DiyLightAnimation
Store => Finished COOPS => Topic started by: lineman on January 27, 2012,
-
Hello DLA Members,
This Co-Op is for the 16 Channel DC Controller Version 2 (MR16) kit.
*********************************************************************************
Please read this post completely before participating in this Co-Op.
This Co-Op is for Kits that will include the PCB with parts or parts only.
Kit #1 - 16 CH Controller PCB with parts. This kit includes the PCB and all parts needed to build the full controller.
Kit #2 - 16 CH Controller parts only. This kit is for parts only. (No PCB)
There will be no PCB only options in this Co-Op.
No kits will contain the Cases.
Controller information can be found here:
http://diylightanimation.com/index.php?topic=3175.MSG32205
http://diylightanimation.com/wiki/index.php?title=Equipment#Dimmers
*********************************************************************************
The Co-Op will be limited to 100 kits.
This Co-Op will close on February 29, 2012 at 8:00 PM Eastern Standard Time zone or when it fills its limit of 100 kits.
Full Payment is expected when the Co-Op is closed. All members will receive PMs or be directed by post with details on how to pay once the Co-Op closes.
Please get your PayPal payments in as soon as you get the Co-Op invoice PM as no orders can be placed until all payments have been received.
By joining this Co-Op you also agree that the Co-Op manager, DLA (as a board to also include all administrators, moderators, and members) shall not be held for any liability. You are joining this Co-Op at your own risk.
As with any Co-Op this Co-Op is subject to the forum rules. These rules can be reviewed using the following link.
Forum Co-Op rules
http://diylightanimation.com/index.php?topic=111.0
*********************************************************************************
Here is the pricing breakdown based on the initial quote from the vendor.
Pricing is in US Dollars and includes PayPal and Co-Op fees.
We have a base goal of 50 kits. This goal allows the cost per unit to drop low enough to make it cost effective to run the Co-Op. Below this number, we will not make the order.
Kit #1 16 CH Controller PCB With Parts.
Per Kit At Qty 50 - $43.51
Kit #2 16 CH Controller Parts ONLY
Per Kit At Qty 50 - $37.70
This is an estimate. As always higher numbers reduce pricing and lower numbers increase pricing.
Shipping will be by US Postal Service Priority Mail Flat Rate boxes. One to two kits should fit in a small box. Larger orders will require a medium box.
Shipping Charges: for the "Small" flat rate box. (In US Dollars)
Domestic: $5.35
Canada and Mexico: $12.45
All Others: $14.59
Shipping Charges: for the "Medium" flat rate box. (In US Dollars)
Domestic: $11.19
Canada and Mexico: $28.19
All Others: $45.45
If you wish to have insurance on your package it is your responsibility to choose the amount and look up the cost to add. You must add this to your PayPal payment and in the comments explain you paid for insurance and how much. We cannot be held responsible for your package once accepted at the post office and we have a receipt of shipment if it is not insured.
Post with the quantity of each kit you wish in this thread. Please do not post questions or your thoughts in the Co-Op thread. Start a new thread in the correct area for these. Co-Op threads are strictly for people requesting orders. If you later wish to change your quantity please post again clearly stating that this is an update to a previous order and how many you wish it to be now.
If you have any questions please post a new thread to help keep the Co-Op thread clean.
