DiyLightAnimation
Store => Finished COOPS => Topic started by: RJ on July 05, 2010,
-
This Co-Op is for the Lynx Express version 5 kit.
*********************************************************************************
There is no options on this coop. The PCB's or Heatsinks alone are avaliable from me already.
This coop is for parts, PCB and heatsink.
No kits will contain the Cases as it is just as cost effective for the users to order them and easier for the coop managers.
This Coop will close on July 31th 2010 at 8:00 PM Eastern Standard Time zone. Full Payment is expected when the coop is closed no orders can be made until all members have paid. All members will receive PM’s or be directed by post how to pay once the coop closes with details.
Please get your paypal payments in as soon as you get the Co-Op invoice PM as no orders can be placed until all payments have been received.
By joining this Co-Op you also agree that the Co-Op manager, DLA (as a board to also include all administrators, moderators, and members) shall not be held for any liability. You are joining this Co-Op at your own risk.
What is a Lynx Express you may ask?
Well the Lynx Express is a 16 Channel controller based off the popular Lynx and FreeStyle designs but with some nice new features. The Lynx Express supports on board push button start address programming, the ability to program the Pic without removing it from the controller, and On board diagnostics. In addition this controller has some advanced features.
Some of the features are:
1. Custom dimming (LNT) curves that can be assigned on a per channel basis. What this means is that you can have standard and Led light strings plugged into your controller and be able to get them to dim at the same rate.
2. Testing. If you have problems with your LE. You can now put the LE into a diagnostics mode that will help isolate those problems.
3. Wireless Yes that’s right this controller will support a plug and play module that allows your controller to go wireless with the addition of the wireless equipment.
4. Built in snubber resistors to help LED users. no need to add the resistor plugs on you led strings as they are built in. This does not effect standard light users.
As with any Co-Op this Co-Op is subject to the forum rules. These rules can be reviewed using the following link.
Forum Co-Op rules
http://diylightanimation.com/index.php?topic=111.0
You will receive all the parts you need for the complete kit. To complete your setup you will need power cords for the AC hookup and a DMX dongle to use along with the Vixen or LightShowPro software programs. At the time of this writing I can only suggest the use of the Lynx USB DMX adapter or the Enttec Pro. There are other adapters that can be used but due to issues that have been found with them I cannot recommend them.
Now for the pricing.
We have a base goal of 50 kits. This goal allows the cost per unit to drop low enough to make it cost effective to run the coop. below this number we will not make the order.
Pricing is below broken into the 50 unit levels. The pricing below will include all fees, shipping and handling charges to get the items to the Coop Manager.
*****50 Kit Level*****
Lynx Express Complete Kit /w heatsink (No Case) $68
This is an estimate and the previous coops have all beat this in the past. The larger the amount the better the pricing most times.
Shipping will be based on the USPS flat rate box. This is the box that will ship in the US for $10.70 a box and international for $43.45 Canada and Mexico $26.95. This is the shipping cost per flat rate box we can fit about 6 kits in a single flat rate box but can go to a larger flat rate box for larger orders for a few dollars more up to twelve. If you wish to have insurance on your package it is your responsiblity to choose the amount and lookup the cost to add. You must add this to your paypal payment and in the comments explain you paid for insurence and how much. We can not be held responsable for you packaged once accepted at the post office and we have a receipt of shipment if it is not insured.
Post with the quanitity you wish in this thread. Please do not post questions or your thoughts in the coop thread. Start a new thread in the correct area for these. Coop threads are strickly for people requesting orders. If you later wish to change your quanity please post again clearly stating that this is a update to a previous order and how many you wish it to be now.
If you have any questions please post a new thread to help keep the coop thread clean.
Thanks for all the help in completeing the coop.
RJ
-
Should this be moved to the current coop section to avoid confusion?
