DiyLightAnimation

Store => Finished COOPS => Topic started by: n1ist on November 23, 2011,

Title: DMX Tester and DMX Servo Controller COOP [CLOSED for orders]
Post by: n1ist on November 23, 2011,: DMX Servo Controller and DMX Tester coop

This coop will have four items to offer

The manuals, boms, etc, may be found in the WIKI (http://diylightanimation.com/wiki/index.php?title=Equipment).

Item 1 - DMX Servo Controller
This project is is described here (http://diylightanimation.com/index.php?topic=4835.0).
The coop includes the PCB and all components. It does NOT include a case or wireless module (it uses a standard Lynx EX/RX module)
In 50-piece quantities, the cost will be $18.70

Item 2 - Bare DMX Servo Controller PCB
This is just the PCB for the servo controller; order it if you want extra spare boards
In 50-piece quantities, the cost will be $2.92

Item 3 - DMX Tester
This project is is described here (http://diylightanimation.com/index.php?topic=4279.0).

The coop includes the PCB, case, and all components. It does NOT include a wireless module or 4 AA batteries (it uses a modified Lynx EX/RX module)
In 50-piece quantities, the cost will be $29.45

Item 4 - Bare DMX tester PCB
This is just the PCB for the DMX tester; order it if you want extra spare boards
In 50-piece quantities, the cost will be $3.11

Pricing includes PayPal 3% and Coop 3% fees. As always higher numbers reduce pricing and lower numbers increase pricing. Change your order as you wish during the ordering portion of the Coop, but please make sure I can tell which kits you are changing and desired numbers. Please check the order list that follows to make sure I don't miss your order or any changes as the Coop continues and at the end of ordering.

The coop will run till December 14th at 8:00 pm E.S.T. or until we hit $5000 so we can get the PCB order in before holiday shutdowns at the board house.

Shipping will be in regular USPS flat rate boxes, at the rate to your location. A single DMX tester and/or quite a few DMX Servo Controllers will fit in a small box ($5 in the US). Multiple DMX testers will have to go in a medium box ($10.50 in the US)

By joining this Coop you also agree that the Coop manager, DLA (as a board to also include all administrators, moderators, and members) shall not be held for any liability. You are joining this Coop at your own risk.

As with any Coop this Coop is subject to the forum rules. These rules can be reviewed using the following link.
Forum Coop rules
http://diylightanimation.com/index.php?topic=111.0 (http://diylightanimation.com/index.php?topic=111.0)

Post in this thread the number you want. You will get a pm when the coop closes telling what to do to pay for your coop items.
Title: Re: DMX Tester and DMX Servo Controller COOP
Post by: n1ist on November 23, 2011,: Code: You are not allowed to view links. Register or Login
Servo Tester Name Kit PCB Kit PCB Parts and PCBPaid Sent kylec 0 0 1 1 27.91 Y Y gforman 2 2 1 0 61.85 Y Y joatman66 0 0 1 1 27.91 Y Y JerryPlak 2 4 1 1 66.31 Y Y lburnham 2 0 0 0 33.06 Y Y Ron 1 4 1 1 49.78 Y Y shaunkad 1 5 1 2 52.91 Y Y PJNMCT 1 1 1 1 45.77 Y Y mr2hogs 2 0 1 0 59.17 Y Y JoeFromOzarks 3 1 1 1 78.83 Y Y wwwgator 4 4 1 3 102.95 Y Y inzeos 1 2 1 2 48.90 Y Y HollandLights 0 1 0 0 1.34 Y Y smartcontrols 1 0 1 0 42.65 Y Y JonB256 4 0 1 0 92.23 Y Y kgustafson 4 0 2 0 118.35 Y Y pokey 2 2 1 0 61.85 Y Y cBell 1 2 1 0 45.32 Y Y Rod R 1 1 1 0 43.98 Y Y wirekat 1 0 1 0 42.65 Y Y FlashG 2 2 1 1 63.64 Y Y chrisatpsu 0 0 1 1 27.91 Y Y crazybob 0 0 1 1 27.91 Y Y sadkisson 1 3 1 0 46.65 Y Y rcauto 2 0 1 0 59.17 Y Y mikedbom 2 2 1 0 61.85 Y Y John K 4 0 1 0 92.23 Y Y dlhoppe 1 1 1 1 45.77 Y Y deweycooter 3 0 1 0 75.70 Y Y Rainlover 0 0 1 2 29.70 Y Y vairmoose 3 0 2 0 101.82 Y Y wbuehler 2 2 2 2 91.55 Y Y Freebird 2 2 1 1 63.64 Y Y blaha 2 2 1 0 61.85 Y Y Lifeguard326 1 0 1 0 42.65 Y Y caretaker 0 0 1 0 26.12 Y Y bcstuff0 0 2 1 1 30.58 Y Y twwaters 0 0 1 1 27.91 Y Y trekster 0 0 1 1 27.91 Y Y tmcteer 2 0 1 0 59.17 Y Y Night Owl 2 0 1 0 59.17 Y Y Pete 2 2 1 0 61.85 Y Y deplanche 2 0 1 0 59.17 Y Y rimist 2 0 0 1 34.85 Y Y combustionmark 2 2 2 0 87.97 Y Y ducker.richard 2 0 2 0 85.29 Y Y rm357 1 0 1 0 42.65 Y Y JDM1oc 0 0 1 2 29.70 Y Y wftxlites 1 4 1 2 51.57 Y Y koropuxa 2 2 0 0 35.73 Y Y lightguy 0 0 1 0 26.12 Y Y melwell 2 2 0 1 37.52 Y Y RickeyS 1 1 0 0 17.86 Y Y sims101 0 0 1 2 29.70 Y Y johno123 1 0 1 0 42.65 Y Y paul58 2 0 1 0 59.17 Y Y Caliente Chrismas 1 2 0 1 20.99 Y Y CJ 2 4 1 2 68.10 Y Y RJ 1 0 1 0 42.65 Y Y Kainsel 2 2 1 0 61.85 Y Y jess_her 0 4 1 2 35.04 Y Y RobertM 2 1 0 0 34.39 Y Y Donny M. Carter 0 0 1 0 26.12 Y Y pHoZfoRus 2 4 1 1 66.31 Y Y gophergrove 0 3 1 0 30.13 Y Y dmoore 0 0 1 0 26.12 Y Y galgon 0 0 1 0 26.12 Y T TAdamsOK 1 0 1 0 42.65 Y Y kj77rn 0 1 1 0 27.46 Y Y emcee 1 0 1 0 42.65 Y Y egenoup 2 2 0 0 35.73 Y Y travailen 3 0 2 0 101.82 Y Y maffeirw 6 6 1 1 135.09 Y Y Al 0 0 1 0 26.12 Y Y tbone321 0 1 1 0 27.46 Y Y comporder1 0 0 2 0 52.24 Y Y mmciver 0 0 1 0 26.12 Y Y tlh 2 0 2 0 85.29 Y Y OkieJay 1 2 1 2 48.90 Y Y wjgiles50 3 0 1 0 75.70 Y Y dcwehw99 0 0 1 0 26.12 Y Y NeverBRich 4 2 0 0 68.78 Y Y bisquit456 0 0 1 2 29.70 Y Y FireMedic4Christ 0 0 1 1 27.91 Y Y CW 1 0 1 0 42.65 Y Y spud_uk 1 2 0 0 19.20 Y Y mokeefe 2 2 2 0 87.97 Y Y snething 1 2 1 1 47.11 Y Y batdive 0 0 1 0 26.12 Y Y Justtazz 0 0 1 0 26.12 Y Y MrChristmas2000 2 0 1 0 59.17 Y Y tpctech 2 0 2 0 85.29 Y Y IMustangI 0 3 1 1 31.92 Y Y Sparky96 1 4 1 0 47.99 Y Y Michael Munch 5 0 1 0 108.76 Y Y jramirex 2 1 1 1 62.30 Y Y lightsup 0 2 0 1 4.46 Y Y nick 1 0 1 0 42.65 Y Y Hod 2 0 0 0 33.06 Y Y
Title: Re: DMX Tester and DMX Servo Controller COOP
Post by: kylec on November 23, 2011,: I'll jump in!
I'll take

1 item 3
1 item 4

Thanks for running this!

