DiyLightAnimation

Store => Finished COOPS => Topic started by: lonewolf41 on August 20, 2015,

Title: Aether II COOP - ALL SHIPPED
Post by: lonewolf41 on August 20, 2015,

This is a coop for the Aether II.  Info on this item can be found here: http://diylightanimation.com/index.php?board=31.0 and in the wiki.  This coop is for Kits that will include the PCB with parts, plus...there will be a separate Heatsink/PCB/pigtail option available with this coop.

By joining this Coop you also agree that the Coop manager, DLA (as a board to also include all administrators, moderators, and members) shall not be held for any liability.  You are joining this Coop at your own risk.

As with any Coop this Coop is subject to the forum rules.  These rules can be reviewed using the following link.

http://diylightanimation.com/index.php?topic=111.0

There are lenses being offered as separate kits on the coop based on an availability in stock at the time of order placement.  These will go to members in order of their orders being placed until they are all gone.  Any member left that ordered them will not receive them and will receive a refund for the lens kit cost as we will not back-order any since this would hold up the coop shipment for everyone else.

The manual and BOM are in the wiki. http://diylightanimation.com/wiki/index.php?title=Equipment

The kits do not include the light housing or 12v AC Landscape Transformer the member will need to purchase these separate. It does use the same housing as the original Aether.

The Coop will be limited to 150 Aether II kits.  This Coop will close on September 11, 2015 at 11:00 PM Eastern Time or when 150 Aether kits have been reached. Once the Coop is closed, I will send each member a PM with the details of their order and what payment is due.  Full payment is expected when the coop is closed since orders cannot be made until all members have paid.  Please get your PayPal payments in as soon as you get the Coop invoice PM since the sooner you pay me, the sooner you get your parts. Please ensure your PayPal address info is up to date.

For shipping, two Aether II kits with no lenses will fit in a small priority box for $6.15 to the US.  Anything more than that will have to go in a larger box ($13.09 to the US for a medium which will hold a lot of kits)  Final shipping costs will be sent with the payment PM.

Here are the pricing details at initial ordering amounts.  Pricing includes 3% PayPal and 3% Coop fees.  As always, higher numbers should reduce pricing.  We will need a minimum of 50 Aether II kits to make this coop feasible.

Kit 1 - Lynx Aether II  kit – PCB with parts (limit of 150 kits)
@ Qty 50 - $86.37 per kit

Kit 2 - SP model lens - Spot which is 15 deg (currently 56 in stock)
@ Qty 10 - $6.65 per lens

Kit 3 - NF model lens - Narrow flood which is 24 deg (currently 282 in stock)
@ Qty 10 - $6.65 per lens

Kit 4 - WF model lens - Wide flood which is 45 deg (currently 92 in stock)
@ Qty 10 - $6.65 per lens

Kit 5 - PCB/Heatsink/Pigtail only kit - Just those 3 hard to get items will be in this kit.
@ Qty 50 - $13.72 per kit

Post with the quantity of each kit you wish to order in this thread.  Please do not post questions or your thoughts in the Coop thread. Start a new thread in the correct area for these. Coop threads are strictly for people requesting or modifying orders. If you later wish to change your quantity please post again clearly stating that this is an update to a previous order and how many you wish it to be now.

Change your order as you wish during the ordering portion of the Coop, but please make sure I can tell what you are changing and desired numbers.  Please check the order list that follows to make sure I don't miss your order or any changes as the Coop continues and at the end of ordering.

****************************************************
If you wish for insurance on the package you will need to check for the rate at USPS.com and add this to your PayPal payment. Then you must include in the PayPal comments that you want $xxx value insurance on the package. We cannot be responsible for lost or damaged uninsured packages once dropped off to USPS and we have a confirmation showing that they accepted and shipped it.

Thanks,
-Keith

Title: Re: Aether II COOP - OPEN FOR ORDERS
Post by: lonewolf41 on August 20, 2015,

Updated 11-13-15 @ 10:32pm

 

Member ID	Kit 1	Kit 2	Kit 3	Kit 4	Kit 5	Paid	Insurance	Shipped
bcstuff (http://diylightanimation.com/index.php?action=profile;u=1929)	2	-	-	-	-	Y		Y
emcee (http://diylightanimation.com/index.php?action=profile;u=2247)	2	-	-	2	2	Y		Y
loveroflife96 (http://diylightanimation.com/index.php?action=profile;u=1739)	1	-	-	-	3	Y		Y
Made2Rock (http://diylightanimation.com/index.php?action=profile;u=622)	4	-	-	4	-	Y		Y
njKeever (http://diylightanimation.com/index.php?action=profile;u=2088)	1	-	-	-	-	Y		Y
peteywhit (http://diylightanimation.com/index.php?action=profile;u=5701)	2	-	-	2	-	Y		Y
pwalstead (http://diylightanimation.com/index.php?action=profile;u=2206)	1	-	-	1	1	Y		Y
supergumby (http://diylightanimation.com/index.php?action=profile;u=1576)	-	-	-	-	3	Y		Y
Voltorb (http://diylightanimation.com/index.php?action=profile;u=3729)	3	-	-	-	-	Y		Y
Totals	16	0	0	9	9

Title: Re: Aether II COOP - OPEN FOR ORDERS
Post by: lonewolf41 on August 20, 2015,

Also reserved for me.

