured the mounting holes as follows:
Zeus 16 = 8" X 4"
Zeus 8  =  5 7/16" X 3 13/16"

Title: Re: Zeus dimensions
Post by: dcwehw99 on January 16, 2014,

Maffeirw,
You're right about the dimensions being smaller.  I used an old tape the first time and I just measured it again with a new tape measure.  These should be more accurate:

Zeus 16 = 9 13/16" X 5 5/16"
Zeus 8 = 6 9/16" X 5 1/8"

Thanks for getting the hole measurements.

Denny

Title: Re: Zeus dimensions
Post by: txag2008 on January 17, 2014,

Thanks for look at that guys.  Will help in figuring out my mounting options without actually having a Zeus yet.


I made a quick drawing off those dimensions that I'll share if anyone is interested.

(http://i39.tinypic.com/zksrb9.jpg)