Kyle
Title: Re: DMX Tester and DMX Servo Controller COOP
Post by: gforman on November 23, 2011,: Put me down for

2 of item 1
2 of item 2
1 of item 3

thank for running this COOP

Glen
Title: DMX Tester and DMX Servo Controller COOP
Post by: joatman66 on November 23, 2011,: 1 Item 3
1 Item 4

Thanks!

---
I am here: http://maps.google.com/maps?ll=37.730586,-89.194187
Title: Re: DMX Tester and DMX Servo Controller COOP
Post by: JerryPlak on November 23, 2011,: I'll take
Item 1 - DMX Servo Controller 2 ea
Item 2 - Bare DMX Servo Controller PCB 4ea
Item 3 - DMX Tester 1 ea
Item 4 - Bare DMX tester PCB 1 ea

and Yes thank for running this COOP
Title: Re: DMX Tester and DMX Servo Controller COOP
Post by: lburnham on November 23, 2011,: (2) of Item 1 - DMX Servo Controller please.
Thanks for cooping this..:-)
Title: DMX Tester and DMX Servo Controller COOP
Post by: Ron on November 23, 2011,: I'd like:

1 of item 1
4 of item 2
1 of item 3
1 of item 4

Thanks.

Ron
Title: Re: DMX Tester and DMX Servo Controller COOP
Post by: shaunkad on November 23, 2011,: 1 of kit 1
2 of kit 2
1 ok kit 3
2 of kit 4
Title: Re: DMX Tester and DMX Servo Controller COOP
Post by: PJNMCT on November 23, 2011,: 1 of each please!

Thanks,
-Paul
Title: Re: DMX Tester and DMX Servo Controller COOP
Post by: mr2hogs on November 23, 2011,: 2 of item 1
1 of item 3

Thank you very much
Title: Re: DMX Tester and DMX Servo Controller COOP
Post by: JoeFromOzarks on November 23, 2011,: QTY: 3 - Item 1 - DMX Servo Controller
QTY: 1 - Item 2 - Bare DMX Servo Controller PCB
QTY: 1 - Item 3 - DMX Tester
QTY: 1 - Item 4 - Bare DMX Tester PCB
Total:    $
Thank you very much for all the work and the coop!

:) joe
Title: Re: DMX Tester and DMX Servo Controller COOP
Post by: wwwgator on November 23, 2011,: Please inlude me for the following

Item 1- 4
Item 2- 4
Item 3- 1
Item 4- 3

Thank you.
Title: Re: DMX Tester and DMX Servo Controller COOP
Post by: inzeos on November 23, 2011,: QTY 1 - Item 1 - DMX Servo Controller
QTY 2 - Item 2 - Bare DMX Servo Controller PCB
QTY 1 - Item 3 - DMX Tester
QTY 2 - Item 4 - Bare DMX tester PCB
Title: Re: DMX Tester and DMX Servo Controller COOP
Post by: holland lights on November 23, 2011,: Ill take

Item 2 - 1 pcb

Thanks
Title: Re: DMX Tester and DMX Servo Controller COOP
Post by: smartcontrols on November 23, 2011,: 1 of item 1
1 of item 3

Thanks for doing this
Title: Re: DMX Tester and DMX Servo Controller COOP
Post by: JerryPlak on November 23, 2011,: <fp.
You are not allowed to view links. Register or Login
Oops! Accidentally posted twice...
it can happen ::)
Title: Re: DMX Tester and DMX Servo Controller COOP
Post by: JonB256 on November 23, 2011,: Item 1 - DMX Servo Controller - 4 (four)

Item 3 - DMX Tester - 1 (one)

thanks.
Title: Re: DMX Tester and DMX Servo Controller COOP
Post by: kgustafson on November 23, 2011,: 4 X #1 (Servo Board and components)
2 X #3 (DMX Tester and components)

Much thanks,

Kurt
Title: Re: DMX Tester and DMX Servo Controller COOP
Post by: pokey on November 23, 2011,: I'll take...

2 of #1
2 of #2
1 of #3

Thanks!
Title: Re: DMX Tester and DMX Servo Controller COOP
Post by: cBell on November 23, 2011,: 1x item 1
2x item 2
1x item 3
Title: Re: DMX Tester and DMX Servo Controller COOP
Post by: Rod R on November 23, 2011,: 1X ITEM #1
1x ITEM #2
1X ITEM #3

Thanks,

Rod
Title: Re: DMX Tester and DMX Servo Controller COOP
Post by: wirekat on November 23, 2011,: I'll take...

1 of #1
1 of #3

Thanks!
Title: Re: DMX Tester and DMX Servo Controller COOP
Post by: FlashG on November 23, 2011,: I will take

QTY 2 - Item 1 - DMX Servo Controller
QTY 2 - Item 2 - Bare DMX Servo Controller PCB
QTY 1 - Item 3 - DMX Tester
QTY 1 - Item 4 - Bare DMX tester PCB

Thanks,
Mark G
Title: Re: DMX Tester and DMX Servo Controller COOP
Post by: chrisatpsu on November 23, 2011,: I'll take ...
1 of item #3
1 of item #4
Title: Re: DMX Tester and DMX Servo Controller COOP
Post by: crazybob on November 23, 2011,: Put me down for
QTY 1 - Item 3 - DMX Tester
QTY 1 - Item 4 - DMX Tester PCB

Thank you!
Title: Re: DMX Tester and DMX Servo Controller COOP
Post by: sadkisson on November 23, 2011,: I will take

QTY 1 - Item 1 - DMX Servo Controller
QTY 3 - Item 2 - Bare DMX Servo Controller PCB
QTY 1 - Item 3 - DMX Tester

Thanks,
Scott
Title: Re: DMX Tester and DMX Servo Controller COOP
Post by: rcouto on November 23, 2011,: qty 2 of item 1
qty 1 of item 3

Thank you!
Ricardo
Title: Re: DMX Tester and DMX Servo Controller COOP
Post by: mikedbom on November 23, 2011,: Been waiting for this one...

QTY 2 - Item 1 - DMX Servo Controller
QTY 2 - Item 2 - Bare DMX Servo Controller PCB
QTY 1 - Item 3 - DMX Tester

Thank you very much.

~Mike
Title: Re: DMX Tester and DMX Servo Controller COOP
Post by: John K on November 23, 2011,: (4) of Item 1 - DMX Servo Controller
(1) of Item 3 - DMX Tester

Thanks

John
Title: Re: DMX Tester and DMX Servo Controller COOP
Post by: dlhoppe on November 23, 2011,: One of each please
Title: Re: DMX Tester and DMX Servo Controller COOP
Post by: deweycooter on November 23, 2011,: 3 - Item 1
1 - Item 3

Thanks!
Title: Re: DMX Tester and DMX Servo Controller COOP
Post by: Rainlover on November 23, 2011,: 1 of #3
2 of #4

John
Title: Re: DMX Tester and DMX Servo Controller COOP
Post by: vairmoose on November 23, 2011,: why not -grins-

please put me in for:
(3) of Item 1 - DMX Servo Controller
(2) of Item 3 - DMX Tester

Larry
(aka Vairmoose)
Title: Re: DMX Tester and DMX Servo Controller COOP
Post by: wbuehler on November 23, 2011,: Can I get Kit #1 = 2
Kit #2 = 2
Kit #3 = 2
Kit #4 = 2

Thanks

Bill
Title: Re: DMX Tester and DMX Servo Controller COOP
Post by: Freebird on November 23, 2011,: Kit #1 = 2
Kit #2 = 2
Kit #3 = 1
Kit #4 = 1

Thanks

Freebird
Title: Re: DMX Tester and DMX Servo Controller COOP
Post by: blaha on November 23, 2011,: 2 of Item 1
2 of Item 2
1 of Item 3

Thanks!
Title: Re: DMX Tester and DMX Servo Controller COOP
Post by: Lifeguard326 on November 23, 2011,: I'll take 1 item 1 & 1 item 3
Title: Re: DMX Tester and DMX Servo Controller COOP
Post by: n1ist on November 23, 2011,: Just to remind everyone; items 1 and 3 include the PCBs; items 2 and 4 are for people who want an extra PCB as a spare.
/mike
Title: Re: DMX Tester and DMX Servo Controller COOP
Post by: caretaker on November 23, 2011,: I would like one (1) of item three (3) the DMX test kit.

