DiyLightAnimation

Hardware => Lynx Smart String => Topic started by: teberle on November 26, 2015,

Title: LE not flashing lights when plugged into DMX out
Post by: teberle on November 26, 2015,

I have an ether dongle flashed with pixel net firmware, connected to the active hub with a LE plugged into the DMX out.

The LE shows a DMX link light, but when I send data from vixen, the board does not do anything.

The etherdongle is receiving data, the LE passes tests and every thing is set universe 1

Not sure what the issue may be.

Title: Re: LE not flashing lights when plugged into DMX out
Post by: caretaker on November 27, 2015,

The PIC on the active hub MAY need to be re-flashed. 

Title: Re: LE not flashing lights when plugged into DMX out
Post by: tbone321 on November 27, 2015,

Do you know if the ETD is working?  Did you flash the PIC on the HUB?

Title: Re: LE not flashing lights when plugged into DMX out
Post by: teberle on November 28, 2015,

I am going to reflash the active hub and see if that gets it.

Sent from my SM-G900R4 using Tapatalk

Title: Re: LE not flashing lights when plugged into DMX out
Post by: AverageJoeTX on December 02, 2015,

Did the reflash help?
I just ran into this same issue and am hoping reflash will be the fix.

Title: Re: LE not flashing lights when plugged into DMX out
Post by: AverageJoeTX on December 02, 2015,

I have tested the edongle and the active hub is currently running my flex tree