Thanks,
Jeff Gustafson
-
| member name | kit 1 qty | kit 2 qty | paid | shipped |
| cpnmnanamn | 2 | 0 | y | y |
| btdb1969 | 1 | 0 | y | y |
| kmcallorum | 1 | 4 | y | y |
| sabie | 1 | 0 | y | y |
| t.jo13 | 1 | 0 | y | y |
| gophergrove | 1 | 0 | y | y |
| pugs1501 | 1 | 1 | y | y |
| mmais68569 | 1 | 0 | y | y |
| elcommandante | 1 | 0 | y | y |
| jem5136 | 2 | 0 | y | y |
| christmas.joe | 2 | 0 | y | y |
| ozmin | 2 | 0 | y | y |
| cbell | 1 | 0 | y | y |
| inzeos | 0 | 0 | 0 |
| jess_her | 2 | 0 | y | y |
| shaunkad | 1 | 0 | y | y |
| mgholland | 1 | 0 | y | y |
| ron | 0 | 2 | y | y |
| stevemaris | 2 | 0 | y | y |
| mokeefe | 2 | 0 | y | y |
| rod r | 1 | 0 | y | y |
| lortiz | 0 | 2 | y | y |
| steve gase | 2 | 0 | y | y |
| pete | 1 | 0 | y | y |
| jramirex | 2 | 0 | y | y |
| alan s | 2 | 0 | y | y |
| bassmants | 1 | 0 | y | y |
| dpitts | 2 | 0 | y | y |
| smeighan | 1 | 0 | y | y |
| blaha | 1 | 0 | y | y |
| mike hill | 2 | 0 | y | y |
| easygo | 1 | 0 | y | y |
| texasstingray | 1 | 0 | y | y |
| rm357 | 0 | 2 | y | y |
| monkey | 2 | 0 | y | y |
| jstevens | 1 | 0 | y | y |
| kwajtony | 1 | 0 | y | y |
| originalhotrodder | 3 | 0 | y | y |
| mkozik1 | 1 | 0 | y | y |
| loveroflife96 | 1 | 0 | y | y |
| plaberge | 1 | 0 | y | y |
| edwinpeek | 1 | 0 | y | y |
| tmcteer | 2 | 0 | y | y |
| nightowlz1966 | 1 | 0 | y | y |
| cw | 2 | 0 | y | y |
| tlh | 1 | 0 | y | y |
| alwomack | 1 | 0 | y | y |
| kevr | 3 | 0 | y | y |
| exitfourxmas | 1 | 0 | y | y |
| twooly | 1 | 0 | y | y |
| dandyman | 1 | 0 | y | y |
| heinekenator | 3 | 0 | y | y |
| tennhillbilly | 1 | 0 | y | y |
| wildwillie | 1 | 0 | y | y |
| fertsy | 0 | 0 | 0 |
| kainsel | 1 | 0 | y | y |
| randyy | 1 | 0 | y | y |
| mimir | 2 | 0 | y | y |
| rogelio | 2 | 0 | y | y |
| golights | 1 | 0 | y | y |
| chrisatpsu | 0 | 1 | y | y |
| khague | 1 | 0 | y | y |
| royce | 2 | 0 | y | y |
| grumpy2076 | 2 | 0 | y | y |
| pwalstead | 2 | 0 | y | y |
| mickpat | 1 | 0 | y | y |
| TOTALS | 86 | 13 | |
-
I'm in for 1 please.
CORRECTION: Make it 2 - Kit #1. Gotta replace the one I blew up.
-
Please put me down for 1 -- #1 kit
thank you, Bill
-
I will take 4 kit #2 and 1 kit #1
Kevin
-
put me down for 1 kit #1
-
please put me down for 1 kit #1
-
Kit 1 - Qty 1
Thanks Jeff.
-
1 - kit1
1- kit2
Thanks
Adam
-
1--Kit #1
Thanks Mike
-
1 #1 please. Thank you!!
-
I'll take 2 #1 kits. Thanks!
Sent from my Inspire using Tapatalk.
-
I'd like 2 #1 Kits (PCB with parts) Please.
<pop..
-
I'll take 2 of Kit #1 please.
Thks - Bill A.
-
1 #1 please
-
In for qty 2 of kit #1
-
Hello
2 of Kit 1 please
Jess
-
1 of kit 1
Thank you
-
Kit 1 - Qty 1
Thanks
Glyn
-
Beware! Notifications are not working again. <pop..
-
Put me down for 2 of kit #2 (parts only) please.
Thanks.
Ron
-
2 full kits for me please.
-
I'd like
Qty: 2 of Kit #1 (full kit).
Thanks.
-Mike
-
2 full kits for me please.
I believe you are asking for 2 of the kit1 correct ?