Thanks for doing this coop.
Title: Re: DMX Tester and DMX Servo Controller COOP
Post by: sadkisson on November 23, 2011,: PLZ Change mine to

QTY 1 - Item 1 - DMX Servo Controller
QTY 3 - Item 2 - Bare DMX Servo Controller PCB
QTY 1 - Item 3 - DMX Tester

Thanks,
Scott
Title: Re: DMX Tester and DMX Servo Controller COOP
Post by: bcstuff on November 23, 2011,: Can I please get:

QTY 2 -- Item 2 - Bare DMX Servo Controller PCB
QTY 1 -- Item 3 - DMX Tester
QTY 1 -- Item 4 - Bare DMX tester PCB

Thanks,
Brian
Title: Re: DMX Tester and DMX Servo Controller COOP
Post by: twwaters on November 23, 2011,: Count me in!

1 Item 3
1 Item 4

Thanks!!
Title: Re: DMX Tester and DMX Servo Controller COOP
Post by: trekster on November 23, 2011,: Qty of 1 of Item 3 - DMX Tester

Qty of 1 of Item 4 - Bare DMX tester PCB

Please and Thank You!

Ron
Title: Re: DMX Tester and DMX Servo Controller COOP
Post by: tmcteer on November 23, 2011,: Please sign me up for:

QTY 2 - Item 1 - DMX Servo Controller Kit

QTY 1 - Item 3 - DMX Tester Kit

Tom
Title: Re: DMX Tester and DMX Servo Controller COOP
Post by: Night Owl on November 23, 2011,: Can I get:

2 - Item 1 - DMX Servo Controller Kit

1 - Item 3 - DMX Tester Kit

Thanks!
Nathan
Title: Re: DMX Tester and DMX Servo Controller COOP
Post by: Pete on November 23, 2011,: Put me down for:

Item 1 = 2

Item 2 = 2

Item 3 = 1

Thanks for doing this COOP -

Pete
Title: Re: DMX Tester and DMX Servo Controller COOP
Post by: deplanche on November 23, 2011,: 2 Kit #1
1 Kit #3

Thanks

Jon
Title: Re: Re: DMX Tester and DMX Servo Controller COOP
Post by: rimist on November 24, 2011,: I'll take

Qty 2 - Item 1 - DMX Servo Controller
Qty 1 - Item 4 - Bare DMX tester PCB

- Rimist

Sent from my HTC Glacier using Tapatalk
Title: Re: DMX Tester and DMX Servo Controller COOP
Post by: combustionmark on November 24, 2011,: I'd like:

2 of item 1
2 of item 2
2 of item 3

Thanks for the coop.

Have Fun
Title: Re: DMX Tester and DMX Servo Controller COOP
Post by: ducker.richard on November 24, 2011,: Please could I order:
2x item 1 (servo controller kit)
2x item 3 (tester kit)

Plus postage to the UK.

Thanks very much!
Title: Re: DMX Tester and DMX Servo Controller COOP
Post by: rm357 on November 24, 2011,: Please put me down for:

Kit #1 - 1
Kit #3 - 1

Thanks!!
RM
Title: DMX Tester and DMX Servo Controller COOP
Post by: JDM1oc on November 24, 2011,: 1 of item 3
2 of item 4

Thanks,

Josh
Title: Re: DMX Tester and DMX Servo Controller COOP
Post by: wftxlites on November 24, 2011,: 1 ea. Item #1
4 ea. Item #2

Thanks,
Greg
Title: Re: DMX Tester and DMX Servo Controller COOP
Post by: koropuxa on November 24, 2011,: I would like to have:
Item 1 Servo kit - 2 pieces
Item 2 Servo PCB- 2 pieces
Title: Re: DMX Tester and DMX Servo Controller COOP
Post by: lightguy on November 24, 2011,: I would like one item three DMX tester please.
Thanks for running this
Lightguy
Title: Re: DMX Tester and DMX Servo Controller COOP
Post by: melwell on November 24, 2011,: Please sign me up for:

2 x Item 1 - DMX Servo Controller

2 x Item 2 - Bare DMX Servo Controller PCB

1 x Item 4 - Bare DMX tester PCB

Thanks,

Mark
Title: Re: DMX Tester and DMX Servo Controller COOP
Post by: RickeyS on November 24, 2011,: 1 of kit 1

1 of kit 2

Thanks
RickeyS
Title: Re: DMX Tester and DMX Servo Controller COOP
Post by: sims101 on November 24, 2011,: Item 3 1
Item 4 2
Title: Re: DMX Tester and DMX Servo Controller COOP
Post by: johno123 on November 24, 2011,: One Item #1
One Item #3

Thanks!

-John
Title: Re: DMX Tester and DMX Servo Controller COOP
Post by: paul58 on November 25, 2011,: Hello;
Item 1 (2)
Item 3 (1)
Thanks.
Title: Re: DMX Tester and DMX Servo Controller COOP
Post by: Caliente Christmas on November 25, 2011,: 1 Kit - DMX Servo Controller

2 Kit - Bare DMX Servo Controller PCB

1 Kit - Bare DMX tester PCB
Title: Re: DMX Tester and DMX Servo Controller COOP
Post by: CJ on November 25, 2011,: Please sign me up for:
Kit #1 - 2
Kit #2 - 4
Kit #3 - 1
Kit #4 - 2

Thanks Curtis J
Title: Re: DMX Tester and DMX Servo Controller COOP
Post by: RJ on November 25, 2011,: Item #1 - qty 1
Item #3 - qty 1

RJ
Title: Re: DMX Tester and DMX Servo Controller COOP
Post by: Kainsel on November 25, 2011,: Hi,

2 of Item 1
2 of Item 2
1 of item 3

Thanks!
Title: Re: DMX Tester and DMX Servo Controller COOP
Post by: jess_her on November 25, 2011,: hello Mike

Item 2 --- 4
Item 3 --- 1
Item 4 --- 2
THX for doing this...

Jess
Title: Re: DMX Tester and DMX Servo Controller COOP
Post by: RobertM on November 25, 2011,: Hello all.

I would like-
Item 1 - 2
Item 2 - 1

Thank You.
Title: Re: DMX Tester and DMX Servo Controller COOP
Post by: Donny M. Carter on November 25, 2011,: I would like:

1 Item#3 please!

Thanks for the hard work!
Donny
Title: Re: DMX Tester and DMX Servo Controller COOP
Post by: pHoZfoRus on November 25, 2011,: Item #1 - qty 2
Item #2 - qty 4
Item #3 - qty 1
Item #4 - qty 1

Thanks in advance.

Russell
Title: Re: DMX Tester and DMX Servo Controller COOP
Post by: gophergrove on November 25, 2011,: Item #2 - qty 3
Item #3 - qty 1

Thanks!
Title: Re: DMX Tester and DMX Servo Controller COOP
Post by: dmoore on November 25, 2011,: Quantity 1 of Item #3 (DMX Tester Complete)

Thanks!!
Title: Re: DMX Tester and DMX Servo Controller COOP
Post by: galgon on November 25, 2011,: Item #3 - qty 1

Thank You!
Title: Re: DMX Tester and DMX Servo Controller COOP
Post by: TAdamsOK on November 25, 2011,: Not sure exactly what I woud do with the servo controller, but I guess that is what that imagination is for.

Put me down for:

Item 1: qty 1
Item 3: qty 1
Title: Re: DMX Tester and DMX Servo Controller COOP
Post by: kj77rn on November 25, 2011,: Item #2 - 1
Item #3 - 1
Title: Re: DMX Tester and DMX Servo Controller COOP
Post by: emcee on November 25, 2011,: Sent from my SPH-D700 using Tapatalk
Title: Re: DMX Tester and DMX Servo Controller COOP
Post by: emcee on November 25, 2011,: 1 - #1 servo controller
1-#3 DMX tester

Thanks.