-
| Member Name | ordered | Paid |
| pete peters | 3 | Y |
| BigGunFish | 3 | Y |
| Hod | 10 | Y |
| cpnbnanamn | 1 | Y |
| Freebird | 5 | Y |
| DPingel | 1 | Y |
| PVPlaceLights | 2 | Y |
| joshuashu | 1 | Y |
| lonelycarpent | 3 | Y |
| ronniek | 3 | Y |
| Arvin | 2 | Y |
| castortiu | 8 | Y |
| matt_grooms | 3 | Y |
| hbomb341 | 6 | Y |
| Rainlover | 2 | Y |
| jsalz | 1 | |
| trekster | 1 | Y |
| jandelee | 2 | Y |
| tennhillbilly | 1 | Y |
| dmorey | 4 | Y |
| FlashG | 2 | Y |
| CaptainBli | 2 | Y |
| eric923 | 2 | Y |
| dcwehw99 | 4 | Y |
| cardoc13 | 2 | Y |
| dmaccole | 1 | Y |
| bugless | 2 | Y |
| mschell | 1 | Y |
| Jeffl | 4 | Y |
| sittinguphigh | 1 | Y |
| MrC | 1 | Y |
| theavguy99 | 2 | Y |
| Lineman | 4 | Y |
| Jem5136 | 2 | Y |
| Indianachristmas | 2 | Y |
| mnarel | 10 | Y |
| | |
| | |
| Total : | 104 |
-
Please put me down for :
Three kits
Thanks
Pete Peters
-
Rj,
Please add me for 3 kits,
Thanks
Stephen
-
Please put me down for ten kits.
Thank you,
Hod
-
Put me down for one... I may increase that before the coop closes.... Thanks RJ for all you do!
-Roger
-
I will take 3 kits pretty please..
Freebird.
-
I would like 1 please.
Thanks
David
-
Please put me down for two kits.
Thank you,
--Matt
-
RJ,
put me down for 1 kit please.
-
I will take 3 kits please. Thanks -0)
lonelycarpenter
-
Put me down for ten kits as well.
-
Please add me for 3 kits,
Thanks,
Ronniek
-
Put me down for 2 kits.
Looks like they will be done before the dongle gets done! :(
Arvin
-
Rj,
Please put me down for 4 kits.
Thank you,
Castor
-
RJ,
Please update my quantity to have 4 more, to a total of 8 kits.
Thanks,
Cas
-
RJ,
My first Co-Op;
Three kits please.
Matt - San Antonio, TX
-
RJ,
Put me down for two (2).
Harrison
-
I am powerless to resist this coop.
Please put me down for 2
John
-
put me in for 1 kit
-
Please put me down for one (1) kit please.
Thank You
Ron
-
Please put me down for 2 kits.
My first controller kits, and my first coop.
-
Please put me in for (1 )Lynxx Express kit. Thanks for all you and your dad do.
-
RJ, we're finally ready to do it.
Please put me down for 4 kits.
Deanna
-
Hey RJ
This COOP ends on July 31 and I will be out of the country from the 27 to Aug 5. I will not have internet until I get back. Hope this does not hold up the COOP. Sorry if it causes any delay.
Thanks
Ronniek
-
Hey RJ
This COOP ends on July 31 and I will be out of the country from the 27 to Aug 5. I will not have internet until I get back. Hope this does not hold up the COOP. Sorry if it causes any delay.
Thanks
Ronniek
NP as long as I know you do want your kits and you will get back with me when you return we can move on.
RJ
-
Please put me down for 2 kits.
Thanks
Mark G
-
Put me down for 2.
Thank you,
Brent
-
Please put me down for 2
Thank you. eric923
-
Please put me down for four (4) kits.
Thanks
Denny
-
please put me down for two, like father like son, one for me and my son , finally talked the wife into itl
-
RJ,
Put me down for two (2).
Harrison
RJ,
Add four (4) more for a total of six (6). It's just Money - Might as well fill the box.
Harrison
-
Please put me down for one.
Thanks.
\dmc
-
please put me down for 2
thanks
bugless
-
I'll take one. Just in case I need another controller...
-
4 please.
-
Please put me down for one.
Thanks
Mort
-
Please put me down for 1.
Thank you,
--Stacy
-
Put me down for 2 please.
Thanks
-
The Coop is now Closed. It will be locked until the PM's go out to the members of the coop. I will be getting quotes and such together Monday and will get pm's for payments out in as soon after as I can.
RJ
-
Coop payment PM's have all been sent. You should have them. If anyone is missing please PM me and let me know.