-
Jeff,
Qty:1 of Kit #1
Thanks,
Rod
-
Hi,
Please add the following for me:
Kit #2 - Qty 2
Thanks,
Leo
-
Kit #1, Qty 2
Thanks!
Steve
-
1 please - KIT #1
-
2 of kit 1
Sent from my SPH-D710 using Tapatalk
-
I will take one(1) Kit#1
Thanks
-
Beware! Notifications are not working again. <pop..
I don't know if this will help, but I went into the Current Coop area and pressed the Unnotify, left the forum, left DLA then logged back in and back to the Current Coop section a pressed Notify.
I have been getting the notifications ever since.
Think of it as a Re-Boot.
<pop..
-
1 kit 1 please
-
2 of kit 1 please
-
qty 1 of Kit #1
thanks
sean
-
qty 1 of Kit #1
Thanks,
Brian
-
Qty 2 of kit number 1.
Thank you.
-
Qty. 1 of Kit #1, please.
Thanks,
Jon
-
Don't know what I'll use it for yet but put me down for 1 of Kit 1. Does this me I'm addicted?
Thanks
Scott
-
Would like 2 of kit 2 (parts only)
Thanks
RM357
-
sorry i guess it wont be good for me .. please remove
thanks
-
Thanks for doing this!
I will take 2 of the #1 kits please (the full kits PCB + Parts).
Thanks,
Mike
-
Oh, what the heck. It's only money.
Put me in for one kit #1 (PCB and BOM).
-
One of Kit #1 please. Thanks!
-
2 ea. of kit #1 please
-
about 61 so far...
-
1 kit 1 please.
Thanks for your efforts <la..
-
1 Kit 1 Please!
Thanks...Duane
-
1 Kit #1 please.
Thanks,
Paul.
-
1 #1 kit for me
-
2ea kit#1 for me
-
Please Put me Down for (2) of Kit #1
Thanks
Brian F
-
2 of kit 1 please.
Thanks,
Craig
-
One (1) Kit # 1, please.
Thank you,
tlh/Terry
Sent from my iPhone using Tapatalk
-
1 - Kit #1 - 16 CH Controller PCB with parts
-
Looks like 73 kits as of this morning...
-
3 - Kit #1 - 16 CH Controller PCB with parts
Thanks a lot!!
Kev :-)
-
Update - Please change me to Two(2) of the Kit #1.
Thank you
Alan
-
Please add me to the list for one kit #1
Thanks
Jerry
-
1 of kit #1 please
-
1 #1 kit for me...
Thanks !
-
2 please (edit to add kit #1)
-
1 of Kit #1 PCB and parts Please. Thanks for doing this co-op.
-
Please add 1 more #1 for me, totalling 3 #1s.
-
I'll take 1 of kit #1.
-
1kit one please
---
I am here: http://maps.google.com/maps?ll=39.152817,-121.649137
-
I originally put down for (2) of Kit #1
But wish to reduce my order to (1) of Kit #1
Thanks
Brian F
-
1 of kit 1 please
Thanks!
-
1 kit #1 please.
-
GITTIN CLOSE 86 Please check your order IF YOU HAVE MADE CHANGES and make sure I have updated to want you want correctly
-
Please put me down for 2 #1 kits
Thanks
John
-
Sorry I am going to have to retract my order. After some more thought I'm just not in a situation to spend any money on something I don't even have plans to use.
Please reduce my order from 1 to 0
Thanks
-
Put me down for 2 #1 kits.
they talked me into it.
Roy
-
I would like to have 1 kit 1
-
I'll take one of kit #2 please
-
Qty 1 of kit 1 please.
Thanks, Karl
-
Dropping from this particular coop.
-
I'll take 2 #1 kits thank's
-
I would like 2 - #1 Kits.
-
Put me down for 2 kit #1.
-
Instead of 2 ea. of kit #1, I now need a total of 3 ea. of kit #1.
Total = 3 ea. kit #1
-
1 qty of Kit #1 please.