Mike

Sent from my SPH-D700 using Tapatalk
Title: Re: DMX Tester and DMX Servo Controller COOP
Post by: egenoup on November 25, 2011,: Let me have:

two of item 1 DMX Servo Controller
two of item 2 Bare DMX Servo Controller PCB

Thanks
Title: Re: DMX Tester and DMX Servo Controller COOP
Post by: travailen on November 25, 2011,: Thanks for offering the coop. I would like:

3ea Item 1 2ea Item 3

Thanks,

Rick S
Title: Re: DMX Tester and DMX Servo Controller COOP
Post by: maffeirw on November 25, 2011,: I have a quartet of 3 axis skulls that have been just waiting silently for this.;D
Please put me down for:

6 of Item 1 - DMX Servo Controller
6 of Item 2 - Bare DMX Servo Controller PCB
1 of Item 3 - DMX Tester
1 of Item 4 - Bare DMX tester PCB

Thank you for running this coop!
Title: Re: DMX Tester and DMX Servo Controller COOP
Post by: Al on November 25, 2011,: 1 - Item 3 - DMX Tester

please
Al
Title: Re: DMX Tester and DMX Servo Controller COOP
Post by: tbone321 on November 25, 2011,: Please put me in for one kit # 3
Title: Re: DMX Tester and DMX Servo Controller COOP
Post by: comporder1 on November 25, 2011,: I'll take one kit # 3

Thanks guys!

Carey
Title: Re: DMX Tester and DMX Servo Controller COOP
Post by: mmciver on November 26, 2011,: PLease put me down for 1 Item 3. The DMX tester.

Thank you,

MIke
Title: Re: DMX Tester and DMX Servo Controller COOP
Post by: tlh on November 26, 2011,: Many thanks for the creations and COOP. I'm in for:

Kit #1 - Two (2)
Kit #3 - Two (2)

tlh/Terry
Title: Re: DMX Tester and DMX Servo Controller COOP
Post by: OkieJay on November 26, 2011,: Please put me down for:

1 of item #1

2 of item #2

1 of item #3

2 of item #4

Thank you,
OkieJay
Title: Re: DMX Tester and DMX Servo Controller COOP
Post by: wjgiles50 on November 26, 2011,: Please put me down for 3 of item #1.
Title: Re: DMX Tester and DMX Servo Controller COOP
Post by: wftxlites on November 26, 2011,: Please ADD to my order:

1 ea #3
2 ea #4

Thanks
Greg
Title: Re: DMX Tester and DMX Servo Controller COOP
Post by: dcwehw99 on November 26, 2011,: 1-#3 DMX tester
Title: Re: DMX Tester and DMX Servo Controller COOP
Post by: n1ist on November 26, 2011,: Just a warning - we are about $500 away from hitting the $5K coop limit, so if you are thinking of ordering, please do so soon...

/mike
Title: Re: DMX Tester and DMX Servo Controller COOP
Post by: NeverBRich on November 26, 2011,: Can you please put me down for

4 of Item #1 controller Kit
2 of Item #2 PCB Board

Thanks Tim
Title: Re: DMX Tester and DMX Servo Controller COOP
Post by: bisquit476 on November 26, 2011,: Hi Mike,
Please add my order for

2 of item 3
4 of item 4

Thanks,
Bill
Title: Re: DMX Tester and DMX Servo Controller COOP
Post by: FireMedic4Christ on November 27, 2011,: I will take:

1 item 3
1 item 4

Thanks,
Brian
Title: Re: DMX Tester and DMX Servo Controller COOP
Post by: CW on November 27, 2011,: I would like 1 of item 1 and 1 of item 3.
Thanks,

Craig
Title: Re: DMX Tester and DMX Servo Controller COOP
Post by: spud_uk on November 27, 2011,: Id like to get some of these

item 1 = qty 1
item 2 = qty 2
item 3 = qty 0
item 4 = qty 0

thanks
Title: Re: DMX Tester and DMX Servo Controller COOP
Post by: mokeefe on November 27, 2011,: Item #1: Qty 2
Item #2: Qty 2
Item #3: Qty 2

Thanks.

-Mike
Title: Re: DMX Tester and DMX Servo Controller COOP
Post by: snething on November 27, 2011,: Please sign me up for:

Item #1 = qty 1
Item #2 = qty 2
Item #3 = qty 1
Item #4 = qty 1

Thanks,
Scot
Title: Re: DMX Tester and DMX Servo Controller COOP
Post by: batdive on November 27, 2011,: 1 of Item #3 (DMX Tester Kit)

Thanks in advance,

JS
Title: Re: DMX Tester and DMX Servo Controller COOP
Post by: tbone321 on November 27, 2011,: Please add 1 of item # 2 to my order making it 1 item #2 and 1 item #3.
Thank you.
Title: Re: DMX Tester and DMX Servo Controller COOP
Post by: Justtazz on November 27, 2011,: I will take 1 of item #3 DMX Tester.

Thanks Justin
Title: Re: DMX Tester and DMX Servo Controller COOP
Post by: bisquit476 on November 27, 2011,: Hi Mike,

I need to modify my order to the following

1 of item 3
2 of item 4

Thanks,
Bill
Title: Re: DMX Tester and DMX Servo Controller COOP
Post by: comporder1 on November 27, 2011,: I need to increase my order

from 1 of kit #3

to

2 of kit #3

Thanks again!
Carey
Title: Re: DMX Tester and DMX Servo Controller COOP
Post by: MrChristmas2000 on November 27, 2011,: I will take

QTY 2 - Item 1 - DMX Servo Controller
QTY 1 - Item 3 - DMX Tester

Thanks,

Tom
Title: Re: DMX Tester and DMX Servo Controller COOP
Post by: tpctech on November 27, 2011,: Thanks for doing the Coop.

I will take
Qty 2 of item #1 complete servo kit
Qty 2 of Item #3 complete DMX tester kit

Thanks

KEN
Title: Re: DMX Tester and DMX Servo Controller COOP
Post by: IMustangI on November 27, 2011,: I'm in for

3 of item 2
1 of item 3
1 of item 4

Thanks
Title: Re: DMX Tester and DMX Servo Controller COOP
Post by: kgustafson on November 27, 2011,: 2 x ITEM 1
2 X ITEM 3

Much thanks!

Kurt
Title: Re: DMX Tester and DMX Servo Controller COOP
Post by: Sparky96 on November 27, 2011,: I'll take
1 of kit 1
4 of kit 2
1 of kit 3

Sparky96
Title: Re: DMX Tester and DMX Servo Controller COOP
Post by: Michael Munch on November 27, 2011,: Put me in for:

5 of Item 1 - (DMX Servo Controller)

1 of Item 3 - (DMX Tester)
Title: Re: DMX Tester and DMX Servo Controller COOP
Post by: jramirex on November 28, 2011,: item 1 -- 2 qty
item 2 1
item 3 1
item 4 1

thank you

Sent from my SPH-D710 using Tapatalk
Title: Re: DMX Tester and DMX Servo Controller COOP
Post by: lightsup on November 28, 2011,: Hi I will take
2 of item 2 board only
1 of item 4 board only
Thank you.
Title: Re: DMX Tester and DMX Servo Controller COOP
Post by: nick on November 28, 2011,: I would like:

1 of item 1
1 of item 3

Thanks
Title: Re: DMX Tester and DMX Servo Controller COOP
Post by: shaunkad on November 28, 2011,: I would like to add three 3 more of kit 2 for a total of
kit1 1
kit2 5
kit3 1
kit4 2

I am post number 8

Thank you
Title: Re: DMX Tester and DMX Servo Controller COOP
Post by: n1ist on November 28, 2011,: We have hit the $5000 mark for this coop, so it is now closed. I will update the counts in the second post this evening and then work on getting the total amounts so I can send out payment notices.

Thanks to all who have participated. I now need to clean off the dining room table in preparation for the onslaught of boxes... I have already ordered shipping boxes from the post office and anti-static foam for packing the chips.

