DiyLightAnimation
Hardware => Lynx MR16 / 16 CH DC Controller => Topic started by: johno123 on October 21, 2010,
-
Hey All - I just got my parts for the V2 board. I noticed that I didn't have a 1k resistor that seems to be new and not in the manual right below the clock.
Should I keep empty, or just slip in an extra 1k 1/4 watt resistor that I have laying around?
(http://www.crazyjdesign.com/christmas/IMG_2411.JPG)
-
look here: http://diylightanimation.com/index.php?topic=3376.0
-
Hi everyone.
Sorry, but that resistor was not included in the COOP because the BOM that RJ sent me did not have it listed...just like in the wiki.
Sorry about that.... >:(
-
Short answer - you don't have to have it, but the data LED won't work without it. Not a big loss, but if you want the feel good of being able to see that the DMX512 data iis coming in, stick the 1K 1/4watt resistor in - that's what I did.
RM
-
No big deal on the resistor. I have them. And if someone does not, then spend 99 cents at the shack.
http://www.radioshack.com/product/index.jsp?productId=2062343
Thank You for doing the coop.
Ron