-
THIS COOP IS CLOSED
UPDATE; Payment PM's will be sent out as soon as I have the final Quotes in, probally should know by the first of next week , we are looking for the backorder items
Payment PM,s being sent Please check your PM's Here are the final price . THIS DOES NOT INCLUDE SHIPPING , I will be able to put 3 kits in a small flate rate box all others will be in a MED flate rate box. IMPORTANT when paying choose GOODS and put your DLA USER NAME and what kit and how many in the comment box.
KIT 1 = $37.20 + SHIPPING
KIT 2 = $31.06 + SHIPPING
-
I am unlocking this thread for awhile , I have sent out all payment PM,s if you did not recieve one and should have post here and send me a PM also if you got one and shouldn't PLEASE do the same. HOLY COW BATMAN thats alot of MR-16 PM,s LOL
THE Payment PM's have the price of both kits , you pick the kit price for the kit you ordered
SORRY for the CONFUSION, MY BAD
-
OK I HAVE HAD TO REFUND SOME MONEY IT IS VERY IMPORTANT THAT YOU PUT YOUR DLA NAME IN THE COMMENT AREA. I do not know yalls real names. who ever this is I have sent you a refund ( Rosalie Beaty )
It seems some of yall have a email address with the same dla username but I still need it in the comment area PLEASE
-
I just figured out what happened why my payment was refunded. I did enter my DLA username and amount of kits in the 'message' area but then went up to change which account the money was to be drawn from. That change reset the message field! I did not notice that happening. I was a click away from doing it again when I glanced down and saw the field had changed. Maybe this will help others from doing the same mistake.
My apologies to Lineman for adding to his workload.
Roy
-
I just figured out what happened why my payment was refunded. I did enter my DLA username and amount of kits in the 'message' area but then went up to change which account the money was to be drawn from. That change reset the message field! I did not notice that happening. I was a click away from doing it again when I glanced down and saw the field had changed. Maybe this will help others from doing the same mistake.
My apologies to Lineman for adding to his workload.
Roy
NO problem I want to make sure I don,t mess up anyones order , Thanks for posting this may be why I have had a few refunds good catch
-
payment sent via paypal
-
im would like to get 1of the full kit, if there are any that are left
-
im would like to get 1of the full kit, if there are any that are left
Sorry but this coop is closed, we are just waiting on payments now
-
i know its closed i just like you to know if someone cant pay ill take there spot
-
Payment Sent Feb 4th, Please Recheck sent PM with email address
-
payment sent on Feb 4th as well, and you do not have me listed as paid. I have not received a refund back from paypal. If you need me to send you the paypal confirmation please let me know.
Thank you again for running this coop.
Mike Hill
-
payment sent on Feb 4th as well, and you do not have me listed as paid. I have not received a refund back from paypal. If you need me to send you the paypal confirmation please let me know.
Thank you again for running this coop.
Mike Hill
Same here; I'm hoping it's just a lack of time to update the page.
-
NOTICE; I HAVE UPDATED THE PAID LIST 2/7/12 ,Please check list and make sure it is correct as soon as the rest of the orders are paid I will order the parts. If you have paid but are not showing that you paid PLEASE let me know <pop..
UPDATE ; list has been updated 2/9/12 PLEASE CHECK , Still waiting on final payments
-
All payments need to made by MONDAY 2/20/12 so as we can order our parts any kits not paid for will go back out for sale.
Please do not post you will take these until I have posted what kits are left if any, Thanks PLEASE CHECK THE LIST AND MAKE SURE I HAVE YOUR ORDER SHOWN AS PAID.
FINAL NOTICE , I have sent out PM's and E-mails this is the last attempt at notification of payments due. After the 20th I will be putting up for sale what kits are left
BUMP; Only three payments left, if these kits are not paid for by the 20th I will have four kit1 for sale , I have already two members willing to take 2 kits so their will be two kit1 for sale if you are interested go ahead and post and if these come available I will PM the persons who got them, just trying to have a plan B in motion so I can get all payments in and order parts
-
Parts and PCB's have been ordered
-
UPDATE: PCB's have arrived and backorder parts on the way, I have some kits already to go and will be starting to ship out what I can, all the kit2 orders have already been shipped.