/mike
Title: Re: DMX Tester and DMX Servo Controller COOP [CLOSED for orders]
Post by: n1ist on November 28, 2011,: Please review the counts in post #2 and let me know if I got anything wrong.
/mike
Title: Re: DMX Tester and DMX Servo Controller COOP [CLOSED for orders]
Post by: egenoup on November 28, 2011,: Mike,

My totals are wrong... two each of item 1 and 2...
Title: Re: DMX Tester and DMX Servo Controller COOP [CLOSED for orders]
Post by: n1ist on November 30, 2011,: Final pricing is in.
Item 1 (Servo kit) $16.53
Item 2 (Servo PCB) $1.34
Item 3 (Tester kit) $26.12
Item 4 (Tester PCB) $1.79

I have updated the second posts with the totals. Please add $5.30 for postage ($11.13 if you ordered two tester kits) to that total. If you are not in the US, please pay the total shown and I will send a separate PM for postage when I ship it.

My paypal address is n1ist@arrl.net

Please MAKE SURE you put your DIYC username in the Paypal comments so I know who is who.

Thanks.
/mike
Title: Re: DMX Tester and DMX Servo Controller COOP [CLOSED for orders]
Post by: twwaters on November 30, 2011,: Payment sent. Thanks Mike!
Title: Re: DMX Tester and DMX Servo Controller COOP [CLOSED for orders]
Post by: JerryPlak on December 01, 2011,: Thanks Mike, Payment sent!
Title: Re: DMX Tester and DMX Servo Controller COOP [CLOSED for orders]
Post by: wwwgator on December 01, 2011,: Thank you Mike, Payment sent 11-30-11
Title: Re: DMX Tester and DMX Servo Controller COOP [CLOSED for orders]
Post by: Rod R on December 01, 2011,: Thanks for the heads up Mike, payment sent.
Title: Re: DMX Tester and DMX Servo Controller COOP [CLOSED for orders]
Post by: rimist on December 01, 2011,: Thank you Mike! Payment sent.
Title: Re: DMX Tester and DMX Servo Controller COOP [CLOSED for orders]
Post by: RickeyS on December 01, 2011,: Mike,

Are palpay fees included in the amount due?

Thanks
RickeyS
Title: Re: DMX Tester and DMX Servo Controller COOP [CLOSED for orders]
Post by: n1ist on December 01, 2011,: Yes, the paypal and coop fees are included in the totals in post 2.
/mike
Title: Re: DMX Tester and DMX Servo Controller COOP [CLOSED for orders]
Post by: NeverBRich on December 01, 2011,: Mike,

Payment sent. 12/01/11.
Thanks for the coop.
Let me know about the shipping.

Thanks
Tim
Title: Re: DMX Tester and DMX Servo Controller COOP [CLOSED for orders]
Post by: ducker.richard on December 01, 2011,: Mike,

Payment sent today (01/12/2011).
Let me know about shipping costs.

Thanks very much

Richard
Title: Re: DMX Tester and DMX Servo Controller COOP [CLOSED for orders]
Post by: bisquit476 on December 01, 2011,: Those of you asking about shipping, please see post #114 for shipping info.
Title: Re: DMX Tester and DMX Servo Controller COOP [CLOSED for orders]
Post by: mmciver on December 01, 2011,: Mike,

Sent payment this morning 12/1/2011.

Thank you for running the coop!

Mike.
Title: Re: DMX Tester and DMX Servo Controller COOP [CLOSED for orders]
Post by: holland lights on December 01, 2011,: Payment sent
Title: Re: DMX Tester and DMX Servo Controller COOP [CLOSED for orders]
Post by: trekster on December 01, 2011,: Is it required to post after you pay? Or will receiving the paypal "You Got Money" be sufficient?

Ron

But I do want to say.............................

Thank you very much for doing the coop. I appreciate it very much!

Ron
Title: Re: DMX Tester and DMX Servo Controller COOP [CLOSED for orders]
Post by: inzeos on December 01, 2011,: You are not allowed to view links. Register or Login
Final pricing is in.
Item 1 (Servo kit) $16.53
Item 2 (Servo PCB) $1.34
Item 3 (Tester kit) $26.12
Item 4 (Tester PCB) $1.79

I have updated the second posts with the totals. Please add $5.30 for postage ($11.13 if you ordered two tester kits) to that total. If you are not in the US, please pay the total shown and I will send a separate PM for postage when I ship it.

My paypal address is n1ist@arrl.net

Please MAKE SURE you put your DIYC username in the Paypal comments so I know who is who.

Thanks.
/mike

Mike,

Every other coop I have been in has sent out PM messages to users requesting payment. Not everyone will have subscribed to this thread or be religious about reading the site. You may want to consider sending the same message you posted to the thread to all individuals.

I'm away for the weekend and will send you Payment on Monday when I'm back on a device that I feel comfortable using my PayPal account from.

Regards,

Leif
Title: Re: DMX Tester and DMX Servo Controller COOP [CLOSED for orders]
Post by: Freebird on December 01, 2011,: Paypal sent. Thanks for running this coop and al the hard work it took. Plus all your time to do it. Its very appreciateive by all of us.

Freebird
Title: Re: DMX Tester and DMX Servo Controller COOP [CLOSED for orders]
Post by: mokeefe on December 01, 2011,: I agree with Leif, I was expecting a PM with payment info. I just happened to check in on this thread and saw your notice about paying. I guess in the end you can always PM the smaller list of users who haven't made payments.

Payment sent. Thanks for running this coop.

-Mike
Title: Re: DMX Tester and DMX Servo Controller COOP [CLOSED for orders]
Post by: wftxlites on December 01, 2011,: Paypal Sent

Thanks,

Greg
Title: Re: DMX Tester and DMX Servo Controller COOP [CLOSED for orders]
Post by: n1ist on December 01, 2011,: No need to post here when you pay; I am getting the paypal notices. I will be updating the second post with payment status; if it has been a day or so since you payed and it hasn't shown up in that post, drop me a PM and I will look into it.

As for PMs, I was trying to reduce the number that I had to send out. I just sent them to everyone who hasn't payed yet, so that should get everyone.

/mike

PS. Steven Hooks, please let me know your DIYC username; you didn't include it in your payment.
Title: Re: DMX Tester and DMX Servo Controller COOP [CLOSED for orders]
Post by: wbuehler on December 03, 2011,: Guess What.

I just made my payment.

Sorry I could not resist.

Bill
Title: Re: DMX Tester and DMX Servo Controller COOP [CLOSED for orders]
Post by: n1ist on December 03, 2011,: 24 people left to pay. Please get your payments in shortly so I can start ordering stuff.
/mike
Title: Re: DMX Tester and DMX Servo Controller COOP [CLOSED for orders]
Post by: n1ist on December 05, 2011,: 12 left to pay.

PCBs have been ordered.
/mike
Title: Re: DMX Tester and DMX Servo Controller COOP [CLOSED for orders]
Post by: shaunkad on December 05, 2011,: will pay tomorrow
Title: Re: DMX Tester and DMX Servo Controller COOP [CLOSED for orders]
Post by: FireMedic4Christ on December 05, 2011,: paypal shows my payment was completed on Dec 1. Please let me know if you did not receive it on your end and I will look into it.

Brian

You are not allowed to view links. Register or Login
12 left to pay.

PCBs have been ordered.
/mike
Title: Re: DMX Tester and DMX Servo Controller COOP [CLOSED for orders]
Post by: inzeos on December 06, 2011,: Back home late last night. Payment just sent over now.
Title: Re: DMX Tester and DMX Servo Controller COOP [CLOSED for orders]
Post by: n1ist on December 06, 2011,: Since there are only two left who haven't spoken to me, I went ahead and placed an orders with Mouser, Digikey, and Element14. Can't wait to see the credit card bill this month :-) One last order to Microchip for some PICs and everything will have been ordered.

The anti-static foam for shipping the ICs and the medium USPS boxes arrived today.

/mike
Title: Re: DMX Tester and DMX Servo Controller COOP [CLOSED for orders]
Post by: trekster on December 06, 2011,: You know mike..... you are kind of like Santa.......

Thank you so much for taking time at the busiest time of the year for a blinky guy to help us out with our toys.

