DiyLightAnimation

Hardware => Lynx Splitter => Topic started by: Jeffl on November 12, 2011,

Title: 680uF capacitor substitute?
Post by: Jeffl on November 12, 2011,
I'm looking for a substitute for the 680uf capacitor mouser part:

647-UHM1C681MPD6
UHM1C681MPD6

http://www.mouser.com/Search/ProductDetail.aspx?qs=9BrxhaXua9Jhj8ACGUwebQ%3d%3d

Is this a good substitute?

647-UHE1C681MPD
UHE1C681MPD

http://www.mouser.com/Search/ProductDetail.aspx?qs=Qeykb4%2fOuN5I7y%252bwpIiP8A%3d%3d




Title: Re: 680uF capacitor substitute?
Post by: n1ist on November 13, 2011,
It's a little taller, but most of the specs are the same or better, so it should work.  The splitter isn't an application where the lower ripple current rating would cause any issues.

/mike
Title: Re: 680uF capacitor substitute?
Post by: Jeffl on November 13, 2011,
Thanks Mike.  Good catch on the height difference.
Title: Re: 680uF capacitor substitute?
Post by: deanathpc on November 16, 2011,
So glad I found this thread...  I was just freaking out about this cap not being available ANYWHERE!!!!  Could have been a show stopper!!!!