-
Nice job Jeff, thanks for the update.
-
Received my kit #2s.
Thanks for running the coop!!!
RM
-
25 more kits shipping tommorrow
-
Thanks for all your efforts!
-
Thanks for the heads up.
-
more shipping out tommorow , I have to wait on mouser now for the backorder parts to arrive schedule to be here on the 2/29/12 all the parts i have are sorted so when backorder gets here it won't take long only 8 members orders to do. THANKS for your paitence
-
Thanks for all the work you have done for us Lineman!
John
-
I got my kits in today! Thanks again 8)
-
All kits have shipped except for GRUMPY and RJ , Mouser owes me more 520-TCH4000-X , But I have 6 of ABRACON 40.0-EK ACH 1002 from my own stock , Grumpy I am going to shoot RJ a pm and see if these are ok to use I believe these were the original and we switched due to out of life but not sure, RJ I am speaking with another member that might have a few of these also so I am not forgettin you. The lead time for mouser is april otherwise
-
All kits have shipped except for GRUMPY and RJ , Mouser owes me more 520-TCH4000-X , But I have 6 of ABRACON 40.0-EK ACH 1002 from my own stock , Grumpy I am going to shoot RJ a pm and see if these are ok to use I believe these were the original and we switched due to out of life but not sure, RJ I am speaking with another member that might have a few of these also so I am not forgettin you. The lead time for mouser is april otherwise
No Rush as these are kits for the Academy.
RJ
-
All kits have been shipped, yes yours to GRUMPY I am sending you a pm, I want to thank ALL of yall for your patience and cooperation on making my first coop experiance nice. Also THANK to all Coop managers and staff for the assitance hopfully my packaging is ok. OH I did find 2 resistors on the floor so if you are missing one or two I KNOW WHERE THEY ARE <fp. <res. <yk..
-
I received mine yesterday (02-29-12). Thank you very much for doing the Co-op
-
I also got mine yesterday... THANKS FOR ALL OF THE WORK!!
-
Yep. Got mine. Now what to do with it.
-
Mine came today. Thanks again for all the work!
Mike
-
Mine came as well. Thanks!
-
Got it today. Ahh, the sweet smell of solder!! Thanks!
-
Got mine in the mail today! I know what I'm going to be doing shortly :)). Thanks again for all your hard work and sharing your time with us by holding this COOP.
Sent from my DROIDX using Tapatalk
-
Mine came in also today. Thanks for all you time and effort you spend doing this.
-
Mine arrive yesterday. Thanks so much for running the coop.
-Greg
-
Got mine today. Thanks for the coop. Now to find the time to build it. 8)
-
mine arrived today. Thanks for all the work.
Roy
-
Received my kits today.
Thank you for all the time you put in to run the coop.
alan
-
Got mine yesterday.
Thanks for all your time and energy to help make this hobby happen.
Jerry
-
Thanks for doing the coop! Built/tested/mounted/and ready to rock.
-
Got them. Thank you again 8)
-
all ok great job, thanks
-
:) Package came today!
-
got mine thanks
-
got mine too. Thanks! <res.
-
got mine today thanks for all the hard work
-
Thanks for running this coop
I got mine Friday.
-
Received mine yesterday,
Thank you Jeff, great job <res.
Jess
-
Received, Thanks for giving of your time to run this coop.
-
Mine were in the mail box from yesterday's delivery....West coast stop.
Thank you for handling this coop.
-
Looks like all kits have been delivered accept 2 , adminastators if you would like i believe this can be moved to finished coops. Again thanks to all
-
Got mine also... Thaks for all you did !!
Dan
-
Jeff;
Yeah! I got my very first piece of hardware.
I ordered an ether dongle, 4 lynx express and an mr16. Yours arrived first.
I was wondering if i would finish the Nutcracker software before i had any hardware in hand.
Thanks for running the coop...
i plan on getting 4 aethers and 16 smart string controllers. I then think i am ready to put it all together this summer.
thanks
sean
-
Thanks for doing this coop.
-
Thanks guys this was great I got mine last week but have been out of commission on the free time
Kevin