DiyLightAnimation
Hardware => Lynx MR16 / 16 CH DC Controller => Topic started by: egenoup on September 13, 2010,
-
The BOM on the wiki needs to be updated with the additional V2 parts. I ordered my parts (3 days before the parts COOP started) and I am missing the LEDs and 1k resistors. I will most likely get them with my MOSFET order.
-
I got the BOM directly from RJ so I didn't even realize it wasn't updated. Here is the link to the correct BOM.
https://www.mouser.com/ProjectManager/ProjectDetail.aspx?State=EDIT&ProjectGUID=ae154b03-a720-4e05-a4e4-de474a3bc141
-
I did update the BOM. But it appears the one on the wiki does not point to my BOM. I will change the link to point at my BOM on mouser.
I will be removing all BOM list that do not point at mouser shortly as we have too many and when they get updated there is always a different one somewhere. From this point on all BOM will point at my mouser parts list so when I update they update.
This will include the ones printed in manuals. The link in the wiki should be all that is needed.
RJ
-
The link to the Mouser BO does not come up for me. It wants me to log in.
I purchased the parts from the old BOM a couple of months ago to build 2 MR16s. What other parts do I need to build the v2?
John
-
Greetings,,,
Try again. Working here and on the phone.
May need to clear your cache.
Keith
-
I cleared the cache and I still can't get to the link that ponddude posted. I tried another pc here at work.
I will work on this some more when I get home.
John
-
Greetings,,,
https://www.mouser.com/ProjectManager/ProjectDetail.aspx?AccessID=56fb4c5b0b should work.
It's the link currently from the Equipment page on the Wiki.
Keith
-
I am really confused!!
The BOM at https://www.mouser.com/ProjectManager/ProjectDetail.aspx?AccessID=56fb4c5b0b is not the same as the BOM posted on the wiki http://diylightanimation.com/wiki/index.php?title=BOM#.23MR16
I ordered the the BOM at Mouser before the current coop, but there are leds and resistors and heat sinks on the other BOM.
Sorry for being so dense.
John