Ron
Title: Re: DMX Tester and DMX Servo Controller COOP [CLOSED for orders]
Post by: n1ist on December 07, 2011,: PICs have been ordered, and the rest of the USPS boxes are here.
/mike
Title: Re: DMX Tester and DMX Servo Controller COOP [CLOSED for orders]
Post by: n1ist on December 10, 2011,: I have received a big box from Mouser and a bigger one (cases) from Digikey.
/mike
Title: Re: DMX Tester and DMX Servo Controller COOP [CLOSED for orders]
Post by: Rod R on December 10, 2011,: Thanks for the update.
Title: Re: DMX Tester and DMX Servo Controller COOP [CLOSED for orders]
Post by: n1ist on December 15, 2011,: All parts are here except PCBs (they are about 2 weeks or so out depending on shipping time). Now to start sorting.
/mike
Title: Re: DMX Tester and DMX Servo Controller COOP [CLOSED for orders]
Post by: n1ist on December 20, 2011,: Weekly update:
- I have started sorting parts
- Boards have been fabbed; I still haven't received a tracking number yet from the board house.
/mike
Title: Re: DMX Tester and DMX Servo Controller COOP [CLOSED for orders]
Post by: n1ist on December 26, 2011,: Weekly update:
- boards have arrived
- Tester non-static-sensitive parts have been sorted
- Servo non-static-sensitive parts have been half-sorted
- I got a part number wrong for some of the encoders, so I will have to get them replaced with the right parts; I will call Mouser tomorrow to straighten that out.
- I should get the servo non-esd parts done tomorrow so I can start on the esd bags.
/mike
Title: Re: DMX Tester and DMX Servo Controller COOP [CLOSED for orders]
Post by: n1ist on December 27, 2011,: I should have the correct encoders by Friday. Also, the servo non-sensitive parts have been sorted.
/mike
Title: Re: DMX Tester and DMX Servo Controller COOP [CLOSED for orders]
Post by: dlhoppe on January 02, 2012,: Great work Mike! Thanks for all your efforts!
Title: Re: DMX Tester and DMX Servo Controller COOP [CLOSED for orders]
Post by: kgustafson on January 04, 2012,: Thanks Mike for doing this! I can't wait for my second Christmas! *smile*
Title: Re: DMX Tester and DMX Servo Controller COOP [CLOSED for orders]
Post by: egenoup on January 04, 2012,: <res. Thanks Mike for doing this COOP.... <wd..
Title: Re: DMX Tester and DMX Servo Controller COOP [CLOSED for orders]
Post by: chrisatpsu on January 05, 2012,: Thanks for your hard work, Mike
Title: Re: DMX Tester and DMX Servo Controller COOP [CLOSED for orders]
Post by: inzeos on January 13, 2012,: Been a while since the last update.

Any status changes?
Title: Re: DMX Tester and DMX Servo Controller COOP [CLOSED for orders]
Post by: n1ist on January 13, 2012,: I got tied up with the kid's Nutcracker production (lighting and making props).
The tester static sensitive parts have been sorted. The correct encoders have arrived. I'm hoping to get a bunch done this weekend.
/mike
Title: Re: DMX Tester and DMX Servo Controller COOP [CLOSED for orders]
Post by: wwwgator on January 13, 2012,: Thanks for the updates.....and for all your work .... ;)
Title: Re: DMX Tester and DMX Servo Controller COOP [CLOSED for orders]
Post by: n1ist on January 19, 2012,: All of the servo kits have been kitted into their final bags. I'd guess another 2-3 long evenings to finish kitting the testers.

Anyone who only ordered servo kits or blank PCBs in the US will have theirs ship tomorrow. DX ones will have to wait until I can make a trip to the post office to fill out the paperwork.

/mike
Title: Re: DMX Tester and DMX Servo Controller COOP [CLOSED for orders]
Post by: kgustafson on January 20, 2012,: n1ist,

Thanks again for all the work on the COOP! Family is definitely first!

Kurt
Title: Re: DMX Tester and DMX Servo Controller COOP [CLOSED for orders]
Post by: RickeyS on January 24, 2012,: Got my Servo kit and spare PCB yesterday,

Thanks,

RickeyS
Title: Re: DMX Tester and DMX Servo Controller COOP [CLOSED for orders]
Post by: rimist on January 24, 2012,: I received my two kits and pcb yesterday. Thanks!

-Rimist (via Tapatalk)
Title: Re: DMX Tester and DMX Servo Controller COOP [CLOSED for orders]
Post by: egenoup on January 24, 2012,: Got my package yesterday... Thanks for all the hard work!
Title: Re: DMX Tester and DMX Servo Controller COOP [CLOSED for orders]
Post by: MrChristmas2000 on January 24, 2012,: When was the packages shipped?

Where are they coming from?
Title: Re: DMX Tester and DMX Servo Controller COOP [CLOSED for orders]
Post by: Rod R on January 24, 2012,: You are not allowed to view links. Register or Login
When was the packages shipped?

Where are they coming from?

You can check your paypal account to track your shipment to see if it went out already. I think Mike shipped all the DMX servo board only orders first. He was still finishing up on the DMX tester portion of the coop as per his last update. I have both on order he'll get thru them all no worries.
Title: Re: DMX Tester and DMX Servo Controller COOP [CLOSED for orders]
Post by: holland lights on January 24, 2012,: Got my servo pcb today.
Title: Re: DMX Tester and DMX Servo Controller COOP [CLOSED for orders]
Post by: n1ist on January 24, 2012,: So far, I have only sent out packages to people who only ordered servo kits and/or blank boards. I am still finishing up packing the tester kits (busy cutting shipping rails for the IC sockets right now...)

They ship either from Danvers MA (work) or Malden MA (home), depending on which post office I drop them off at.
/mike
Title: Re: DMX Tester and DMX Servo Controller COOP [CLOSED for orders]
Post by: MrChristmas2000 on January 24, 2012,: Just curious. Appreciate the status. <pop..<;d <;d <;d
Title: Re: DMX Tester and DMX Servo Controller COOP [CLOSED for orders]
Post by: RJ on January 24, 2012,: Thanks for all the work Mike!

Good Job!

RJ
Title: Re: DMX Tester and DMX Servo Controller COOP [CLOSED for orders]
Post by: kgustafson on January 24, 2012,: Echoed. Great job Mike. Appreciate all the hard work!

This has been a very smoothly run COOP!
Title: DMX Tester and DMX Servo Controller COOP [CLOSED for orders]
Post by: tmcteer on January 28, 2012,: Still waiting for servo kits. I'm in So Calif.

Tom
Title: Re: DMX Tester and DMX Servo Controller COOP [CLOSED for orders]
Post by: chrisatpsu on January 28, 2012,: he's only shipped the items for people who ONLY wanted the servo related items.
Title: Re: DMX Tester and DMX Servo Controller COOP [CLOSED for orders]
Post by: n1ist on January 28, 2012,: The tester kits have all been bagged; now to print labels and pack boxes. The end is in sight..

/mike
Title: Re: DMX Tester and DMX Servo Controller COOP [CLOSED for orders]
Post by: chrisatpsu on January 28, 2012,: when the last box goes, don't forget to sit down and let out a sigh...
Title: Re: DMX Tester and DMX Servo Controller COOP [CLOSED for orders]
Post by: RJ on January 29, 2012,: Awesome Job!!!

RJ
Title: Re: DMX Tester and DMX Servo Controller COOP [CLOSED for orders]
Post by: wbuehler on January 30, 2012,: Awesome

Thanks

Bill
Title: Re: DMX Tester and DMX Servo Controller COOP [CLOSED for orders]
Post by: Rod R on January 30, 2012,: Mike

Thanks for the heads up and the hard work.

Rod
Title: Re: DMX Tester and DMX Servo Controller COOP [CLOSED for orders]
Post by: n1ist on February 01, 2012,: 8 more packages went out today; I'm packing the next batch of 10 for tomorrow right now.

Some of the boxes are a bit stuffed, so I had to open the packaging on the enclosure for the tester and put the parts bag inside.

