DiyLightAnimation

Hardware => Lynx Express => Topic started by: Tigman009 on December 06, 2016,

Title: Express no output, but tests fine?
Post by: Tigman009 on December 06, 2016,

I have a trusty controller that just decided not to work tonight. The data lights are on and when in test mode all 16 channels light up. But that is it. When the song is going I get no lights to come on. I am running cat 5 in and cat 5 out. The cat 5 out that goes to my tree works just fine. Any ideas?
As always thanks in advance for the help.

Title: Re: Express no output, but tests fine?
Post by: tbone321 on December 06, 2016,

Move the cat out to the DMX2 output and see if the tree still works.

Title: Re: Express no output, but tests fine?
Post by: Tigman009 on December 07, 2016,

Yes moving it to DM X out 2 tree still works

Title: Re: Express no output, but tests fine?
Post by: Tigman009 on December 07, 2016,

I replaced that controller with my last spare and all is good. Still would appreciate feedback so that I can fix this one as a spare.  Thanks in advance

Title: Re: Express no output, but tests fine?
Post by: WWNF911 on December 07, 2016,

Looks like the basic parts of the circuit are working going by what you described in test mode. It seems you only have an unresponsive controller brain so to speak. Have you tried re-flashing the PIC?

Title: Re: Express no output, but tests fine?
Post by: tbone321 on December 08, 2016,

Ok, that shows that the 485 is still working.  Check your fuses as well.  What version is this LE?

Title: Re: Express no output, but tests fine?
Post by: chrisatpsu on December 08, 2016,

lately in reflashing pics. I've had to erase the chip first, then flash the firmware back on for it to stick. It might be an occasional side effect of the newer programming software from MicroChip

Title: Re: Express no output, but tests fine?
Post by: tbone321 on December 08, 2016,

That is probably more of an issue with the Pickit-3 than just the software.  The Pickit-2 is a programmer while the Pickit-3 is a debugger and they do behave differently.

Title: Re: Express no output, but tests fine?
Post by: sabie on December 08, 2016,

mine when it did this had a bad h11aa1 chip bad located between transformer and fuse

Title: Re: Express no output, but tests fine?
Post by: Tigman009 on December 08, 2016,

It is a ver 5.0. I have no way to reflash as I dont have a pic thingy. Guess I need to get the Pic 3?

Title: Re: Express no output, but tests fine?
Post by: WWNF911 on December 08, 2016,

You can send it to me if you'd like. I have a Pickit-2. Just let me know.