DiyLightAnimation

Hardware => Lynx SSR4 => Topic started by: IndianaChristmas on November 08, 2011,

Title: Issue with my ss4
Post by: IndianaChristmas on November 08, 2011,
I have pulled out my ss4's for testing. I have found two that will light channel 1 but the others don't light or will occasionally flicker when I plug or unplug the light string.
Any ideas?
Thanks.
These units have all the components to be full controllers but I have them set up to be ssr only.  All wires have been double checked as well as solder joints.
Title: Re: Issue with my ss4
Post by: dmaccole on November 09, 2011,
It's it's the optos or the Triacs ... take a known working optocoupler and switch it for one in a bad channel ... if the problem persists, the problem is with the triac; if the problem goes away, then it's the opto that's bad.

\dmc