RJ
-
The Coop list on post #3 has been updated to show payments. We have 8 users to pay yet. Please get your payments in as soon as possible as we need to get orders placed.
RJ
-
4 more people to go on the payments. Please get them in before Monday Morning as I will be ordering and any outstanding kits will be posted in the for sale area and sold first come.
Guys please do not pm me asking for them already they have til Monday and then they will be posted for everyone to get. <wd..
RJ
-
Coop is right on track. ;D <pop..
RJ
-
Thanks RJ! I got my 4 kits today. That was quick! Of course I only live about half an hour away from you. ;D
-
Should this CO-OP be closed? Or can I still get in on this? :P
-
The Coop is now Closed. It will be locked until the PM's go out to the members of the coop. I will be getting quotes and such together Monday and will get pm's for payments out in as soon after as I can.
RJ
Sorry guy.... It is closed.
Ron
-
Wife just called and said my Package from RJ showed up this morning!!! AWESOME. all the way across the country from Florida to Washington State!!! Thanks RJ.
Freebird
-
Got Mine today. I wasn't aware they were even shipped yet. Thanks RJ !!
-
I just got mine in today, I also didn't know they had even been shipped.
Thanks much RJ!!!
Jesse
-
got home today and had a package! wow that was quick! Thanks RJ!
-
Package showed up at my doorstep as well.
More stuff to do - less time to do it...!
-
OKLAHOMA
Got mine today. Thank you Mr. R.J.
And especially Mr. J.J.
Ron
-
Please thank J.J. as he does 90% of the work. he killed it in a couple days so they went out early. SURPRISE!!!!!! ;D
RJ
-
Please thank J.J. as he does 90% of the work. he killed it in a couple days so they went out early. SURPRISE!!!!!! ;D
RJ
Yes, J.J. -- thanks so much. Big surprise on the doorstep when I got back from errands this afternoon.
\dmc
-
Thanks JJ got mine today
-
I got mine today too - AWSOME!!!!! Thank You guy's!!!!!
Harrison
-
It is sad to say that I am working on getting the heatsink on the first one I received today?? Only another hour and I should be up and blinky flashy:D
Thanks again RJ and JJ!
Jesse
-
As always, Thank JJ. Awesome job and great surprise!! We all appreciate it so much.
Freebird
-
Surprise was right. I wasn't expecting these for at least a couple more weeks. Thanks to the both of you that was fast.
My soldering iron is getting a lot of use lately.
-
It is sad to say that I am working on getting the heatsink on the first one I received today?? Only another hour and I should be up and blinky flashy:D
Thanks again RJ and JJ!
Jesse
Had not heard anything did you get your other one working?
RJ
-
Got mine today and I'm in San Diego. Putting the first one together now. My wife doesn't understand why I'm so excited.
Thanks RJ!
--Matt
-
Got the package today... thanks for put the Coop so fast.
Cas
-
It is sad to say that I am working on getting the heatsink on the first one I received today?? Only another hour and I should be up and blinky flashy:D
Thanks again RJ and JJ!
Jesse
Had not heard anything did you get your other one working?
RJ
Not yet, I have been toying around with it, but I need to just sit down and re-solder some of it. Hopefully it will work after that.
Jesse
-
Not yet, I have been toying around with it, but I need to just sit down and re-solder some of it. Hopefully it will work after that.
Jesse
Let me know if you need assistence.
RJ
-
Thanks J.J. Mine were waiting on the doorstep (San Antonio, TX) when I got home 1600 hrs Wednesday! Last I heard the parts were ordered; had no idea you were already filling baggies, and boxes and shipping!!!
We're all fortunate to have y'all doing this stuff on our behalf.
Thanks again,
Matt
-
Is it too late to get these for this coop ? If not I would like 3 please
btw I would need the 240v versions
-
Got mine yesterday. Day started very bad. The day turned great when I found the kits at home. Then went bad......Stayed up too late drooling over the kits. ;D
You guys amaze me on the quick turn around.
Thanks
FlashG
-
i got mine it's time to get to work!
THANKS RJ & JJ
I finished my first one & tested ok
BOY THAT WAS FUN!!!!
-
Everyone should have them by now and so I am moving this coop to the finished coop section.
RJ