Title: Re: Aether II COOP - OPEN FOR ORDERS
Post by: supergumby on August 20, 2015,

3 of Kit 5

Thanks,
/Don

Title: Re: Aether II COOP - OPEN FOR ORDERS
Post by: emcee on August 20, 2015,

2 of kit 1,
2 of kit 4,
and 2of kit 5
Thanks, Mike

Title: Re: Aether II COOP - OPEN FOR ORDERS
Post by: Made2Rock on August 20, 2015,

I'll take

4 of kit #1
4 of Kit #4

Thanks
Joe

Title: Re: Aether II COOP - OPEN FOR ORDERS
Post by: Voltorb on August 20, 2015,

3 of kit #1 please!

Thanks for running this coop!

Title: Re: Aether II COOP - OPEN FOR ORDERS
Post by: njKeever on August 20, 2015,

One kit 1
Thank you!

Title: Re: Aether II COOP - OPEN FOR ORDERS
Post by: pwalstead on August 20, 2015,

One each of kit #1, 4, and 5 please.

Title: Re: Aether II COOP - OPEN FOR ORDERS
Post by: loveroflife96 on August 21, 2015,

(1) of kit #1; (3) of Kit #5

Thanks!

Title: Re: Aether II COOP - OPEN FOR ORDERS
Post by: bcstuff on August 23, 2015,

Keith,
Please put me down for:

2 - Kit 1 - Lynx Aether II  kit

Thanks,
Brian

Title: Re: Aether II COOP - OPEN FOR ORDERS
Post by: peteywhit on August 23, 2015,

2 - Kit 1 - Aether II Kit
2 - Kit 4 - WF Lens

Thanks!

Title: Re: Aether II COOP - CLOSED FOR ORDERS - Getting quotes
Post by: lonewolf41 on September 18, 2015,

Even thought we did not make the minimum, I will go ahead and process the COOP with the numbers we have.  I am gathering quotes and will send payment PM's soon.

Thanks,
-Keith

Title: Re: Aether II COOP - Payment PM's sent - Please pay ASAP
Post by: lonewolf41 on September 25, 2015,

Payment PM's have gone out.  Please pay ASAP and let me know if you did not get one.

Thanks,
-Keith

Title: Re: Aether II COOP - Payment PM's sent - Please pay ASAP
Post by: Voltorb on September 26, 2015,

Payment sent.  Thanks for running the coop!

Title: Re: Aether II COOP - Payment PM's sent - Please pay ASAP
Post by: peteywhit on September 30, 2015,

Payment sent! Thanks for the coop.

Blake

Title: Re: Aether II COOP - Payment PM's sent - Please pay ASAP
Post by: Iced on September 30, 2015,

Dang, I missed out on this one....

Title: Re: Aether II COOP - Payment PM's sent - Please pay ASAP
Post by: Made2Rock on October 01, 2015,

Payment has been sent

Title: Re: Aether II COOP - Payment PM's sent - Please pay ASAP
Post by: loveroflife96 on October 02, 2015,

Paid yesterday :-) 

Title: Re: Aether II COOP - ORDERING PARTS
Post by: lonewolf41 on October 02, 2015,

All payments are in and I am ordering parts.

-Keith

Title: Re: Aether II COOP - ORDERING PARTS
Post by: lonewolf41 on October 12, 2015,

Just an update.  All the electronic parts are in.  PCB's have been ordered.  Pigtails have been ordered and should be in this week I would imagine.  Hardware will be in this week or next.  Long lead item will be the PCB's. 

Thanks,
-Keith

Title: Re: Aether II COOP - ORDERING PARTS
Post by: lonewolf41 on October 25, 2015,

I am out of town this week, but not much is going on anyway.  The pigtails are in.  I am waiting on the PCB's.  Also, I need to get the heatsinks done which will be more difficult since they sold our shear at work, but I have a backup plan.  Will try and get them done in the next few days.

Thanks,
Keith

Title: Re: Aether II COOP - ORDERING PARTS
Post by: lonewolf41 on November 05, 2015,

Quick update.  Everything is in except the hardware which should be here Monday.  Got heatsinks built last weekend.  Should get everything sorted and ready except for the hardware this weekend (wife will help as always).  Just add hardware on Monday/Tuesday and they should go out next week.

Thanks,
-Keith

Title: Re: Aether II COOP - All SHIPPED
Post by: lonewolf41 on November 13, 2015,

All kits shipped out today via priority mail.  You should all get them next week.  Let me know if you experience any problems.

Thanks,
-Keith

Title: Re: Aether II COOP - ALL SHIPPED
Post by: Made2Rock on November 27, 2015,

Keith,

  Thanks for running the coop.

Joe