DiyLightAnimation
Hardware => Lynx Express => Topic started by: UncleBuck on January 25, 2014,
-
I had a channel dead so after replacing the triac it was still not working. I figured the triac was ok so I went to cut the leads on the triac but forgot I still had the unit plugged in <fp.. After a puff of smoke, few sparks and a loud #%$^&@ I replaced the fuse and everything works including the dead channel. I need a new pair of cutters now. <fp.
-
As long as you're OK it's and exciting time.
-
You'll want to keep those triac-fixing cutters around "just in case" you have another dead channel.
-
Had one of those experiences myself with an SSR that I was closing the lid on and the ends of the ground that I should have covered hit the hot side of the fuse...