/mike
Title: Re: DMX Tester and DMX Servo Controller COOP [CLOSED for orders]
Post by: wwwgator on February 01, 2012,: perfect timing !!!
My soldering wounds have just about healed from my last project...ready for more smoke !!!

Thanks again for all Co-Op managers.....feeding into our addictions.....Mucho Gracias!!
Title: Re: DMX Tester and DMX Servo Controller COOP [CLOSED for orders]
Post by: mr2hogs on February 03, 2012,: Recieved my today ...

Thanks again for running the coop Mike.

Now back to my man cave.
Title: Re: DMX Tester and DMX Servo Controller COOP [CLOSED for orders]
Post by: PJNMCT on February 04, 2012,: Thanks Mike for running a great coop at a very hectic time. Much appreciated.

-Paul
Title: Re: DMX Tester and DMX Servo Controller COOP [CLOSED for orders]
Post by: gforman on February 04, 2012,: They arrived today

thanks againg for running this

Glen
Title: DMX Tester and DMX Servo Controller COOP [CLOSED for orders]
Post by: crazybob on February 04, 2012,: Got mine today. Thank you!

Sent from my iPad using Tapatalk HD
Title: Re: DMX Tester and DMX Servo Controller COOP [CLOSED for orders]
Post by: n1ist on February 05, 2012,: Another batch has been packed and will go out tomorrow.
/mike
Title: Re: DMX Tester and DMX Servo Controller COOP [CLOSED for orders]
Post by: chrisatpsu on February 05, 2012,: got mine and assembled. thanks! all I have to do if cut through the case and print on a piece of plastic to cover the face of the case
Title: Re: DMX Tester and DMX Servo Controller COOP [CLOSED for orders]
Post by: n1ist on February 06, 2012,: And another batch is packed for tomorrow.

OK, I screwed up (literally...) I forgot to include the screws for the tester that are used to mount the PCB in some of the kits. You can use 4-40 screws, either 3/16" or 1/4" long if you have them, or PM me if you need some sent out. All of the kits sent out starting today have the screws.

/mike
Title: Re: DMX Tester and DMX Servo Controller COOP [CLOSED for orders]
Post by: wwwgator on February 07, 2012,: recieved my kits and boards......just in time for my birthday !!!! Thanks
Title: Re: DMX Tester and DMX Servo Controller COOP [CLOSED for orders]
Post by: tmcteer on February 08, 2012,: Received mine today from MA to CA in 1 day... Great service from the USPS when UPS is not involved......

Thanks Mike...
Title: Re: DMX Tester and DMX Servo Controller COOP [CLOSED for orders]
Post by: trekster on February 09, 2012,: Mine made it to Oklahoma on Wednesday the 8th. Thank you so much. I appreciate you doing the coop!

Ron
Title: Re: DMX Tester and DMX Servo Controller COOP [CLOSED for orders]
Post by: caretaker on February 09, 2012,: Got mine on the 8th! Thanks again for doing the coop!
Title: Re: DMX Tester and DMX Servo Controller COOP [CLOSED for orders]
Post by: n1ist on February 09, 2012,: And another 14 boxes packed to be mailed in the morning.
/mike
Title: Re: DMX Tester and DMX Servo Controller COOP [CLOSED for orders]
Post by: MrChristmas2000 on February 10, 2012,: How many are left and who is left to go?
Title: Re: DMX Tester and DMX Servo Controller COOP [CLOSED for orders]
Post by: n1ist on February 10, 2012,: Check the second post; I update the list when I print out a batch of labels. I hope to finish up this weekend, sending out the rest of the small boxes on Monday and taking a trip to the post office for the larger boxes and ones going outside the US on Tuesday.
/mike
Title: DMX Tester and DMX Servo Controller COOP [CLOSED for orders]
Post by: JDM1oc on February 10, 2012,: Thanks for doing this Mike! Received mine in California yesterday.

Josh
Title: Re: DMX Tester and DMX Servo Controller COOP [CLOSED for orders]
Post by: RJ on February 10, 2012,: Received mine, Thanks Mike!

RJ
Title: Re: DMX Tester and DMX Servo Controller COOP [CLOSED for orders]
Post by: JoeFromOzarks on February 10, 2012,: Received my batch! Thank you very much for all the hard work!!!

Solder time!! :) joe
Title: DMX Tester and DMX Servo Controller COOP [CLOSED for orders]
Post by: rm357 on February 11, 2012,: In my excitement, I soldered the switches to the wrong side of the board. After destroying one, I found an easy way to remove the second. Turn the iron all the way up and make a giant solder puddle that touches all of the pins. The switch will literally fall out of the board. Then you just have to clean up the mess...

N1ist - if you have any extra mode switches, please pm me the cost to stick one in an envelope.
If not, I'll just have to start looking at my next mouser order...
Thanks!!!!
RM357
Title: Re: DMX Tester and DMX Servo Controller COOP [CLOSED for orders]
Post by: OkieJay on February 13, 2012,: Got mine today.
Thank you for your hard work.

OkieJay
Title: Re: DMX Tester and DMX Servo Controller COOP [CLOSED for orders]
Post by: n1ist on February 13, 2012,: Unfortunately, Paypal shipping has been down since Saturday, so I haven't been able to process shipments. I hope it comes back shortly.
/mike

RM357 - I don't have any extra switches. Sorry.
Title: Re: DMX Tester and DMX Servo Controller COOP [CLOSED for orders]
Post by: emcee on February 13, 2012,: Mine arrived today!

Thanks for yor efforts putting on the coop.

Mike

Sent from my SPH-D700 using Tapatalk
Title: Re: DMX Tester and DMX Servo Controller COOP [CLOSED for orders]
Post by: jess_her on February 15, 2012,: Got my dmx tester yesterday and built it this morning,
Thanks Mike for the Coop and Both Mike and Dave for the tester.
I'm going to keep this at the top of my tool box, going to be very handy.
Jess
Title: Re: DMX Tester and DMX Servo Controller COOP [CLOSED for orders]
Post by: MrChristmas2000 on February 15, 2012,: You are not allowed to view links. Register or Login
Unfortunately, Paypal shipping has been down since Saturday, so I haven't been able to process shipments. I hope it comes back shortly.
/mike

RM357 - I don't have any extra switches. Sorry.

Did Paypal shipping come back online?

Looking forward to getting mine. <;d
Title: Re: DMX Tester and DMX Servo Controller COOP [CLOSED for orders]
Post by: Pete on February 15, 2012,: Got mine - thank you!!!

Pete
Title: Re: DMX Tester and DMX Servo Controller COOP [CLOSED for orders]
Post by: tbone321 on February 15, 2012,: Mine showed up on Monday. It didn't make it in time for my birthday but it's here now and that's what realy matters. Thanks for doing the work for us.
Title: Re: DMX Tester and DMX Servo Controller COOP [CLOSED for orders]
Post by: wwwgator on February 15, 2012,: I have attained LEGEND status at work..... ;D

After corrupting 4 new Addicts of blinky flashy, I sold one of my LE's to a buddy, who after completing his first soldering job wanted to test it. I pulled out the tester and explained to him how it all works and was able to show the channel and data for the DMX signal. When his parts kit for the dongle arrive, he should be off and running.......

This is a great test tool and proud to say I built it my self....with a lot of help from you guys !!!!! <res.
Title: Re: DMX Tester and DMX Servo Controller COOP [CLOSED for orders]
Post by: n1ist on February 16, 2012,: Paypal shipping is back (sort of, I have gotten a few "unavailable" errors today); I have printed out the next batch of shipping labels so they will go out in the morning.
/mike
Title: Re: DMX Tester and DMX Servo Controller COOP [CLOSED for orders]
Post by: maffeirw on February 16, 2012,: The "guys" waiting with bated breath in silent anticipation.

The guys say thanks for doing this and they can't wait to say it to you themselves.
Title: Re: DMX Tester and DMX Servo Controller COOP [CLOSED for orders]
Post by: rm357 on February 16, 2012,: I ordered a replacement for the switch I buggered up today.
Thanks for doing the coop. I really appreciate all the effort that goes into these things.
Do you have nightmares about counting parts...
sooo many parts...

Thanks!!
RM
Title: Re: DMX Tester and DMX Servo Controller COOP [CLOSED for orders]
Post by: mmciver on February 17, 2012,: MIne arrived this week.

I have it soldered together, but now have to cut the case and add the wireless card!

I am good with everything but cutting the case:) I am taking this part very slow!!!

Thanks for all the work on the board and the COOP.

MIke.
Title: Re: DMX Tester and DMX Servo Controller COOP [CLOSED for orders]
Post by: JonB256 on February 20, 2012,: still waiting :(

I suppose I'll turn off the soldering station and wait semi-patiently.
Title: Re: DMX Tester and DMX Servo Controller COOP [CLOSED for orders]
Post by: MrChristmas2000 on February 21, 2012,: It Arrived!!!!

Heat up the soldering iron. Let's get smokin......

Thanks for running the coop.

I just bet I know someone that is glad to be finished with this one. :)
Title: DMX Tester and DMX Servo Controller COOP [CLOSED for orders]
Post by: tmcteer on February 21, 2012,: Mine arrived last week and built both. I used the DMX tester to run the servo board with one servo and 3 LEDs attached. Why would the LEDs flicker while dimming the last 10%?

Tom
Title: Re: DMX Tester and DMX Servo Controller COOP [CLOSED for orders]
Post by: lightguy on February 22, 2012,: Is the pic programmed in the coop?
Lightguy
Title: Re: DMX Tester and DMX Servo Controller COOP [CLOSED for orders]
Post by: MrChristmas2000 on February 22, 2012,: Not this coop.
Title: Re: DMX Tester and DMX Servo Controller COOP [CLOSED for orders]
Post by: lightguy on February 22, 2012,: That will be why it doesn't work then
:-\
Title: Re: DMX Tester and DMX Servo Controller COOP [CLOSED for orders]
Post by: n1ist on February 23, 2012,: With the exception on one that I am waiting for an address for, and the DX ones that I finally got customs forms to fill out, all other packages are on the way. 6 more and the coop will be done...
/mike
Title: Re: DMX Tester and DMX Servo Controller COOP [CLOSED for orders]
Post by: RJ on February 23, 2012,: Great Job Mike!

RJ
Title: Re: DMX Tester and DMX Servo Controller COOP [CLOSED for orders]
Post by: wbuehler on February 24, 2012,: Awesome Job

Bill
Title: Re: DMX Tester and DMX Servo Controller COOP [CLOSED for orders]
Post by: n1ist on February 24, 2012,: And the DX ones went out today (except for two waiting for addresses). I'll get PMs out to the people who owe shipping tomorrow.
/mike
Title: Re: DMX Tester and DMX Servo Controller COOP [CLOSED for orders]
Post by: tmcteer on February 24, 2012,: WOW unbelievable amount of hard work.... Thanks again helping the blinky blinky cause!!

Tom
Title: Re: DMX Tester and DMX Servo Controller COOP [CLOSED for orders]
Post by: Pete on February 25, 2012,: Fantastic Job!!!

Thanks for the time and work you did for all of us in the COOP.

Pete
Title: Re: DMX Tester and DMX Servo Controller COOP [CLOSED for orders]
Post by: MrChristmas2000 on February 26, 2012,: Tester assembled. Wish I would have had this last Christmas.

The case is a challenge but it went together smothly and works great. Perhaps in the future a stick on lable could be developed to cover the imperfections generated during cutting and drilling of the case. It would look really good to have the Lynx name and equipment name on it.
Title: DMX Tester and DMX Servo Controller COOP [CLOSED for orders]
Post by: rm357 on February 26, 2012,: Got the new switch from mouser, assembled, tested, added wireless module, this thing is great!!

Thanks,
RM
Title: Re: DMX Tester and DMX Servo Controller COOP [CLOSED for orders]
Post by: deplanche on February 27, 2012,: Package arrived today. I was nervous when i heard the parts moving around in there. Got it open to find I had a screw loose in the case (pun intended).

Nice work with the coop, and thank you!
Title: Re: DMX Tester and DMX Servo Controller COOP [CLOSED for orders]
Post by: n1ist on February 27, 2012,: Most will rattle as the battery contacts and screws for holding the tester case together are loose inside the case as it comes from Serpac. For orders with a tester and 2 or 3 servos, I opened the Serpac case, bagged the loose hardware, and put the tester kit parts bag inside the case. That made it possible to fit everything in the small flat rate box.
/mike
Title: Re: DMX Tester and DMX Servo Controller COOP [CLOSED for orders]
Post by: Rod R on February 27, 2012,: Mike,

Thanks again for the coop and the hard work. I got both the tester and the controller built. Tried out the tester and it works great wish I had this during the last seasons set-up would of make it a lot easier instead of lugging the lap top around the yard.
Title: Re: DMX Tester and DMX Servo Controller COOP [CLOSED for orders]
Post by: shaunkad on February 27, 2012,: Wow I did not realize I did not pay for shipping thank you for shipping anyway
Title: Re: DMX Tester and DMX Servo Controller COOP [CLOSED for orders]
Post by: wbuehler on February 27, 2012,: Got my parts last Friday.

Thanks for doing this.

Bill
Title: Re: DMX Tester and DMX Servo Controller COOP [CLOSED for orders]
Post by: mmciver on February 28, 2012,: Mike,

Thanks for all the hard work on this coop. I received my kit, soldered everything, cut the case without it looking too bad;) and ordered wireless parts for my wirelesss board.

Only issue I am having is with an apparent bad PIC chip. I have one on order and once it is here and flashed I will start using it.

Mike.
Title: Re: DMX Tester and DMX Servo Controller COOP [CLOSED for orders]
Post by: kgustafson on February 28, 2012,: Mike,

Got mine as well. Built my first (non-wireless) and it all works. I did have an issue where the barrel encoder was working intermittently. I looked at it and found that my big beefy fingers must of snapped one of the fine connectors on the encoder when manipulating it to fit in the enclosure. This thing has the tiniest of wires for connectors. Everyone be careful and not do the dumb thing I did! I also had to slightly angle the 6 pin connector for the PIC programmer to fit nicely on the pins -- but this was no big deal really.

Thanks again for the COOP and the great design.

Kurt
Title: Re: DMX Tester and DMX Servo Controller COOP [CLOSED for orders]
Post by: maffeirw on February 29, 2012,: I received everything and have completed 4 servo controllers. I'm using a Pickit 3 to program the PICs but I have been unable to do a verify without errors, still the controllers seem to be working fine even with the verify error. I still have a huge amount of work on the setup and tuning of the movements and I need to hookup the eyes but the "guys" insisted on talking to you now. ;D
http://vimeo.com/37682470
Title: Re: DMX Tester and DMX Servo Controller COOP [CLOSED for orders]
Post by: kgustafson on February 29, 2012,: maffeirw,

Nicely done!

Kurt
Title: Re: DMX Tester and DMX Servo Controller COOP [CLOSED for orders]
Post by: combustionmark on February 29, 2012,: DMX testers built and working. Servo controllers started. Good job.

Have Fun
Title: Re: DMX Tester and DMX Servo Controller COOP [CLOSED for orders]
Post by: n1ist on February 29, 2012,: Thanks too to Dave (dlhoppe) for the firmware and software side of this project...

Ron - thanks for the video; first time I have been thanked *by* a project :-)
/mike
Title: Re: DMX Tester and DMX Servo Controller COOP [CLOSED for orders]
Post by: wwwgator on February 29, 2012,: You are not allowed to view links. Register or Login
I received everything and have completed 4 servo controllers. I'm using a Pickit 3 to program the PICs but I have been unable to do a verify without errors, still the controllers seem to be working fine even with the verify error. I still have a huge amount of work on the setup and tuning of the movements and I need to hookup the eyes but the "guys" insisted on talking to you now. ;D
http://vimeo.com/37682470

I had the same issue. I PM'd mike and verified the check sum was told that the verify would come back as bad, but works anyway.
Title: Re: DMX Tester and DMX Servo Controller COOP [CLOSED for orders]
Post by: ducker.richard on April 10, 2012,: Arrived today, going to try and get started on assembly tomorrow.

Thanks very much for all your hard work!

Richard